CONSTRUCTION OF E-BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Excavation for foundation upto 1.5 m depth including Rupees One

sorting out and stacking of useful materials and disposing

1 5344.00 off the excavated stuff upto 50 Meter lead..(A) Loose or soft 122.94 CMT

Ninety Four Only

Excavation for foundation upto 1.5 m depth including Rupees One

sorting out and stacking of useful materials and disposing Hundred Fifty

2 1812.00 off the excavated stuff upto 50 Meter lead.(B) Dense or 157.33 CMT

Seven and Paise

Hard soil Thirty Three Only

Excavation for foundation for depth from 1.5 m to 3.0 m Rupees One

including sorting out and stacking of useful materials and Hundred Thirty Six

3 2734.00 disposing off the excavated stuff upto 50 Meter lead.(A) 136.30 CMT

and Paise Thirty

Loose or soft soil Only

Excavation for foundation for depth from 1.5 m to 3.0 m Rupees One

including sorting out and stacking of useful materials and Hundred Seventy

4 3068.00 disposing off the excavated stuff upto 50 Meter lead.(B) 170.69 CMT

and Paise Sixty

Dense or Hard soil Nine Only

Boring holes 2.1 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

5 39.00 excavated soil as directed within a lead of 50 Meter for 800.17 Hundred and Paise Each

following diameter of pipes.(ii) 250 mm Seventeen Only

Boring holes 3.5 m deep in ordinary soil (for cast in situ Rupees One

piles) and getting out the soil and disposal of the surplus Thousand Three

6 29.00 excavated soil as directed within a lead of 50 Meter for 1333.61 Hundred Thirty Each

following diameter of pipes.(ii) 250 mm Three and Paise

Box cutting the road surface to proper slop and camber for Rupees One

road work including a base for road work including Hundred Nine and

7 5452.00 removing the excavated stuff depositing on the road side 109.24 CMT

Paise Twenty Four

slop as directed up to 50.0 mt. Lead. Only

Providing and laying cement concrete 1:3:6 (1 cement :

coarse : 6 Hand broken stone aggregates 40 m.m. nominal Rupees Three

size) and curing complete excluding cost of form work in : Thousand Twenty

(A) foundation and plinth. Five and Paise

Ninety Nine Only

Providing and laying cement concrete 1:4:8 (1- Cement :

Coarse sand : 8- Graded Brick bats aggregate 40mm normal

size) and curing complete excluding cost of formwork in Thousand Seven

(A) Foundation and Plinth Hundred and Paise

Forty Five Only

Providing and laying controlled cement concrete M.250

and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

10 4.00 Foundations, footings, Base of columns and Mass concrete 4330.79 Hundred Thirty CMT

(Augur pile) and Paise Seventy

Providing & Laying cement concrete M-250 for R.C.C. using

12 to 20 mm size black trap metal of approved quality as an

aggregate incl. watering, curing, scaffolding, centering incl. Rupees Four

using machine mixed design cement concrete & compacted

with vibrators incl. finishing the surface etc. as directed as

11 986.00 4552.87 Hundred Fifty Two CMT

per detailed drawing & design & as instructed by the

and Paise Eighty

engineer incharge etc.complete [Excl.M.S. Reinforcement]

(A) foundation, footing, base of columns and mass concrete Seven Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing & Laying cement concrete M-250 for R.C.C.

column using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Seven

scaffolding, centering incl. using machine mixed design Thousand Eight

12 195.00 cement concrete & compacted with vibrators incl. finishing 7876.63 Hundred Seventy CMT

the surface etc. as directed as per detailed drawing & Six and Paise Sixty

design & as instructed by the engineer incharge Three Only

etc.complete [Excl.M.S. Reinforcement](B) Columns (UP

TO PLINTH LEVEL)

Providing & Laying cement concrete M-250 for R.C.C.

column using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Three

13 45.00 cement concrete & compacted with vibrators incl. finishing 6327.85 Hundred Twenty CMT

the surface etc. as directed as per detailed drawing & Seven and Paise

design & as instructed by the engineer incharge Eighty Five Only

etc.complete [Excl. Reinforcement](B) Columns Uup to

Providing & Laying cement concrete M-250 for R.C.C.

Beams using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Three

14 209.00 cement concrete & compacted with vibrators incl. finishing 6327.85 Hundred Twenty CMT

the surface etc. as directed as per detailed drawing & Seven and Paise

design & as instructed by the engineer incharge Eighty Five Only

etc.complete [Excl.M.S. Reinforcement] (C) Beams (UP TO

Providing & Laying cement concrete M-250 for R.C.C. Wall

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement

concrete & compacted with vibrators incl. finishing the

15 165.00 6791.69 Hundred Ninety CMT

surface etc. as directed as per detailed drawing & design &

One and Paise Sixty

as instructed by the engineer incharge etc.complete

[Excl.M.S. Reinforcement] (E)R.C.C. Wall (UP TO PLINTH Nine Only

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -

16 182.00 fine sand)(B) Conventional (PLINTH TO GROUND FLOOR) 4214.33 Hundred Fourteen CMT

and Paise Thirty

Filling available excavated earth (excluding rock) in Rupees One

trenches. plinth, sides of foundations etc. in layers not Hundred Thirty Six

17 9202.86 exceeding 20 cm. in depth consolidating each disposited 136.92 CMT

and Paise Ninety

layer by ramming and watering. Two Only

Filling in foundation and plinth with murrum or selected

soil in layers of 20cm. Thickness including watering,

ramming and consolidating etc. complete. Hundred Sixty Nine

and Paise Seventy

Filling in plinth with sand under floors including watering Rupees Four

ramming, consolidating and dressing complete Hundred Eighty

Rolling and Consolidating of soling including filling in

depression which occurs during the process with power

roller 8 tonne to 12 tonne. and compacting the bed as per

20 10763.00 22.75 Two and Paise CMT

specifications to core test 97% compacting complete in all

Seventy Five Only

respects to the entire satisfaction of the Engineer-in -

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and laying cement concrete work 1:2:4 (1- Rupees Four

Cement : 2- Coarse sand : 4- graded stone aggregates

Thousand Twenty

21 217.00 mm nominal size) and curing complete excluding cost of 4029.02 CMT

Nine and Paise Two

formwork and reinforcement for reinforced concrete work

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using Chlordene andChiorpurfiles 20 EC. Rupees One

As Per 6131_paret-II Consentration Weight one percent is Hundred Twenty

recommended i.e one litre 20 EC chemical emulsion with Four and Paise

19 liter give 1 % concrentration inclusive of one litre Thirty Five Only

chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Providing & Laying cement concrete M-250 for R.C.C.

column using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Seven

scaffolding, centering incl. using machine mixed design Thousand Nine

23 97.00 cement concrete & compacted with vibrators incl. finishing 7917.56 Hundred CMT

the surface etc. as directed as per detailed drawing & Seventeen and

design & as instructed by the engineer incharge Paise Fifty Six Only

etc.complete [Excl.M.S. Reinforcement](B) Columns

Providing & Laying cement concrete M-250 for R.C.C.

column using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Seven

scaffolding, centering incl. using machine mixed design Thousand Nine

24 33.00 cement concrete & compacted with vibrators incl. finishing 7958.50 Hundred Fifty Eight CMT

the surface etc. as directed as per detailed drawing & and Paise Fifty

design & as instructed by the engineer incharge Only

etc.complete [Excl.M.S. Reinforcement](B) Columns

Providing & Laying cement concrete M-250 for R.C.C.

Beams using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Three

25 121.00 cement concrete & compacted with vibrators incl. finishing 6327.85 Hundred Twenty CMT

the surface etc. as directed as per detailed drawing & Seven and Paise

design & as instructed by the engineer incharge Eighty Five Only

etc.complete [Excl.M.S. Reinforcement] (C) Beams

Providing & Laying cement concrete M-250 for R.C.C.

Beams using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Three

26 121.00 cement concrete & compacted with vibrators incl. finishing 6368.79 Hundred Sixty CMT

the surface etc. as directed as per detailed drawing & Eight and Paise

design & as instructed by the engineer incharge Seventy Nine Only

etc.complete [Excl.M.S. Reinforcement] (C) Beams (FIRST

Providing & Laying cement concrete M-250 for R.C.C.

Beams using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Four

27 7.00 cement concrete & compacted with vibrators incl. finishing 6409.72 Hundred Nine and CMT

the surface etc. as directed as per detailed drawing & Paise Seventy Two

design & as instructed by the engineer incharge Only

etc.complete [Excl.M.S. Reinforcement] (C) Beams

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing & Laying cement concrete M-250 for R.C.C. slab

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement Thousand Four

28 165.00 concrete & compacted with vibrators incl. finishing the 6430.25 Hundred Thirty CMT

surface etc. as directed as per detailed drawing & design & and Paise Twenty

as instructed by the engineer incharge etc.complete Five Only

[Excl.M.S. Reinforcement] ( D) Slabs (GROUND FLOOR)

Providing & Laying cement concrete M-250 for R.C.C. slab

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement Thousand Four

29 135.00 concrete & compacted with vibrators incl. finishing the 6471.18 Hundred Seventy CMT

surface etc. as directed as per detailed drawing & design & One and Paise

as instructed by the engineer incharge etc.complete Eighteen Only

[Excl.M.S. Reinforcement] ( D) Slabs (FIRST FLOOR)

Providing & Laying cement concrete M-250 for R.C.C. slab

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement Thousand Five

30 10.00 concrete & compacted with vibrators incl. finishing the 6512.12 Hundred Twelve CMT

surface etc. as directed as per detailed drawing & design & and Paise Twelve

as instructed by the engineer incharge etc.complete Only

[Excl.M.S. Reinforcement] ( D) Slabs (SECOND FLOOR)

Providing & Laying cement concrete M-250 for R.C.C.

Staircase using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Seven

31 10.00 cement concrete & compacted with vibrators incl. finishing 6762.62 Hundred Sixty Two CMT

the surface etc. as directed as per detailed drawing & and Paise Sixty Two

design & as instructed by the engineer incharge Only

etc.complete [Excl.M.S. Reinforcement] (E)Staircase

Providing & Laying cement concrete M-250 for R.C.C.

Staircase using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design

32 10.00 cement concrete & compacted with vibrators incl. finishing 6803.55 CMT

Hundred Three and

the surface etc. as directed as per detailed drawing &

Paise Fifty Five Only

design & as instructed by the engineer incharge

etc.complete [Excl.M.S. Reinforcement] (E)Staircase (FIRST

Providing & Laying cement concrete M-250 for R.C.C. Lintel

work using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Seven

centering incl. using machine mixed design cement Thousand Seven

33 10.00 concrete & compacted with vibrators incl. finishing the 7725.55 Hundred Twenty CMT

surface etc. as directed as per detailed drawing & design & Five and Paise Fifty

as instructed by the engineer incharge etc.complete Five Only

[Excl.M.S. Reinforcement] (G) Lintel (GROUND FLOOR)

Providing & Laying cement concrete M-250 for R.C.C. Lintel

work using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Seven

centering incl. using machine mixed design cement Thousand Seven

34 8.00 concrete & compacted with vibrators incl. finishing the 7766.49 Hundred Sixty Six CMT

surface etc. as directed as per detailed drawing & design & and Paise Forty

as instructed by the engineer incharge etc.complete Nine Only

[Excl.M.S. Reinforcement] (G) Lintel (FIRST FLOOR)

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing & Laying cement concrete M-250 for R.C.C. Lintel

work using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Seven

centering incl. using machine mixed design cement Thousand Eight

35 2.00 concrete & compacted with vibrators incl. finishing the 7807.42 Hundred Seven CMT

surface etc. as directed as per detailed drawing & design & and Paise Forty

as instructed by the engineer incharge etc.complete Two Only

[Excl.M.S. Reinforcement] (G) Lintel (SECOND FLOOR)

Providing & Laying cement concrete M-250 for R.C.C.

