Laying, commissioning of 3 phase 3-core 6.35/11KV (E) 185 sq.mm XLPE insulated power cable, Construction of 3x500KVA sub-station adjacent with Mata Tripureswari Temple, Udaipur under PRASAD scheme within the jurisdiction of MTB Electrical S/D.

Amount

Supply of 9.0 mtr. Long Steel Tubular Pole as per specification and drawing.

Supply of MS Channel (75x40x40x6mm)

Supply of MS Angle (65x65x6mm)

Supply of 11 KV Polimer Pin Insulator

Supply of 11 KV polimer Disc Insulator 45KN

Supply of 11 KV Disc Fittings (6/1/2.59)

Supply of ACSR(6/1/3.35sq.mm) RABBIT

Supply of 8 SWG GI wire (4mm)

Supply of 11KV Polymeric LA (9KV 5 KA)

Supply of 11KV DO fuse unit 3-phase (Porcelin type)

Supply of 11KV GO Switch 3-phase (Porcelin type)

Supply of PVC Cable 240 sq.mm.(1100Volt)

Supply of Re-wireable porcelin Cut out 500Amps.

Supply of Bi-metallic Lug 70sqmm (Heavy Duty)

Supply of Bi-metallic Lug 240sqmm (Heavy Duty)

Supply of MS Nuts & Bolts (16X75mm & 16x90mm)

Supply of 3-Phase, 3-Core, 6.35/11KV XLPE Cable 185 sq.mm.

Supply of 2 way (1 incomming & 1 outgoing feeder) HT (11KV) Kiosk/ 11KV outdoor type feeder piller made of 10swg MS sheet complete with aluminium basbar, HT insulator provided with locking system and painting.

Supply of 125MM dia wall thickness minimum 7.4MM, maximum 3.2MM HDPE pipe PE 100 grade PN 8

Supply of 125MM dia GI pipe (medium class)

Supply of 5KV Motorised Insulation tester

Supply of 2.5mtr. Long , 40mm dia G.I.Pipe ( Make: TATA/ JINDAL)

Supply of Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Supply of fabricated clamps of assorted size of MS Flat (50x6mm) with double coat of red oxide primer coating.

Erection & commissioning including carriage upto work site of 9.0 Mtr long Steel Tubular Pole direct in earth i/c excavation, back filling & ramming etc as reqd.(the Pole should be buried 1/6th.of their length) as per Technical specification.

Erection of fabricated M.S.Channel Cross-Arm, 2.8Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of fabricated M.S.Angle Cross-Arm, 2.8 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection & commissioning of 11KV Pin insulator along with Pin.

Erection & commissioning of 11KV Single Disc insulator set along with necessary fittings.

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &bolts, etc. as required)

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode

Febrication of different sizes Cross-Arms by MS Channel/MS Angle as per specification

Laying, Stringing & commissioning of 1KM (Single Conductor) ACSR 6/1/3.35 mm dia 'weasel' including hoisting & binding etc. Complete as required.

Erection of 9 KV, 5KA Gapless Silicon Polymeric Lightning Arrestors conform to IEC 60099-4 /IS-3070 Part-3 - 1993 with latest amendments

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Carriage of 11/0.430, 3-Phase 500KVA Transformer by Mechanical Transport from AD Nagar Store sub-division, Agartala to working site Matabari Vis-a-vis including loading, unloading and placing on base, as required,

Installation/Positioning & commissioning 3-Phase 500KVA Distribution Transformer on RCC base with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Erection & commissioning of 11KV Kiosk including necessary connection as required.

Providing and executing cement concrete work 1:2:4 (1 Cement : 2 River sand : 4 Graded well burnt brick agreegate 20mm nominal size) for grouting of Steel Tubular Pole

Removing old paint and preparing the surface with sand paper etc. of 9.00 mtr. Long steel Tubular pole

Applying priming coat with redimixed genuine red lead paint of approved quality on 9.00 mtr. Long steel Tubular pole

Painting (two or more coat as required) with alluminium paint of approved quality on 9.00 mtr. Long steel Tubular pole

Painting (two or more coat as required) with alluminium paint of approved quality on MS Channel/Angle/Clamp etc.

Laying, commissioning in/c. carriage of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. (Trench Size: Width-350mm, Hieght-1200mm / Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks)--185 sq.mm.

Laying, commissioning in/c. carriage of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp (excluding cost of Clamp and Nut&Bolts) as required --185 sq.mm.

Laying, commissioning in/c. carriage of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required --185 sq.mm.

Manually digging /drilling horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge.

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, 3-Phase XLPE aluminium conductor cable of 11 KV grade as required ----185 sq.mm.

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade ----185 sq.mm.

Providing of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

CIVIL WORK---RCC TRANSFORMER BASE Earth work in excavation in mechanical means (Hydralic excavator) / manual means in foundation trences or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming,consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: i). 1:4:8 ( 1 Cement: 4 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto floor five level. i). Mild Steel and Medium Tensile steel bars.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering, finishing and reinforcement -All work upto plinth level: i). 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing reinforcement- i). 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- i). 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc.and removal of form work for i)Foundations, footings, bases for columns etc. for mass concrete with timber plank

ii)Columns, Piers, Abutments, pillars, Posts and Struts with shuttering ply

iii)Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

iv). Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

First class brick work in foundation and plinth including cost of all materials as required complete i). In cement mortar 1:4 (1 cement:4 fine sand)

12 mm cement plaster of mix i). Cement motar 1:6 (1 cement:6fine sand)

Neat cement punning

Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.

Providing & fixing ISI marked oxidised MS sliding door bolts with nuts and screws etc.complete i).300x16mm

Painting with synthetic enamel paint having VOC (volatile organic compound) content less than 150 grams/litre of approved brand and manufacture including applying additional coats wherever required to achive even shade and colour (payment shall be made after submission of test certificate issued by the Manufacturer) i). two coats.

Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on new work (two or more coats applied @3.84kg/10sqm) complete . (payment shall be made after submission of test certificate issued by the Manufacturer) New work (two or more coats applied @3.84kg/10sqm)

Providing 1.8mtr. Height chain link fencing around sub-station areas with angle post 65x65x6mm placed every 2.5 mtr. apart embaded in cement concrete block of 30x30x60mm of 1:3:6 (1 cement : 3 River sand : 6 Jhama brick agreegate 20mm nominal size) and every 12th post and corner post to be shrutted and embeded in cement concrete block of 45x45x60 mm of same mix, both 2 post should be fitted with GI stapple of MS Flat of 6mm 1(one) suitable gate made of 50mm dia GI Pipe and chain link are to be provided within sub-station fencing (widh of gate shall be 1.2mtr. with 1.8mtr. height)

Curiosity Constructions Pvt Ltd (BID ID -151774)