LT Line Improvement, Mid Span Pole in different villages of Rawatsera Area under Vijaypur Section under E.D.D. Bageshwar.

Amount

Cartage of ST Pole SP-10 from store centre Almora to construction site with loading, unloading at both points and proper stacking in average lead distance 135 Km.

Cartage of ST Pole SP-21 from store centre Almora to construction site with loading, unloading at both points and proper stacking in average lead distance 135 Km.

Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction site store including loading and unloading both ends.

Head load cartage of other small materials including loading & unloading upto 1to3Km.

Head load cartage of Pole SP-10 from road side to to work site distance upto 1-3Km.

Head load cartage of Pole SP-21 from road side to to work site distance upto 1-3Km.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for errection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surpulse excavated soil as directed complte work.

Errection of SP-10 single support poles in proper level and alignment alongwith fixing of all accessories.

Errection of SP-21 single support poles in proper level and alignment alongwith fixing of all accessories.

Grouting of Poles in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1cement:4graded stone 30mm nominal size:8coarse sand) block including cost of cement, sand and stone ballst. Back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESSPO construction manual.

Muffing of poels size 0.45cmX0.60cm radious with CC 1:3:6 (1cement:3coarse sand:6graded stone 10mm nominal size) block size 45cm height from ground level including cost of cement, sand and sand etc.

Excavation of earth for stay pit of size 0.6x0.6x1.2mtr. In all type of soil including proper dressing of sides and ramming of bottom including gettting out the excavated soill and disposal of surplus excated soil as directed complete work.

Fixing, tightening and nozzelling of LT stay with pole and stay rod of required tension as per drawing/RESSPO manual.

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8CC block including cost of cement, sand and stone ballst. Back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESSPO manuals.

Laying, Spreading, Stringing and Sagging of LT Line of the ACSR Weasel Conductor 2Phase3Wire as phase wire with GI earth wire complete with binding and jumphering as per RESSPO specification.

Laying, Spreading, Stringing and Sagging of LT Line of the ACSR Weasel Conductor 3Phase5Wire as phase wire with GI earth wire complete with binding and jumphering as per RESSPO specification.

Painting of SP-10 Poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5mtr from ground level.

Painting of SP-21 Poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminium paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5mtr from ground level.

G P ENTERPRISES

SHRI MOOLNARAYAN ELECTRICAL