Chhajjah work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand One

36 19.00 cement concrete & compacted with vibrators incl. finishing 6130.39 Hundred Thirty CMT

the surface etc. as directed as per detailed drawing & and Paise Thirty

design & as instructed by the engineer incharge Nine Only

etc.complete [Excl.M.S. Reinforcement] ( H) Chhajja

Providing & Laying cement concrete M-250 for R.C.C.

Chhajjah work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand One

37 16.00 cement concrete & compacted with vibrators incl. finishing 6171.32 Hundred Seventy CMT

the surface etc. as directed as per detailed drawing & One and Paise

design & as instructed by the engineer incharge Thirty Two Only

etc.complete [Excl.M.S. Reinforcement] ( H) Chhajja

Providing & Laying cement concrete M-250 for R.C.C.

Chhajjah work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Two

38 2.00 cement concrete & compacted with vibrators incl. finishing 6212.26 Hundred Twelve CMT

the surface etc. as directed as per detailed drawing & and Paise Twenty

design & as instructed by the engineer incharge Six Only

etc.complete [Excl.M.S. Reinforcement] ( H) Chhajja

Providing & Laying cement concrete M-250 for R.C.C.

Coping work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Three

39 25.00 cement concrete & compacted with vibrators incl. finishing 6375.41 Hundred Seventy CMT

the surface etc. as directed as per detailed drawing & Five and Paise

design & as instructed by the engineer incharge Forty One Only

etc.complete [Excl.M.S. Reinforcement] (I) Coping

Providing & Laying cement concrete M-250 for R.C.C.

Coping work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Four

40 20.00 cement concrete & compacted with vibrators incl. finishing 6416.35 Hundred Sixteen CMT

the surface etc. as directed as per detailed drawing & and Paise Thirty

design & as instructed by the engineer incharge Five Only

etc.complete [Excl.M.S. Reinforcement] (I) Coping (FIRST

Providing & Laying cement concrete M-250 for R.C.C.

Coping work using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Four

41 8.00 cement concrete & compacted with vibrators incl. finishing 6457.28 Hundred Fifty CMT

the surface etc. as directed as per detailed drawing & Seven and Paise

design & as instructed by the engineer incharge Twenty Eight Only

etc.complete [Excl.M.S. Reinforcement] (I) Coping

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and laying controlled cement concrete work Rupees Six

M200 and curing complete including the cost of form work Thousand Three

42 11.00 but excluding reinforcement of reinforced concrete work in 6316.91 Hundred Sixteen CMT

: (C ) Coping and Paise Ninety

Providing & Laying cement concrete M-300 for R.C.C.

column using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Eight

scaffolding, centering incl. using machine mixed design

Thousand Thirty

43 2.00 cement concrete & compacted with vibrators incl. finishing 8035.22 CMT

the surface etc. as directed as per detailed drawing &

Twenty Two Only

design & as instructed by the engineer incharge

etc.complete [Excl.M.S. Reinforcement](B)

Columns{PUMP ROOM)

Providing & Laying cement concrete M-300 for R.C.C.

Beams using 12 to 20 mm size black trap metal of

approved quality as an aggregate incl. watering, curing, Rupees Six

scaffolding, centering incl. using machine mixed design Thousand Four

44 1.00 cement concrete & compacted with vibrators incl. finishing 6486.44 Hundred Eighty Six CMT

the surface etc. as directed as per detailed drawing & and Paise Forty

design & as instructed by the engineer incharge Four Only

etc.complete [Excl.M.S. Reinforcement] (C) Beams

Providing & Laying cement concrete M-300 for R.C.C. slab

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement Thousand Four

45 54.00 concrete & compacted with vibrators incl. finishing the 6472.53 Hundred Seventy CMT

surface etc. as directed as per detailed drawing & design & Two and Paise Fifty

as instructed by the engineer incharge etc.complete Three Only

[Excl.M.S. Reinforcement] ( D) Slabs

Providing & Laying cement concrete M-300 for R.C.C. Wall

using 12 to 20 mm size black trap metal of approved

quality as an aggregate incl. watering, curing, scaffolding, Rupees Six

centering incl. using machine mixed design cement Thousand Nine

46 61.00 concrete & compacted with vibrators incl. finishing the 6950.28 Hundred Fifty and CMT

surface etc. as directed as per detailed drawing & design & Paise Twenty Eight

as instructed by the engineer incharge etc.complete Only

[Excl.M.S. Reinforcement] (E)R.C.C. Wall

Providing TMT Bar FE 500/500D reinforcement for R.C.C.

work including bending, binding and placing in position

47 266630.00 complete (GROUND FLOOR) 77.29 Seven and Paise kg

Twenty Nine Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. Rupees Seventy

48 64805.00 work including bending, binding and placing in position 78.34 Eight and Paise kg

complete (FIRST FLOOR) Thirty Four Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. Rupees Seventy

49 9590.00 work including bending, binding and placing in position 79.39 Nine and Paise kg

complete (SECOND FLOOR) Thirty Nine Only

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - Thousand Four

fine sand)(B) Conventional Hundred Ninety Six

and Paise Five Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and laying Autoclaved aerated light weight

Concrete (AAC) block masonary using 600/625 X 200/240

X 225/150 mm thick AAC (Cellular) block of Aerocon,

Magicrete, Biltech, Litecone,Ecolite, Xtralite, Ascolite

make[autoclaved aerated block] having compressive

strength for Grade 1 shall not be less than 4N/mm2

51 428.00 (confirming to IS : 2185, Part III),using readymade premix 6456.06 CMT

Hundred Fifty Six

tensile adhesive mixture for joining AAC block which

and Paise Six Only

should approved by engineer in charge etc. complete

instead of Cement Mortar including scaffolding, curing,

raking joints, filling joints etc. complete as per Technical

Specification and drawings. (GROUND FLOOR)

Providing and laying Autoclaved aerated light weight

Concrete (AAC) block masonary using 600/625 X 200/240

X 225/150 mm thick AAC (Cellular) block of Aerocon,

Magicrete, Biltech, Litecone,Ecolite, Xtralite, Ascolite

make[autoclaved aerated block] having compressive Rupees Six

strength for Grade 1 shall not be less than 4N/mm2 Thousand Four

52 239.00 (confirming to IS : 2185, Part III),using readymade premix 6498.49 Hundred Ninety CMT

tensile adhesive mixture for joining AAC block which Eight and Paise

should approved by engineer in charge etc. complete Forty Nine Only

instead of Cement Mortar including scaffolding, curing,

raking joints, filling joints etc. complete as per Technical

Specification and drawings.(FIRST FLOOR)

Providing and laying Autoclaved aerated light weight

Concrete (AAC) block masonary using 600/625 X 200/240

X 225/150 mm thick AAC (Cellular) block of Aerocon,

Magicrete, Biltech, Litecone,Ecolite, Xtralite, Ascolite

make[autoclaved aerated block] having compressive Rupees Six

strength for Grade 1 shall not be less than 4N/mm2 Thousand Five

53 82.00 (confirming to IS : 2185, Part III),using readymade premix 6540.92 Hundred Forty and CMT

tensile adhesive mixture for joining AAC block which Paise Ninety Two

should approved by engineer in charge etc. complete Only

instead of Cement Mortar including scaffolding, curing,

raking joints, filling joints etc. complete as per Technical

Specification and drawings. (SECOND FLOOR)

Providing and fixing chicken wiremesh jali at R.C.C. Rupees Two

masonry joints at any height with all labour & material etc. Hundred Forty Five

54 2564.00 complete. 245.86 SMT

and Paise Eighty Six

Providing and fixing flush door both side laminated shutter

fabricated from 35 mm thick solid core malemine faced

three layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin having Rupees Two

stemped IS 12823 grade I type II including three coats of

lacquer polishing to exposed wooden surfaces and

55 148.00 2712.13 Hundred Twelve SMT

Stainless steel decorative type designs Including 4 hinges

and Paise Thirteen

and all fixtures/fastning and Accessories etc. including

I.T.W. triangular batten patti of size 30 mmX30 mm etc as Only

per architectural detailed drawing and as directed by

engineer in charge.

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the ends Rupees Three

by end locks mounted on specially designed pipe shaft with Thousand Five

56 74.00 bracket plates, guide channels and arragements for inside 3554.40 Hundred Fifty Four SMT

and outside locking with push-pull operation including the and Paise Forty

cost of hood cover and spring etc. complete.(A) Shutters Only

having width below 3.5 M.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing of 12 mm tk toughned GLASS DOORS

using Dorma Xl-C 4001 Glass Door PKG EN 3 (Top Patch-1,

Bottom patch-1, Floor Spring-1, Corner Lock-1); Dorma Xl-

C 4003 A Patch fitting for overpanel and sidelight; Dorma Rupees Fifty Seven

Xl-C 4004 A Connector for overpanel and Sidelight; Dorma

Xl-C 4006 Central Connector; Dorma Xl-C 4008 Side

57 2.00 57972.26 Hundred Seventy NO.

Connector; Dorma Xl-C 3000 H Type Handle 400x22 CTC

300 AND AS PER DRAWING including all

acceessories,locks, material, silicone,labour,installation, Twenty Six Only

Hole & slote charges etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in

Providing and fixing Semi unitized vision panel with glazed

units (SGU)of size as per design and consisting of 6 mm

thick (toughened)glass approved by the architect. with

mullion (101mmx57mmx1.8mm, 8.9 kg/12 rft), transum

(63mmx57mmx1.8mm, 5.8 kg/12 rft), sub frame

(54mmx22mmx1.25mm, 2.4kg/12 rft), with

anodizing,with m.s. hot deep galvanized bracket,with s.s.

hardware The glazed panel to be formed by means of

imported special structural quality silicon adhesive sealant

58 11.00 8080.00 Thousand Eighty SMT

layer manufactured by M/s. Dow Corning 995 USA with

material:- silicone dowcorring 789weather silicone in

dow corring.It includes cost of labour, materials,

accessories, adhesives,all required M.S FABRICATIONS,

scaffolding, wastages, transport, taxes, fixing into a neat

finish in aesthetic point of view, without any undulations in

facias all complete as per drawing and Instruction of

engineer in-charge..

(Top hung or Pivoted Openable part) of size (1.21m. x

1.50m or as Per Drawing) Providing and fixing openable

hardware for glazing as per detail ,It includes cost of Rupees Fifteen

labour, materials, accessories,aII required M.S

59 2.00 FABRICATlONS, adhesives, scaffolding, wastages, transport, 15301.50 NO.

Hundred One and

taxes, fixing into a neat finish in aesthetic point of view,

Paise Fifty Only

without any undulations in facias all complete as per

drawing and Instruction of engineer in-charge.

Providing and fixing EX-CEL or Equivalent make White or

coloured water proof Solid PVC Sheet made up of Poly

Vinyl Chloride PVC resins solid high pressure density

to 0.70 Kg/m3 molded sheet of 25 mm thickness as per

required size door shutter in single sheet panel in cut to Rupees Three

size with both side 0.4mm thk and 4feet width self

adhesive furniture film Solid including SS hinges with

60 22.00 3785.08 Hundred Eighty SMT

necessary screws and SS fixtures and fastening etc. comp.

As per Architect instructions and drawing or as directed

by engineer in charge.Hardware SS 304 Hinges size Eight Only

127x76x3.4mm, 15 cm Door Handle both side of shutter

,two nos. of 30 cm long ss Aldrop and 20 cm long Tower

Bolt with Round Bar 12mmØ,

Providing and fixing FRP frame size 125x65 mm and

35mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ Rupees Two

alongwith embedded wooden pieces for stiffening & also Thousand

taking hinges & fintures. The whole FRP frame & shutter is Nineteen and Paise

to be water proof weather proof,termite proof & resistance Ninety Eight Only

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures & fastenings.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x Rupees One

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

62 86.00 1713.70 Hundred Thirteen SMT

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

and Paise Seventy

0.457 Kg/mt with 5 mm thick transparent bronze colour Only

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x Rupees One

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of Thousand Five

63 167.00 horizontal member size 40 mmx18mm x1.29mm @ wt.of 1583.95 Hundred Eighty SMT

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 Three and Paise

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent Ninety Five Only

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium Rupees One

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Thousand One

64 117.00 Kg/mt with colour anodized alluminium frame for 1175.56 Hundred Seventy SMT

ventilation with 5mm thick frosted glass as details etc Five and Paise Fifty

complete for Ventilation Six Only

Providing and fixing 0.75 meter wide and 0.80 meter hight

sand which type platform including supplying and fixing Rupees Four

granite stone 18 mm thick mirror polished stones in top

and side position and vertical strip at front over 25 mm

65 5.00 4621.47 Hundred Twenty SMT

thick polished kotah stone platform fixing in top and sides

and intermediates supports fixing with cement mortar and

adhesive and finishing etc complete. Forty Seven Only

Providing & fixing M.S. Grills of required members like

angle, tee, flat patti, round / square bar, square / round Rupees One

pipe of required size as per detail drawing & design incl.

Hundred Nineteen

66 12815.00 cutting, welding, jointing & fixing in line & level as 119.37 KG.

and Paise Thirty

instructed by engineer in charge incl. applying one coat of

anti corrosive paint & two coat of approved quality oil

paint etc. comp. as directed.

Providing and Fixing 90 cm high stainless steel railing

made from anticorrosive 304 grade S.S. Staircase Railing

modular type welded fitting (S-Rail SR11 Square Type Steel

Baluster),Main hand Rail pipe (DASA Pipe) 50mm outer dia Rupees Three

1.6 mm Thickness SS 304 Grade, Balustar steel square type

32X32mm outer dia. 1.6mm thickness ss 304 pipe, 3 pipe

67 58.00 3181.06 Hundred Eighty RMT

below main dasa pipe 16 mm outer dia. 1.6mm thickness

One and Paise Six

ss304 grade as a vertical support fixed in RCC S.S. pipe

with steel modular type fitting baluster including all type Only

accessories as per detailed drawing as directed etc.

complete for all floors.

Clearing and grubbing road land including uprooting rank

Rupees Thirty Four

vegetation grass bushes,shrubs,sapling and trees girth up

to 300 mm removal of stumps of trees cut earlier and

68 2.41 disposal of unserviceable materials (C) By mechanical 34889.38 Hundred Eighty HECTRE.

means in area of light jungle Nine and Paise

Thirty Eight Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement: 6 Rupees One

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

69 895.00 1476.54 Hundred Seventy SMT

flooring and jointed with color cement slurry including

Six and Paise Fifty

finised with flush pointing & cleaning the surface etc.

complete for light shade Four Only

Providing and laying Vitrified tiles 8 to 10 mm thick , in Rupees One

skrting risers of steps and dedo on 10mm thick cement Thousand One

70 684.00 plaster 1:3 (1-cement : 3-coarse sand) and jointed with 1195.02 Hundred Ninety SMT

white cement slurry Five and Paise Two

P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement: 6 Rupees One

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

71 167.00 1467.72 Hundred Sixty SMT

flooring and jointed with color cement slurry including

Seven and Paise

finised with flush pointing & cleaning the surface etc.

complete for antiskit Seventy Two Only

Providing and laying granite slab 18mm thick in flooring

over 20mm (Average) thick base of cement mortar 1:6 (1- Rupees Two

cement : 6-coarsesand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

72 133.00 2485.08 Hundred Eighty SMT

mixed with pigment to match the shade of slab including

rubbing, polishing and making finished grooves etc.

complete colour and shed as approved by achitect and Eight Only

engineer in charge.

Providing and laying polished Granite Slab 18mm thick in

Risers of steps, Dedo,Door and Window Frame sill, Jambs Rupees Two

and pillars laid on 10mm thick cement mortar 1:3 (

cement : 3 coarse sand ) and jointed with grey cement

73 496.00 2641.96 Hundred Forty One SMT

slurry with matching pigment incl. rubbing and polishing

and Paise Ninety

half rounding edge and edge finished for Granite etc.

complete colour and shed as approved by achitect and Six Only

engineer in charge.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1- Rupees One

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

Thousand Thirteen

74 1509.00 coarse sand) laid over and jointed with grey cement slurry 1013.87 SMT

and Paise Eighty

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick Rupees One

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

75 520.00 1144.15 Hundred Forty SMT

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

etc. complete. Fifteen Only

Providing and laying white glazed tiles 6mm thick in Rupees Nine

flooring treads of steps and landing laid on a bed of 12mm Hundred Sixty

76 95.00 thick cement mortar 1:3 (1-cement : 3-coarse sand ) 963.12 SMT

Three and Paise

finishing with flush pointing in white cement. Twelve Only

Providing and laying white glazed tiles 6mm thick in Rupees One

skrting risers of steps and dedo on 10mm thick cement Thousand One

77 308.00 plaster 1:3 (1-cement : 3-coarse sand) and jointed with 1127.48 Hundred Twenty SMT

white cement slurry Seven and Paise

Forty Eight Only

Providing 15mm thick cement plaster in single coat on Rupees One

Rough (Similar)side of single or half brick walls for interior

Hundred Sixty One

78 4084.00 plastering upto floor two level and finished even and 161.20 SMT

and Paise Twenty

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing 15mm thick cement plaster in single coat on Rupees One

Rough (Similar)side of single or half brick walls for interior

79 1977.00 plastering upto floor two level and finished even and 185.09 SMT

Five and Paise Nine

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rupees Two

Rough (Similar)side of single or half brick walls for interior

Hundred Eight and

80 394.00 plastering upto floor two level and finished even and 208.99 SMT

Paise Ninety Nine

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 10mm thick cement plaster in single coat on Rupees One

brick/concrete walls for interior plastering upto floor two

81 1281.00 level and finished even and smooth in (ii) Cement mortar 148.32 SMT

Eight and Paise

1:4 (1-cement :4-sand)(GROUND FLOOR) for CEILING

Thirty Two Only

Providing 10mm thick cement plaster in single coat on Rupees One

brick/concrete walls for interior plastering upto floor two

Hundred Seventy

82 851.00 level and finished even and smooth in (ii) Cement mortar 170.21 SMT

and Paise Twenty

1:4 (1-cement :4-sand) (FIRST FLOOR) for CEILING

Providing 10mm thick cement plaster in single coat on Rupees One

brick/concrete walls for interior plastering upto floor two

83 48.00 level and finished even and smooth in (ii) Cement mortar 192.09 SMT

Two and Paise Nine

1:4 (1-cement :4-sand) (SECOND FLOOR) for CEILING

20mm thick sand faced cement plaster on walls upto height Rupees Three

10 metres above ground level consisting of 12mm thick

Hundred Fifteen

84 7118.00 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 315.69 SMT

and Paise Sixty

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.(All Floor)

Providing 20 mm thick water proof cement plaster using

water proofing powder 1Kg/1bag of cement for all floors

on brick / concrete wall work using water proofing

materials in C M 1: 4 ( 1 cement 4 coasrse sand) including Rupees Two

finishing with a flooting coat of neat cement slurry etc

85 717.00 complete for all floor. and shall be guaranteed for minimum 291.89 SMT

period of 10 years after handing over the completed

Eighty Nine Only

building by the main contractor to be finished as directed.

Stamp paper guarantee 10 years to be furnished before

receiving any payment from the client.

Applying two coats of Birla or Asian acrylic Lapy (putty),

two coats of primer and Wall painting (two coats) with

plastic emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade Rupees One

including throughly brushing the surface free from mortar Hundred Twenty

droppings and other foreign matter and sand papered Four and Paise

smooth. (Rate includes cost of colour, required scaffolding, Ninety Six Only

watering, or any other equipments required to given an

even & good look) (For wall & similar surfaces)

Applying two coats of Birla or Asian acrylic Lapy (putty),

two coats of primer to ceilings and sloping roofs and

painting(two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall Rupees One

surface to give an even shade including throughly brushing

87 2180.00 the surface free from mortar droppings and other foreign 130.48 SMT

and Paise Forty

matter and sand papered smooth. (Rate includes cost of

colour, required scaffolding, watering, or any other

equipments required to given an even & good look) (For

ceilings and sloping roofs)

Applying two coats of primer of approved brand and

manufacture on new wall surface to give an even shade Rupees Forty and

88 2145.00 including thoroughly brushing the surface free from 40.59 Paise Fifty Nine SMT

mortar dropping and other foreign matter and sand Only

papered smooth.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Finishing wall with weather proof exterior emulsion paint Rupees One

on wall surface (two coats) to give an required shape even

89 5327.00 shade after thoroughly brushing the surface to remove all 120.26 SMT

and Paise Twenty

dirt, and remains of loose powdered materials.etc complete

Providing & applying single coat of textured at external

surface at all floor levels with three coats of weather proof

cement exterior paint of approved standard brands make

(Asian/Dulux/Narolac) at outer side of the building on RCC

or Masonary walls. Rate to include for all labour, materials,

staging, scaffolding, cleaing, curing etc. application of Rupees Five

texture after throughly brushing th`e surface to give an Hundred Sixteen

even shade free from mortar dropping/other foreign and Paise Eighty

matter etc. complete. application of textures & paints must Seven Only

be as per company's standard instructions. Texture and

colour selection as per approved by engineer in charge.(It

is recommended to use low voc paints rated by IGBC)

Providing throating or plaster drip and moulding to R.C.C.

Rupees Forty Three

91 423.00 Chajja etc.comp 43.05 RMT

and Paise Five Only

Prov.20mm deep finished groove etc.comp Rupees Twenty

92 10465.45 22.22 Two and Paise RMT

Twenty Two Only

Providing and laying water proofing treatment in sunken

portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed

with water proofing cement compound @ 0.253 kg/ sqm.

This layer will be allowed to air cure for 4 hours.

93 196.00 (b) Second layer of slurry of cement @ 0.242 kg/sqm 617.05 SMT

mixed with water proofing cement compound @

Paise Five Only

kg/sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry

with polymer mixed slurry.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over the

R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

25 mm to 100 mm size with 50% of cement mortar 1:5 (1

Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm th. in C.M. Rupees Four

1:4 added with special water proofing compound Hundred Ninety

94 1284.00 confirming to IS:2645 & top smooth finished with trowel 495.30 SMT

with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the

parapet & other adjoining wall up to height of about

mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness

at khurra as 65 mm. (c) The whole terrace so finished shall

be flooded with water for a minimum period of two weeks

for curing and for final test. All above operations to be

down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to Rupees Seven

be tempered to bring mortar creme out upto surface using Hundred Seventy

white cement including rounding off junctions and Nine and Paise

extending them upto 15 cm along the wall,clearing with Seventy Only

water and oxalic acid etc. as directed.

Providing cement vata (10 cm x 10 cm size) quarter round

in cement mortar 1 :1 including neat cement finishing

96 847.00 watering etc. complete. 24.28 Four and Paise RMT

Twenty Eight Only

Providing & fixing of Fix louver work (Vertical) having

main frames both verticals and horizontals fabricated of Rupees Five

Anodized Aluminium rectangle hollow pipes of 100 mm x

50 x 3.0 mm with colour anodized 20 micron (silver) thick

97 69.00 5633.78 Hundred Thirty SMT

including all hardware,labour,scafolding,fixtures,fastners

Three and Paise

transport and all other taxes etc. complete as per details

drawing and instruction of EIC. at all floor levels. Seventy Eight Only

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm Rupees Seven

diameter with bitumen and G.I. limpet washer or G.I. limpet Hundred Thirty

washer. filled with white lead complete excluding the cost Four and Paise

of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. Nineteen Only

Providing & fixing 150mm wide 450mm over all Rupees Five

semicircular plain G.I. sheet class-3 gutter with iron

99 12.00 brackets 40mm x 3mm size bolts, nuts, washers etc. 581.41 Sq.Mt.

including marking necessary connection with rain water

pipes. (i) 0.63mm thick

Painting two coats (including priming coat ) on new steel & Rupees One

other metal surfaces with enamel paint brushing interior to

100 259.00 give an even shade including cleaning the surface of all dirt 128.62 Sq.Mt.

Eight and Paise

, dust & other foreign matter.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing & fixing in position partly fixed and partly

openable standard extruded Aluminium door with color

anodized hollow section frame of approved shade &

pivoted double shutter fabricated from alluminium

standard section for outer frame size 101 mm x 44.5 mm

(of app. Wt. 1.2 kg / Rmt) and door styles and toprial of

alluminium section size 47.5mm x 44.5 mm (of app. Wt.

1.05 kg/ Rmt) Bottom rail & lockrail for door of size Rupees Three

114mm x 44.5mm (of app. Wt Kg./Rmt) and providing

rubber gasket and glazing chips around the glass allover

101 14.00 3206.96 Hundred Six and Sq.Mt.

including providing heavy handle, heavy lock, bracket,

Paise Ninety Six

stoppers,Aldrop (Color anodised) 5 mm th. transparent

float glass of copper tint (Structural Glass) fixed with Only

rubber gasket and 19 x 17 mm size Glasing Clip same in

Bottom Portion with providing 9 mm thick decorative

water proof Both side prelaminataed pressed wood based

board with fixing Glasing clips 19 X 17 mm including all

required materials labours and equipments as per detailed

drwg. as directed.

Providing & fixing in position standard extruded

Aluminium Partition with Colour anodized hollow section

frame of approved shade & pivoted without shutter

fabricated from alluminium standard section for outer

frame size 101 mm x 44.5 mm (of app. Wt. 1.2 kg / Rmt.) Rupees One

and using Glasing Clips of weight of 0.15 kg per running Thousand Five

102 47.00 meter and providing rubber gasket around the glass 1527.31 Hundred Twenty Sq.Mt.

allover including providing 5 mm th. transparent float Seven and Paise

glass of copper/ gray tint (Structural Glass) fixed with Thirty One Only

transparent silicon gasket and in bottom panel 12 mm

thick prelaminated bothside partical board including all

required materials labours and equipments as per detailed

drwg. as directed.

Providing and fixing water closet squatting Pan (Indian Rupees Nine

type W.C. Pan) size 580mm (Earthwork, bed concrete, foot

103 9.00 reste and trap to be measured and paid for separately) (A) 987.14 NO.

Seven and Paise

Vitreous China.(I) Long pattern = White colour

Providing & fixing wash down Water closet (European

type W.C.Pan of Cera or Hindware brand)with integral 'P'

or 'S' trape including jointing the trape with soil pipe in Rupees Two

cement mortar 1:1[1-Cement:1-Fine sand], plastic seat and Thousand Three

104 28.00 cover for wash down water closet with C.P.Brass hinges, 2364.97 Hundred Sixty Four NO.

Jet spray heavy duty with S.S. Braided hose 60 cm long, and Paise Ninety

brass screw down stop tap and rubber buffers. [A] Vitreous Seven Only

China pattern in white colour

Providing and fixing Urinal of approved quality including Rupees One

connection with trap and with integral longitudinal flush Thousand Six

105 19.00 pipe.(A) Squating plate pattern white earthenware 1628.53 Hundred Twenty NO.

550mm x 300mm. Eight and Paise

Fifty Three Only

Providing & fixing flat back Wash Basin of of Cera or

Hindware brand of size 550x400 mm with single hole for

pillar tap with C.I. or M.S.brackets painted white including Rupees Two

cutting holes and making good the same including

106 16.00 C.P.Brass waste, M.I.Fisher union 32mm dia.,15mm dia 2260.14 NO.

Hundred Sixty and

piller tap, capstan head, screw down high pressor with

Paise Fourteen Only

screws, and back nuts, C.P.Brass stop tap, and plastic

connection P.V.C.Waste pipe, Rubber Plug etc.

Providing and fixing 600mm x 450mm bevelled edge Rupees Eight

Mirror of superior glass mounted on 6mm thick A.C.sheet Hundred Fifty Nine

107 16.00 or plywood sheet and fixed to wooden plugs with C.P. brass 859.41 NO.

and Paise Forty

screws and washers etc.complete. One Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing & fixing C.P. Brass towel rails complete with C.P. Rupees Six

brass brackets fixed to wooden plugs with C.P. brass Hundred Sixteen

108 17.00 screws (B) 600 mm x 20 mm size 616.42 NO.

and Paise Forty

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or Hundred Eighty Six

hinged grating including the cost of cutting and making and Paise Twenty

good the walls. Seven Only

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the following Rupees Two

outside Dia. Low densidy, complete with special falnge Hundred Eighty

compression type fittings, wall clipsetc. including making and Paise Twenty

good the wall ceiling and floor.(F) 75mm Three Only

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

Hundred Seventy

111 270.00 on wall using of PVC clamp of the size 110 mm diametre x 876.90 RMT.

149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

112 90.00 on wall using of PVC clamp of the size 160 mm diametre x 834.38 RMT

210 mm length x 196 mm heigh at every 2000 mm center

Thirty Eight Only

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing and fixing P V C SWR pipes (IS 13592) (Type "A") Rupees Three

spigot and socket soil waste and ventilating pipe for rain Hundred Seventy

113 246.00 water of the following nominal size 110 mm dia 376.61 RMT

Six and Paise Sixty

Providing and fixing S.W. gully trap with C.I. grating brick Rupees One

masonry chamber and water tight C.I. cover with frame of Thousand Two

114 14.00 300mm x 300mm size (inside) with standard weight.(i) 1292.19 Hundred Ninety NO.

Square mouth traps. (A) 100mm x 100mm size P type. Two and Paise

Constructing brick masonary chamber for under ground

C.I. inspection chamber and bends with bricks having

crushing strength not less than 35 Kg/Cm2 in Cement

Mortar 1:5 C.I.Cover with frame (Light dury) 450 MM x

MM internal dimensions, total weight of cover with frame Rupees Two

tobe not less than 38 kgs. (weight of cover 23 kgs. and Wt.

of frame 15kgs/ ) R.C.C.top slab with 1:2:4 mix (1-Cement :

115 15.00 2932.93 Hundred Thirty NO.

2-Coarse sand : 4-Graded stone aggregate 20MM size)

foundation concrete 1:5:10 inside plaster 15MM thick with

cement Mortar 1:3 finished smooth with a floating coat of Ninety Three Only

neat cement on wall and bed concrete etc. complete.In side

dimensions, 455mmx 610mm and 450 mm deep for single

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Extra over items 81 for every additional depth of 0.1M. of Rupees Two

part thereof beyond 450mm depth for Brick masonry Hundred Forty Two

116 45.00 chamber.(i) for 455mm x 610mm size. 242.39 NO.

and Paise Thirty

Constructing brick masonry chamber for underground

C.I.Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less Rupees Three

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

117 16.00 3660.76 Hundred Sixty and NO.

:4-graded stone aggregate 20mm size)foundation concrete

Paise Seventy Six

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on Only

walls and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one

Extra over items 83for every additional depth of 0.1M. of Rupees Two

part thereof beyond 450mm depth for Brick masonry Hundred Sixty Four

118 48.00 chamber.(i) for 500mm x 700mm size. 264.86 NO.

and Paise Eighty Six

Providing, laying and jointing in true line and level U.P.V.C.

Pipe (SCH-40) including fitting of PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall with the Rupees Seventy

119 421.00 help of clamp at every two meter c/c or shall be concealed 72.65 Two and Paise Sixty RMT

as directed including necessary fittings etc. including Five Only

testing of pipe and joints and fixing the same with adhesive

solvent and including cost of all materials. (A) 15mm dia

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall

Rupees Ninety One

be fixed on the wall with the help of clamp at every two

120 422.00 91.84 and Paise Eighty RMT

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials. (B) 25mm dia

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall Rupees One

be fixed on the wall with the help of clamp at every two Hundred Forty

metre C/C or shall be concelled as directed including Eight and Paise

necessary fittings etc. including testing of pipe and joints Twelve Only

and fixing the same with adhesive solvent, including cost

of all materials. (c) 40mm dia

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall Rupees One

be fixed on the wall with the help of clamp at every two Hundred Ninety

metre C/C or shall be concelled as directed including Five and Paise Sixty

necessary fittings etc. including testing of pipe and joints Seven Only

and fixing the same with adhesive solvent, including cost

of all materials. (d) 50mm dia

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having national sanitation Rupees One

foundation seal for potable water of following dia. Nominal Hundred Seventy

bore tube fitting and clamps including making good the and Paise Thirty Six

wall, ceiling and floor etc. complete. : 15 mm dia. Only

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having national sanitation Rupees Two

foundation seal for potable water of following dia. Nominal Hundred Fifty

bore tube fitting and clamps including making good the Three and Paise

wall, ceiling and floor etc. complete. : 25 mm dia. Eighty Two Only

Providing and fixing sink with C.I. or M.S. brackets, painted Rupees Two

white including cutting holes in walls and making good the Thousand Three

125 16.00 same but excluding fittings. (C) Vitreous China Sink.(i) 2326.66 Hundred Twenty NO.

600mm x 450mm x 150mm size Six and Paise Sixty

Providing and fixing screw down bib taps of following size Rupees One

[A] Brass chromium plated screw down bib tap [i]15mm Hundred Eighty Six

and Paise Eighty

Providing and fixing gun metal check or non return wheel Rupees One

valve B 15 mm dia Hundred Eighty Six

and Paise Eighty

Providing and fixing gun metal check or non return wheel Rupees Four

valve B 25 mm dia Hundred Twenty

and Paise Sixty

Providing and fixing gun metal check or non return wheel Rupees Six

valve (B) 40 mm dia Hundred Sixty

Three and Paise

Forty Three Only

Providing and fixing ball cock of aproved quality as Rupees One

directed (A) copper metal 25 mm Dia Hundred Thirty

Eighty Nine Only

Providing laying (to level or slopes) and jointing reinforced Rupees Two

concrete Light duty non-pressure pipes I.S. class NP2 of the

131 175.00 following internal diameter with collars and butt ends 257.19 RMT

Seven and Paise

prepared for collar joints including testing of joints

complete.(D) 150mm

Providing laying (to level or slopes) and jointing reinforced Rupees Six

concrete Light duty non-pressure pipes I.S. class NP2 of the

Hundred Seventy

132 200.00 following internal diameter with collars and butt ends 678.02 RMT

Eight and Paise

prepared for collar joints including testing of joints

complete.(D) 300mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends Thousand Seventy

prepared for collar joints including testing of joints Seven and Paise

complete.(D) 450mm Fifteen Only

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia. Hundred Sixty

Three and Paise

Seventy Seven Only

Providing erecting and fixing double coated Syntex PVC.

Rupees Three and

(ISI) water tank of requiredcapacity each withall necessary

135 11000.00 3.95 Paise Ninety Five Litrs

fittings andconnection etc. complete on terrace.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having national sanitation Rupees One

foundation seal for potable water of following dia. Nominal Hundred Seventy

bore tube fitting and clamps including making good the and Paise Thirty Six

wall, ceiling and floor etc. complete. : 15 mm dia. Only

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having national sanitation Rupees Two

foundation seal for potable water of following dia. Nominal Hundred Fifty

bore tube fitting and clamps including making good the Three and Paise

wall, ceiling and floor etc. complete. : 25 mm dia. Eighty Two Only

Providing and Fixing in position cowl vent to pipe (B)

Seven and Paise

Seventy Four Only

Providing and Fixing in position cowl vent to pipe (C)

Hundred Seventy

Seven and Paise

Twenty Three Only

Providing and fixing pre- cast concrete kerb stone of gray

cement based concrete block 30 cm length, 30 cm height Rupees Three

and 15cm thick of 250 grade concret as per approved Hundred Seventy

design and including excavation for fixing in proper line Four and Paise

and level, fillig the joint with C: M 1:3 ( 1 Cement : 3 Fine Ninety Two Only

Sand) etc. complete

Providing, laying, spreading and consolidation graded

stone aggregate to wet mix macadam 150mm compacted

thick as per MORT & H specifications including premixing Rupees One

the material with water at OMC in mechanical plant Thousand Six

141 1295.00 carriage of mixed material by tippers to site, laying in 1650.34 Hundred Fifty and Cumt.

uniform layers with paver in sub base/ base course on well Paise Thirty Four

prepared surface and compacting with vibratory roller to Only

achieve the desired density

Providing & laying of specified compacted thickness

Granular sub base (GSB) in specified grading in table 400-

1 of the specification MORT&H and compactor to the

required density with 8 - 10 tonne vibratory roller with

plain drum or heavy pneumatic tyred roller of minimum

200 to 300 KN weight in all seasons as per MORT&H , Rupees One

maintaining the required slope & grade during the Thousand One

142 1295.00 operation as approved by the engineer in charge & 1189.78 Hundred Eighty Cumt.

watering to the proper moisture content and sprinkled Nine and Paise

with the help of truck mounted water tank fitted with Seventy Eight Only

suitable arrangement .( fully saturated having CBR value

greater or equal to 30) compacted thickness of 150 mm

consisting of Machine crust stone aggregate as per grading

1 in table 400-1 of the specification M

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and Rupees Seven

as per approved design Confirming to IS 15658 : 2006 Hundred Six and

including 35 mm Sand layer for levelling and filling the Paise Ninety Three

joint with sand in proper line and level as per guidlines of Only

IRC : SP 63-2018 etc. Complete.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and Laying trimix Controlled cement concrete M-

250 finishing smooth with curing etc. complete including

the cost of formwork but exculding the cost of Rupees Five

reinforcement for internal road having thickness of 15 Thousand Four

144 757.00 CM.compaction and finishing of road by trimix process 5486.26 Hundred Eighty Six Cu.Mt.

surface by using vaccum dewatering, floater surface and Paise Twenty

vibrator etc.Rate are also inclusive of Providing and Mixing Six Only

Plastisizer of approved make.

Dry Lean Cement Concrete Sub- base (Construction of dry

lean cement concrete Sub- base over a prepared sub-grade

with coarse and fine aggregate conforming to IS: 383, the

size of coarse aggregate not exceeding 25 mm, aggregate

cement ratio not to exceed 15:1, aggregate gradation after

blending to be as per table 600- 1, cement content not to be

145 597.00 less than 150 kg/ cum, optimum moisture content to be 2204.60 Cu.Mt.

Hundred Four and

determined during trial length construction, concrete

Paise Sixty Only

strength not to be less than 10 Mpa at 7 days, mixed in a

batching plant, transported to site, laid with a paver with

electronic sensor, compacting with 8-10 tonnes vibratory

roller, finishing and curing.)

Cement Concrete Pavement: Providing and Laying of un-

reinforced, dowel jointed, M40 pavement cement concrete

pavement over a prepared sub base with 53 grade cement

with coarse and fine aggregate conforming to IS

maximum size of coarse aggregate not exceeding 25 mm,

mixed in a batching and mixing plant as per approved mix Rupees Seven

design, transported to site, laid with a fixed form or slip Thousand Two

146 766.00 form paver, spread, compacted and finished in a 7204.33 Hundred Four and Cu.Mt.

continuous operation including provision of contraction, Paise Thirty Three

expansion, construction and longitudinal joints, joint filler, Only

separation membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rod, admixtures as

approved, curing Compound, finishing to lines.

Providing and fixing G.I. Rain water spout of 50mm dia. and Rupees One

30cm. length. Hundred One and

Paise Ninety One

Providing and fixing C.I. Manhole cover 0.60 M.x0.45M. size Rupees Nine

having weight not less than 35Kg. Hundred Fifty Eight

Providing and fixing C.I. Steps of approved quality & Rupees Two

500x150x22.5 mm size as per detailed drawing & design Hundred Seven

149 90.00 including applying 2 coats of anti corrosive paint 207.66 NO.

and Paise Sixty Six

etc.complete as directed. Only

Drilling of bore hole in Alluvial Strata by Direct Rotary Rupees Nine

rig.(i) 250 / 300 mm dia bore hole(BORE WELL) Hundred Seventy

Two and Paise Sixty

Supplying, assembling, lowering and fixing in vertical

position in bore well, ERW (Electric Resistance Welded) FE

410 mild steel screwed and socketed/plain ended casing

pipes of required dia, conforming to IS: 4270, of reputed &

approved make, including painted with outside surface Rupees Two

with two coats of anticorrosive paint of approved brand Thousand Four

151 180.00 and manufacture, including required hire & labour charges, 2442.75 Hundred Forty Two Rmt

fittings & accessories, all complete, for all depths, as per and Paise Seventy

direction of Engineer-in-charge.200 mm nominal size dia Five Only

having minimum wall thickness 5.40 mm

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and supplying following materials for

borewellClamps made from M.S. plate with 3 holes on Rupees Two

either side with nuts & bots of standard make and suitable

Thousand Thirty

Seven and Paise

(g) 900 mm X100 mm X 16 mm flat suitable to

Ninety One Only

Bore plug having 100 mm height made from M.S.plate with

3 holes at equal distance on circumference for nut-bolts Rupees Seven

type, locking arrangement with nuts-bolts & lock nuts of

153 5.00 standard make etc. complete. 782.57 No.

Two and Paise Fifty

[b] From 5 mm thick M.S. plate ( For Top also )

ii) Suitable for 200 mm dia pipe

M.S. Bail plug having length 0.45 mtr. from medium class

pipe as per I.S.S suitable for

154 5.00 d) 200 mm dia pipe 851.04 Hundred Fifty One No.

and Paise Four Only

Cement grout seal The grout shall be 1:1. The largest size Rupees Thirteen

aggregate allowed is 10 mm pebbles. The grout will have to

be in placed in such a way that the cement sand and

155 5.00 13405.73 Hundred Five and Job

aggregate will not be separated due to water. Any method

of doing so will have to be approved by the architects/

Engineer. Three Only

Bottom sealing of bore hole as per standard procedure Rupees Six

156 5.00 6727.61 Hundred Twenty Job

Seven and Paise

Gravel packing:Gravel packing shall be done slowly and

sounding of gravel will have to be taken, after putting in

every Thousand Forty

Twenty Nine Only

Lowering and removing of 100 mm dia dropline and

mm dia airline for development of each water bearing

zones come across upto full depth of deep tubewell of size Rupees Twenty

200 mm / 250 mm / 300 mm dia for tubewell having depth Eight Thousand

158 5.00 100 mtr. and above through suitable air compressor. The 28054.77 Fifty Four and Job

job is for complete period of development of tubewell. Paise Seventy

( Without charges for air compressor.) Seven Only

Charges for suppying, hiring Air compressor including all

associated necessary expenditure.

1) 1) 600 CFM / 150 PSI compressor

159 62.00 22427.05 Four Hundred LS

Twenty Seven and

Paise Five Only

Pumping test of the tubewell by submersible pump of Rupees Twenty

adequate capacity in all districts. Nine Thousand

B) D.R. Bore pump test with D.G. Set. Four Hundred

Twenty Five and

Paise Thirty Four

Welding in all positions with required number runs, for M.S

/E.R.W. pipes internally including gauging wherever

necessary, fixing appurtances and other accessories in

connection with pipe laying work as per specification

161 77.00 505.00 Hundred Five and Rmt,

Butt Joints : Plate thickness

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Heavy duty , MS /GI column pipe both end threaded having

length approximate 3 mt. confirming to IS 1239 (Part-1)

with coupling at one end and threaded protector at other Rupees Five

Hundred Forty Two

and Paise Thirty

Supplying and erecting and commissioning 3 Phase

Borewell Submersible Pump Set capable of discharging

135lit / minute against a total head of 120 M driven by Rupees Twenty

electrical motor as specified after reaching exact depth of

bore with tools, lubricator etc. comp.as directed (Electric

163 2.00 21990.73 Nine Hundred No.

motor driven borewell submersible pump set confirming to

Ninety and Paise

IS 8034 and motor confirming to IS 9283 working at

phase 400 / 440 volt 50 Hz AC supply & 2900 RPM.) Seventy Three Only

Providing and constructing B.B. masonry in C.M. 1: 6 (

Cement, 6 coarse sand ) and cement concrete 1: 2: 4 (

Cement, 2 sand, 4 graded stone agg. Of 20 mm nominal size

B.T. kapachi )SEPTIC TANK of 3 M X 0.9 M X 1.5 M internal

dimension with necessary compartment of grit chamber

and septic tank with necessary inlet and outlet connection

with cement plaster ( 15 mm thick ) in C.M. 1: 4 (1 cement, Rupees Thirty Nine

4 sand) with water proofing materials 1: 5: 10 ( 1 Cement, Thousand One

164 2.00 5 Sand, 10Brick bats aggregate 40 mm nominal size ) brick 39104.25 Hundred Four and No.

bats concrete bedding R.C.C.1:2:4 top cover slab 12 cm. Paise Twenty Five

thick with C.I. Cover of 60cm. X 45 cm. size (light duty ) 75 Only

mm. dia PVC SWR ventilating pipe 2 mtr. Long with cowl

vent, 40 mm thick I.P.S. flooring 10 cm. thick cement vata

mild steel for slab and finishing to exposed faces in C.M. 1:3

( 1 Cement, 3 Sand ) curing etc comp. as directed by E.I.C.

Providing and construction SOAK WELL OF 2.50 M. dia. &

5.00 M. depth clear dimension incl. B. K. masonry solid and

honey comb masonry in C.M. 1:6 ( 1 cement, 6 sand ),

R.C.C.1:2:4 ( 1 cement, 2 sand, 4 graded stone agg. 20 mm Rupees Fifty

nominal size of B.T. kapachi ) top slab thick with C.I.

manhole cover 60 cm. X 45 cm. size ( medium )75 mm C.I.

165 2.00 50765.21 Hundred Sixty Five No.

ventilating pipe 2 M. long with 75 mm dia. Cowl vent and

and Paise Twenty

incl. filling brick bats of required size and depth incl. cost

of reinforcement excavation refilling finished top of slab One Only

with C.M. 1:3 ( 1 Cement, 3 sand ) curing etc. comp. as

directed by E.I.C.

Providing and fixing G.I. chain link fabric fencing of

required width in mesh size 50x50 mm including Rupees One

strengthening with 2 mm dia wire or nuts, bolts and Thousand Twenty

washers as required complete as per the direction of Seven and Paise

Engineer-in-charge. Ninety Eight Only

Made of G.I. wire of dia 4 mm

Providing and laying and fixing 50mm thick expansion Rupees One

joint by hydro cell semi rigid UV resistance with high Thousand Four

167 19.00 performance laminated closed cell polythene foam joint 1491.03 Hundred Ninety Sqmt.

filler in sheet foam as directed, etc. complete. One and Paise

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing hot dip Concertina Coil of 610 mm. dia

made out of 2.59 mm. (12SWG) hot dip galvanized ( G.I.

coating not less than 200 gm / s.m. )th. Wire having 80 nos.

of spies and 200 nos. of clips made out of stainless steel Rupees Two

(AISI 304) 1.5 mm thick. Dia, G.I. Strips 0.5 mm. ht. (G.I

168 551.00 coating not less than 120 gm / s.m. ) weight of one coil 233.31 Sq.Mt.

Three and Paise

should not be less than 15 kg etc. complete, at the top of

Thirty One Only

compound wall fixed with S.S clips and binding wires

wherever necessary etc. complete. (Note : Stretching lenght

of one coil should not be more than 9 m.)

Providing and fixing factory made precast RCC perforated

drain covers, having concrete of strength not less than M-

25, of size 1000x450x50 mm, reinforced with 8 mm dia Rupees One

four no longitudinal & 9 nos cross sectional T.M.T. hoop Thousand Three

169 3.00 bars, including providing 50 mm dia perforations @ 100 to 1399.95 Hundred Ninety NO

125 mm c/c, including providing edge binding with M.S. Nine and Paise

flats of size 50 mm x 1.6 mm complete, all as per direction Ninety Five Only

of Engineer-in-charge.

Supplying & filling FINE sand in Filter Beds for preparation

of filter bed upto average 5.0 mt depth below surrounding

average ground level including cost of sand, transportation

for all leads,loading unloading, spereading in layers as

specified below. Loose thickness at all depths dressing and Rupees Two

levelling dewatering sub soil or rain water if any etc. Hundred Seventy

complete. and Paise Fifty One

[ The uniformity coefficient of sand Only

shell be 1.2 to 1.8 ]

a. Fine sand of size 0.35 to 0.55 mm in a layer of 1000 mm

Supplying of crushed stone aggregates, chippings etc. of

hard stone of following nominal size free of disintegrated

pieces deletarious and oraganic mater (for Bitumen surface Rupees Two

dressing etc.) and grading as per I.R.C. Code.(vii) 6mm Hundred Eighty

a layer of 150 mm thick Seven and Paise

Eighty Five Only

Supplying of crushed stone aggregates, chippings etc. of Rupees Five

hard stone of following nominal size free of disintegrated

172 2.00 pieces deletarious and oraganic mater (for Bitumen surface 557.82 Cmt.

Seven and Paise

dressing etc.) and grading as per I.R.C. Code.(iv) 20mm in a

Eighty Two Only

layer of 200 mm thick

Supplying of crushed stone aggregates, chippings etc. of Rupees Four

hard stone of following nominal size free of disintegrated

173 2.00 pieces deletarious and oraganic mater (for Bitumen surface 482.08 CMT

dressing etc.) and grading as per I.R.C. Code.(ii) 40mm in a

layer of 200 mm thick

Supplying of crushed stone aggregates, chippings etc. of

hard Rupees Four

stone of following nominal size free of disintegrated pieces Hundred Forty Two

deletarious and oraganic mater (for Bitumen surface and Paise Seventy

dressing etc.) and grading as per I.R.C. Code.(i) 50mm in a Nine Only

layer of 250 mm thick

Spreading the stone aggregate including filling the Rupees Two

interstices to required camber and gradient (excluding Hundred Sixty Two

175 4.00 spreading of Blindage)(iv) Chipping varying from 6mm to 262.24 CMT

and Paise Twenty

25mm size Four Only

Spreading the stone aggregate including filling the Rupees Two

interstices to required camber and gradient (excluding Hundred Sixty Two

176 4.00 spreading of Blindage))(iii) 25mm to 50mm size crushed 262.24 CMT

and Paise Twenty

stone Four Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Supplying, filling, spreading & leveling stone boulders of

size range 5 cm to 20 cm, in recharge pit, in the required

thickness, for all leads & lifts, all complete as per direction Thousand Five

of Engineer-incharge Hundred Nine and

Paise Eighty Only

Excavation for pipeline trenches including all safety

provisions using site rails and stacking excavated stuff upto

Rupees Eighty Nine

lead of 90 meter cleaning the site etc.complete for lifts and

178 382.00 89.89 and Paise Eighty CMT

strata as specified.

In all Sorts of Soil and soft murram

Upto Depth 1.5 meter

Providing sand or murram bedding or sand filling around Rupees One

the pipe incl. ramming, watering, consolidating etc. Hundred Seventy

179 34.00 complete. G) Sand 15-50 km 177.76 CMT

Seven and Paise

Seventy Six Only

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes for suitable for potable water with

ringfit joint including cost of ring ,as per IS specification no

4985/1988 including all local and central Rupees Seven

taxes,transportation,freight,charges,octroi,inspection Hundred Sixty Six

charges ,loading ,unloading , conveyance to the and Paise Fifty

departmental stores and including cost of jointing material Nine Only

etc.complete. - 160 mm Dia PVC pipe

Test pressure 8 Kg/cm

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes for suitable for potable water with

ringfit joint including cost of ring ,as per IS specification no Rupees One

4985/1988 including all local and central

taxes,transportation,freight,charges,octroi,inspection

181 350.00 1863.45 Hundred Sixty Rmt.

charges ,loading ,unloading , conveyance to the

Three and Paise

departmental stores and including cost of jointing material

etc.complete. - 250 mm Dia PVC pipe Forty Five Only

Test pressure 8 Kg/cm

Lowering,laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

from stores to site of works including cost of

182 230.00 28.28 Eight and Paise Rmt.

labour,material ,except cement solvent,giving satisfactory

Twenty Eight Only

hydraulic testing as per ISI Code. 160 mm Dia PVC pipe

Lowering,laying and jointing PVC pipes and specials of

following class and diameter including cost of conveyance

Rupees Fifty One

from stores to site of works including cost of

183 350.00 51.51 and Paise Fifty One Rmt.

labour,material ,except cement solvent,giving satisfactory

hydraulic testing as per ISI Code. 250 mm Dia PVC pipe

Refilling of pipeline trenches including ramming Rupees Twenty

184 317.00 watering,consolidating desposal of surplus stuff as directed 22.22 Two and Paise Cmt.

within a radius of 3 Km. Twenty Two Only

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35 kg Cm2 in CM. 1 : 5 CI cover with

frame (Light duty ) 455mm X 610mm internal dimension

total weight of cover with frame to be not less than 38 Kg Rupees Two

(Wt of cover 23 Kg) and wt of frame15 Kg)(RCC top slab

with 1 : 2 : 4 mix (1-Cement : 2-Coarse sand :4-graded

185 23.00 2932.93 Hundred Thirty No.

stone aggregate 20 mm nominal size) foundation concrete

1 : 5 : 10 inside plaster 15 mm thick with cement mortar 1 :

3 finished smooth with a floating coat of neat cement on Ninety Three Only

walls and bed concrete etc. Complete.

Inside dimension 455 X 610 mm and 450 mm deep for

single pipe line.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Coursed rubble masonry with hard stone of approved Rupees Three

quality in foundations and plinth in Cement Mortar 1:6 (1 Thousand Four

186 218.00 Cement : 6-coarse sand) etc. complete 3476.26 Hundred Seventy CMT.

Twenty Six Only

Steel work welded in built up sections,frame work

including cutting, hoisting, fixing in position and applying Rupees Nine

apriming coat of red lead paint :- Thousand Five

187 328.59 (A) In beams and joists channels angles, tees, flats with 9528.34 Hundred Twenty Qtl.

connection plats or angle cleats as in main and cross beams, Eight and Paise

hip and trussed purlins connected to common raffers and Thirty Four Only

Providing and Fixing Pre-cast R.C.C. Drain Cover Using Rupees One

controlled cement concrete work M250 and curing Thousand Nine

188 60.00 complete including the cost of form work and including the 1976.57 Hundred Seventy No.

cost of reinforcement - (1.50 x 0.60 x 0.20m) Six and Paise Fifty

GYPSUM CEILING Supplying and Fixing of Suspended ceiling system

components which includes Single Layer Boarding with 12.5mm

thick USG Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange of

20mm and another flange of 30mm and a web of 28mm) screw

fixed to brick wall/partition with the help of approved screws at

600mm centers. Then suspending of USG Boral Thundersteel

Intermediate channel (45mm x 0.90mm thick with two flanges of

15mm each) from the soffit at 1220mm centers with of USG Boral

Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC

Slab with of USG Boral Soffit Cleat (37x27x25x1.6mm thick) and

8mm dia 40mm long Anchor Fastener @ 600mm Centers,

respectively. USG Boral Thundersteel Ceiling Section (having web of

51 mm and two flanges of 27mm each) are then fixed to the of USG Rupees Eight

Boral Thundersteel Intermediate channel with the help of Hundred Twelve

189 47.50 connecting clip (2.6mm Dia) and in perpendicular direction to the 812.35 SqM

and Paise Thirty

USG Boral Thundersteel intermediate channel at 457mm centers. Five Only

USG Boral Thundersteel profiles are rolled with AZ Steel (150 GSM &

310 MPa Yield Strength) having base metal conforming to IS

513:2016 as per IS 15961:2017/ AS 1397:2001).12.5mm thick USG

Boral Standard Plasterboards (confirming to IS 2095 Part 1) is screw

fixed with 25mm long Drywall screws at 230 mm centers. The screw

fixing of gypsum boards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers.All the Gypsum

boards must be staggered. All joints to be taped & finished with

USGBORAL Paper tape & All-Purpose Joint Compound confirming to

ASTM C475. Material certificate to be provided by company. and

approved surface design in suspended grid with all material, making

of coves for indirect lighting ,grooves,cutting and labour,scaffolding,

and as per instruction of engineer and as per detailed drawing &

ABOVEas CEILING

directed by the Architect

PARTITION and as approved

Providing by the

and fixing ofEngineer

ceiling partitions (AS PER DRAWINGS) using 75 mm x 50 mm x Rupees Two

1 mm aluminium pipe for framing,with ghana wood infill etc. Thousand Four

190 26.60 including all hardware item, with all material, labour, 2457.37 Hundred Fifty SqM

lead,scaffolding and wastage etc. and complete the work Seven and Paise

satisfactorily as per instruction of architect or Engineer-in Thirty Six Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

WOODEN PARTITION Providing and fixing of full height solid

sandwitch partitions (AS PER DRAWINGS) using 50 x 50 mm

aluminium pipe for framing (minimum grid size of 600 mmx

600mm), 12mm ply (both sides)of brand greenply ecotech

mr,century sainik mr,archiply etc, teak wood beading patti

etc. making of rebates and including all hardware items,

groove (if shown) with 50 MM TK , glass wool 24 kg density

191 85.77 3753.66 Hundred Fifty SqM

insulation if required ,with all materials,hardwares,ss or

Three and Paise

powdercoated screws, labour, lead and wastage,scaffolding

Sixty Five Only

etc. complete. And Finished with different materials,and

complete the work satisfactorily as per instruction of architect

or Engineer-in charge.

SOLID DOOR FOR WOODEN PARTITION WITH LAMINATE

FINISH (50 MM TK ) Providing and fixing of 50 mm solid doors

(AS PER DRAWINGS) using 200 x 25 mm aluminium pipe for

framing, 12mm ply on front side and 8 mm ply on back side of

brand greenply ecotech mr,century sainik mr,archiply etc,

mm teak wood beading patti at the perifery and framing etc.

with 1 mm laminate on both side with 3x3 mm groove as per

given detail including groove filling and making of rebates

and including all hardware items,mortise door lock (ENOX

192 15.95 11814.57 Hundred Fourteen SqM

EMH-SS-019) with entire set including cylinder,heavy duty

and Paise Fifty Six

conceal door closer of brand enox ( ENOX ITS-3870-EN 2-

5),ozone,dorma,and groove (if shown) and ghana wood in

border and infill with all materials, labour, lead and

wastage,polish work as per instructions etc. complete. And

Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in

MDF FINISH WITH LAMINATE FINISH Providing and fitting

MM MDF of 1 mm laminate (as per drawing & selection) of

brand greenlam,merinolam,century etc on ply partition with

25 mm x 20 mm teakwood beading patti design on top as per

drawing,and 3mm x 3mm bar code pattern grooves if shown,

all material, adhesives,polish work in groove ,labour and

193 188.69 1899.03 Hundred Ninety SqM

hardware, waste of materials,polish work as per instructions,

Nine and Paise Two

complete as per instruction of architect.[Basic Rate of

Laminate : 2400rs./sheet (8' x 4')] and complete the work

satisfactorily as per instruction of architect or Engineer-in

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

ACOUSTICAL PANEL FINISH Providing and fitting of acoustic

panels with Standard size & thickness of 1220*2420*9mm.of

brand Artois,KANUF ARMSTRONG,ecotone,trnaquil ,only.IN

GRADIENT PATTERN,including synth pf of 24kg density,Panels

should have Sound Absorption coefficient (NRC) 0.84.

Formaldehyde emission standards of GB18580-2001 class E1,

it should be a green material with asbestos-free, non-

toxic and tasteless gas under extreme temperature,

protecting the ozone layer, non-irritant and recyclable.

acoustic panels have to be Fire-resistant as per China

194 48.90 standard class B1. Good insulation properties, to prevent 1609.08 SqM

Hundred Nine and

transmitting the heat from outdoor to indoor directly as

Paise Eight Only

partition or and ceiling, saving 35% of energy, extending the

life of air conditioning.including all acceessories,synth pf,

material,cutting work of approved finishing,adhesives, behind

pannel black out paint work on ply , labour etc. and complete

the work satisfactorily as per instruction of architect or

Engineer-in charge.(Basic rate of PANNEL-100 rs/sq.ft.)

WALL COLOR - SATIN Providing and applying satin paint of

approved quality, company and shade upto finishing (min

coats) including lappi and primer work and all material, labour

195 1.00 including scaffolding etc. and complete the work satisfactorily 343.40 SqM

Three and Paise

as per instruction of architect or Engineer-in charge. (Basic

rate of SATIN paint- 28 rs/sq.ft.)

PLASTIC PAINT Providing and applying plastic paint of

approved quality, company and shade upto finishing (min 3 Rupees Two

coats) including all material, labour including scaffolding etc. Hundred Twenty

and complete the work satisfactorily as per instruction of Four and Paise

architect or Engineer-in charge. (Basic rate of plastic paint- 18 Twenty Two Only

POP PUNNING Providing and fixing of POP Punning and

finished by company approved gypsum, taping, lapi, including

scaffolding etc. and including grooves as shown in drawing Rupees Two

And including satin paint complete with all material, labour Hundred Seventy

with all lead, lift and transport.and complete the work Five and Paise

satisfactorily as per instruction of architect or Engineer-in Seventy Three Only

charge.(Basic rate of POP PUNNING WITH TACHA WORK -

RECEPTION TABLE(INFORMATION DESK) - ENTRANCE LOBBY

Providing and fixing of INFORMATION DESK as per drawings

and instructions provided,using ply of brand greenply ecotech

mr,century sainik mr,archiplyetc,aluminium pipe for framing

and finishing it with italian marble as per selection and

dimonad polish and 1 mm unicore laminate of brand Rupees Fifty Three

greenlam or selected by the architect(basic rate of unicore Thousand Sixty

laminate is 3000 per sheet of size 8'0 x 4'0)including all Five and Paise

material,ms fabrication work ,glass work, installation, labour Thirty Eight Only

and hardware, polish work as per instructions,waste of

materials etc and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

"L" TYPE TABLE (2.40 X 0.90) Providing and fixing of L-TYPE

office table of size 2.40 x 0.90 mt and side storage with

drawers and shutters of width 0.60 mt as per

drawings,modesty pannel, and instructions provided,using ply

of brand greenply ecotech mr,century sainik mr,archiply

etc,or aluminium pipe for framing and finishing it with 1 mm

unicore laminate and 1mm laminate of brand greenlam or

selected by the architect(basic rate of unicore laminate is

Rupees Thirty Five

3000 per sheet and other 1mm laminate is 2000 per sheet, of

199 2.00 size 8'0 x 4'0)including all material, installation, m.s 35350.00 NO

Hundred Fifty and

fabrication work with powder coating,labour and

hardware,drawer channels ,nylon leveler foot

rubber,hinges,handles,keyboard trolley,cpu trolley,cable

manager,cable trunking system etc, polish work as per

instructions ,waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

"L" TYPE TABLE (1.80 mt X 0.68 mt ) Providing and fixing of L-

TYPE office table of size 1.80 x 0.68 mt and side storage with

drawers and shutters of width 0.60 mt as per

drawings,modesty pannel, and instructions provided,using ply

of brand greenply ecotech mr,century sainik mr,archiply

etc,or aluminium pipe for framing and finishing it with 1 mm

unicore laminate and 1mm laminate of brand greenlam or

selected by the architect(basic rate of unicore laminate is

3000 per sheet and other 1mm laminate is 2000 per sheet, of Rupees Twenty

size 8'0 x 4'0)including all material, installation, m.s Five Thousand Two

fabrication work with powder coating with powder Hundred Fifty and

foot rubber,hinges,handles,keyboard trolley,cpu trolley,cable

manager,cable trunking system etc,, waste of materials,polish

work as per instructions etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

SINGLE BAY TABLE (1.25 X 0.68) Providing and fixing of single

bay office table of size 1.25 x 0.68 mt and side storage with

drawers and shutters of width 0.45 mt as per

drawings,modesty pannel and instructions provided,using ply

of brand greenply ecotech mr,century sainik mr,srg etc,or

aluminium pipe for framing and finishing it with 1 mm unicore

laminate and 1mm laminate of brand greenlam or selected by

the architect(basic rate of unicore laminate is 3000 per sheet Rupees Fifteen

and other 1mm laminate is 2000 per sheet, of size 8'0 x Thousand One

4'0)including all material, installation,m.s fabrication work Hundred Fifty and

channels,hinges,handles,keyboard trolley,cpu trolley,cable

manager,cable trunking system etc waste of materials,polish

work as per instructions etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

STORAGE UNIT WITH LAMINATE FINISH Providing and Making

of Storages (AS PER DRAWINGS) using ply of brand of brand

greenply ecotech mr,century sainik mr,archiply etc,(thickness

as specified)/ sag wood and finished by 1 mm Laminate

outside as per selection of brand

greenlam,merinolam,formica or 6mm HDF as per drawing,

1mm tk laminate (inside),water pu polish (as shown), Rupees Twelve

drawers, shelves,with profile shutter with glass etc. with all Thousand Seven

hardware, nylon leveler foot rubber, handles,hinges, locks , Hundred Fourteen

magnet and other acessories with all material, and Paise Six Only

installation,labour, lead and wastage,polish work as per

instructions etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.(Basic rate of

Inside Laminate : 18 rs./sq.ft. & Outside Laminate :

MEETING ROOM Providing and fixing of MEETING ROOM

table including side storage as per drawings and instructions

provided, using ply of brand greenply ecotech mr, century

sainik mr, archiply etc., aluminium pipe for framing and

finishing it with 12 or 6 MM CORIAN work including all cnc

work of brand granium,Tranquil,dupont ,and 1mm unicore

Rupees One Lakh

laminate and 1mm laminate of brand greenlam or selected by

the architect (basic rate of unicore laminate is 3000 per sheet

203 1.00 and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0) 192327.93 NO

including all material, installation,m.s fabrication work with

Seven and Paise

powder coating, glass work as per design,labour and

Ninety Two Only

hardware, waste of materials,polish work as per instructions

etc. and complete the work satisfactorily as per instruction of

Architect or Engineer-in charge. (APPROX SIZE OF TABLE IS UP

SINGLE BED (36"x78"x18") providing and fixing of Single bed

made out from 40x25x18swg .pipe with 1''x1''x18swg .center

support with powder coated, corner and center support will

hold the 18mm ply . The head board shall hold the weight of

appx. 120kg and properly welded without any visible sign.The

bottom has to have heavy duty bushing with levelers in HD

pvc.All metal has to be in CRC and removing of rust

204 62.00 mechanicaly, passivation, dephosphating, degreas and 10100.00 NO

Hundred and Paise

derusted through special paints which are certified and

passed through seven tank process.All material shall be epoxy

powder coated upto minimum 60 micron. The bottom also

has to be powder coated as per instructed by Engineer-in-

charge/Consultant. Size-36"x78"x18"

SINGLE BED MATTRESS Providing and buying Mattress: using

Material Hybrid mattress combining natural latex, memory

foam,(B) 1950mm x 900mm Size, and high-resiliency (HR)

foam with thickness of 5 to 6 inches contains of various layers

of of 70-density latex foam (top layer),memory foam (middle

layer),HR foam (bottom layer) with cover of Certified organic

cotton with a removable zipper and washable it should also Rupees Five

205 62.00 achieve maximum spinal alignment with approved certificates 5050.00 Thousand Fifty NO

packed for easy and safe delivery with 7 years of

manufacturer warranty other acessories with all material,

installation,labour, lead etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

SINGLE BED SHEET AND PILLOW Providing and buying king

size pillow and bedsheet which is made of cotton with other

fibers (such as polyester or rayon) for durability and

comfort.Providing and Buying king size fitted bed sheet with

pillow covers of 100% cotton in material the thread count Rupees One

206 62.00 should be minimum of 200 tc color and pattern may varies as 1010.00 Thousand Ten and NO

smooth and silky as per instructions etc. and complete the

work satisfactorily as per instruction of architect or Engineer-

SINGLE BED BLANKET Providing and Buying king size blanket

of cotton in material with fabric cover with thread count

should be minimum of 200 tc color and pattern may varies as Rupees One

per selection by architect The fabric is durable and easy to Thousand Five

wash and it has to be washed in washing machine and Hundred Fifteen

or Engineer-in charge.

BED SIDE TABLE Providing and fixing of Side table made out

from top will be 25mm ply wood of brand greenply

ecotech,mr saras,archidply with 1mm SF lamination in

external and 0.7 mm inside of brand greenlam,merinolam, Rupees Three

208 62.00 glued with PUR glue as specifed in specification sheet, with 3030.00 Thousand Thirty NO

shutters of ply as per instructed by Engineer-in-

charge/Consultant. Size-24"x18"x18"

WARDROBE (39"x24"x96") Providing Wardrobe with Shutters

ready to assemble type, made from Flat Laminated Plywood

Panels of 18 mm BWR ply confirming to IS 303 covered brand

greenply ecotech,mr saras,archidply with 1mm SF lamination

in external and 0.7 mm inside of brand greenlam,merinolam, Rupees Twenty

glued with PUR glue as specifed in specification sheet, as Five Thousand Two

specifed in specification sheet,One shelves horizontal to be Hundred Fifty and

shutter. as per instructed by Engineer-in-charge/Consultant.

Size-39"x24"x96"

GANG CHAIR - 2 SEATER Providing and fixing 2-seater gang

sitter with moulded foam, with Aluminium casting and metal

waterfall seats, PU 10mm thick pads on seat & back

(chargeable), P.C. frame & with perforation. as per architects

210 4.00 6060.00 Thousand Sixty NO

selection,and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.BRANDS :

COHUMAN , FEATERLITE , HAYWORTH BASIC RATE 5000 PER

GANG CHAIR - 3 SEATER Providing and fixing 3-seater gang

sitter with moulded foam, with Aluminium casting and metal

waterfall seats, PU 10mm thick pads on seat & back Rupees Ten

(chargeable), P.C. frame & with perforation. as per architects Thousand One

selection,and complete the work satisfactorily as per Hundred and Paise

COHUMAN , FEATERLITE , HAYWORTH BASIC RATE 8500 PER

CORNER TABLE(approx 0.60 X 0.60) Providing and fixing

center or corner table of brand as per architects

selection,with ms base with powder coating and top will be Rupees Four

212 3.00 glass or stone as per selection and complete the work 4040.00 Thousand Forty NO

charge.(basic rate per piece is 3400/-

)COHUMAN,DVARK,STEARLING

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

DINNING TABLE WITH 6 CHAIR Providing and fixing of

DINNING TABLE with 6 chair of size 1.80 X 0.90 MT using

mm nano white stone (basic rate 550 sqft) at top and Rupees Twenty

fabricated base of ms frame with powder coating AS PER Thousand Two

SELECTION WITH 6 plastic CHAIRS with cushioning(BASIC Hundred and Paise

work satisfactorily as per instruction of architect or Engineer-

DINNING TABLE WITH 4 CHAIR Providing and fixing of

DINNING TABLE with 6 chair of size 1.20 X 0.90 MT using

mm nano white stone (basic rate 550 sqft) at top and Rupees Fifteen

fabricated base of ms frame with powder coatingAS PER Thousand One

SELECTION WITH 4 plastic CHAIRS with cushioning (BASIC Hundred Fifty and

work satisfactorily as per instruction of architect or Engineer-

HIGH BACK CHAIR Providing and fixing of high back office

chair, with bifma class IV gas lift. Cruise HB Chair, G.F. Nylon

structure with wire mesh on back high density cushion on

seat, Fixed arms, Centre tilt heavy duty mechanism with 1.2+

mm thick metal plate used in making of metal component.

215 6.00 Pnuematic gaslift for height adjustment, Nylon base with 50 10100.00 NO

Hundred and Paise

mm castors. as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in

charge.Basic rate of chair is 8500 /- per chair. BRANDS :

DVARK, HERMAN MILLER,FEATHERLITE

MID BACK CHAIR Providing and fixing of mid back office chair

of good quality Curved fiber and nylon body with adjustable

lumber support, Reinforced mesh & knee tilting mechanism,

Height adjustable arms, 5 prong nylon base as per selection Rupees Five

216 49.00 and complete the work satisfactorily as per instruction of 5050.00 Thousand Fifty NO

per chair BRANDS : DVARK, AMBER, FEATHERLITE

PEON CHAIR Providing and fixing of peon chair as per Rupees One

selection and complete the work Thousand Three

217 4.00 satisfactorily as per instruction of architect or Engineer-in 1393.80 Hundred Ninety NO

charge.Basic rate of chair is 1200/- per chair Three and Paise

ROLLER CURTAIN Providing and fixing of approved quality

roller blinds using,- Marvel,Ad blinds mac,phifer fabric of

premium grade, with roller tube, bottom bar leveller made

of extruded aluminium alloy an Idler, Insert Type- Brackets,

PVC chain etc. all complete at all floor and heights as per

approved specification. Roller Tube Control, Clutch, Idler Side

by side or single Roller Tube of extruded Aluminium 38mm

inner dia - 41mm outer dia minimum wall thickness of 1.6mm.

Roller blind - roller blind fabric should be made up of 35%

FibreGlass, 65% PVC, it should have specific low emissivity Rupees One

treatment and lead free with Greenguard gold certification. It Thousand One

218 199.80 should have 3% to 5% openness, fabric thickness should be 1108.50 Hundred Eight and SqM

0.43 mm, mesh weight approx 400 gms/ sqmtr. It should cut Paise Forty Nine

UV rays, with antimicrobial properties preferably with Only

Microban. The fabirc should be Flame retardant and Lead

Free. It should be GreenGuard certified with Gold Standard

for low chemical emissions for indoor use. (Basic rate of Roller

blinds- 110rs/sq.ft.)including all accessories, material,

labour,installation etc..and complete the work satisfactorily

as per instruction of architect or Engineer-in charge..

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

BACKLIT LOGO (GDMC LOGO) : Providing and fixing of

BACKLIT LOGO& FULL Name Text (GDMC) in LETTERS size of

300 to 450 mm as per design using 10 mm clear Acrylic cut

work and fixing 3mm acrylic on top of brand Ptglass,astari etc,

4mm Acp of 0.5 mm tk for profiling,as per detail,3M vinyl with

5 years warranty on fading with all laser and cnc Rupees Ten

work,including all material,osral led modules including drivers Thousand One

as required with 5 years warranty , labour,all required m.s Hundred and Paise

hardwares, waste of materials,scaffolding, labour,lead,

transport, and installation, etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

S.S NAME PLATE SMALL Providing and fixing of 2MM TK S.S

316 GRADE matt finish NAME PLATE with cut work and fixing

3mm acrylic on top or behind of brand Ptglass,astari etc,with

all laser and cnc work,and wooden finish back board

,including all material,SCAFFOLDING labour,15 mm ss studs

220 25.00 1010.00 Thousand Ten and NO

for mounting and other hardwares, waste of materials etc and

complete the work satisfactorily as per instruction of architect

or Engineer-in charge.( BASIC SIZE OF NAME PLATE 150 MM X

ACRYLIC & S.S 316 GRADE -SIGNAGES WITH GMC FULL NAME

FONT Providing and fixing of 10 mm clear Acrylic cut or 2mm

tk S.S 316 GRADE work and fixing 3mm acrylic on top of brand

Ptglass,astari etc,with all laser and cnc work,including all

221 1.80 8080.00 Thousand Eighty SqM

material, labour,25 mm ss studs for mounting and other

hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in

METAL RACK Providing and fixing of storage rack of angle

slotted type of size 2000 x 900 x 460 with 6 shelfs(20 swg)

,including all hardware,colours,powder coating, channels,

222 1.00 4040.00 Thousand Forty NO

etc.and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

PAINTING - 24"X24" Providing and fixing of 24" x 24" painting

with fibre frame with good quality digital laser printing paper Rupees Two

should be 200 gsm and pasting on hard board backing hand Thousand Five

223 10.00 painting on canvas as per selection and complete the work 2525.00 Hundred Twenty NO

satisfactorily as per instruction of architect or Engineer-in Five and Paise Zero

charge.Basic rate of painting is 2125/- per painting Only

PLANTER WITH REAL PLANTS Providing and fixing 13 inch dia

planter/pots of frp or plastic including drain tray with real

indoor plants as per selection,including 3 feet ht plants of Rupees Two

224 10.00 brand seasonal dekor or as per selection and complete the 2020.00 Thousand Twenty NO

in charge.(BASIC RATE OF POT IS RS 1000/-)

WALL CLOCK Providing and fixing of 12 to 16 inch dia

wallclocks of brand quartz or as per selection and complete

225 15.00 the work satisfactorily as per instruction of architect or 1212.00 NO

Engineer-in charge.(basic rate of wall clock is rs 1020/-per

INDOOR FLOOR MAT Providing and fixing indoor floor matt of

brand my floor or as per selection and complete the work

226 20.00 satisfactorily as per instruction of architect or Engineer-in 1111.00 NO

charge.(basic size of matt is 1.20 x 0.60 mt)

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

PVC DUSTBIN Providing & Supplying of 8 to 10 in dia and 12 to

15 inc ht P.V.C. Dustbin of rand cello,pigeon etc. complete as

Hundred Fifty Eight

227 25.00 per selection & directed by the Architect and approved by the 858.50 NO

and Paise Fifty

Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 722/- )

MIRROR FINISH(5mm thick Looking Mirror) Providing and

fitting of mirror/glass (as per drawing & approved shade)of Rupees One

brand ais,modiguard,etc on ply panelling / on tile cladding Thousand Nine

228 12.58 including all material, labour and hardware, cutouts, edge 1937.15 Hundred Thirty SqM

polishes,waste of materials and complete the work Seven and Paise

satisfactorily as per instruction of architect or Engineer-in Fourteen Only

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single mounting Rupees Four

base frame covered with textured/metallic/white front plate Hundred Eighty

modules erected on / in wall / ceiling as per pipe erected, Five and Paise

with necessary Lamp holder/ceiling rose / H.D.Connector as Eighty One Only

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC / wooden box Rupees One

covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet Hundred Sixty

for open / concealed wiring. with necessary Lamp holder / Seven and Paise

ceiling rose / H.D.Connector as directed. Sixty Six Only

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in Rupees Five

231 111.00 wall / ceiling as per pipe erected with following type of 510.05 Hundred Ten and Pt.

accessories. Paise Five Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

232 41.00 metallic/white front plate modules erected on / in wall / 257.55 Pt.

Seven and Paise

ceiling with following type accessories

Fifty Five Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

Hundred Forty Five

233 136.00 wall / ceiling as per pipe erected with following type of 745.38 Pt.

and Paise Thirty

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as

234 9.00 1133.22 Hundred Thirty Ea.

1 no. 6A/16A universal plug-switch combined.

Three and Paise

3 nos. 6A Switch

Twenty Two Only

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

Hundred Sixty and

235 7.00 situation directed by Engineer In charge. 160.59 Ea.

Paise Fifty Nine

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in Rupees Eight

wall / ceiling as per pipe erected with following type of Hundred Seventy

accessories. One and Paise Sixty

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire Three Only

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate Rupees One

, modules erected with necessary connections as per site Hundred Sixty and

situation directed by Engineer In charge. Paise Fifty Nine

(4) TV Co-axial Socket outlet Only

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate Rupees One

, modules erected with necessary connections as per site Hundred Sixty and

situation directed by Engineer In charge. Paise Fifty Nine

(8) Computer RJ-45 socket Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base

Hundred Seventy

239 67.00 frame covered with textured/metallic/white front plate 674.68 Pt.

modules erected on / in wall / ceiling as per pipe erected.

Sixty Eight Only

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding,

Power factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD < 10%, Compitible with

electronic regulator unit for Speed Control and all remaining

240 67.00 2629.03 Hundred Twenty Ea.

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current and

overload protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required.[ Make shall be approved by

Engineer in Charge]

(A) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

241 67.00 108.07 Hundred Eight and Mtr.

complete with proper insulation without leakage and earthing.

Paise Seven Only

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and Rupees One

242 67.00 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 108.07 Hundred Eight and Ea.

complete erected concealed in Ceiling with necessary Paise Seven Only

Providing 2.5mm.thick laminated acrylic sheet to cover the Rupees Eighteen

243 67.00 fan hook or Fan box. 18.18 and Paise Eighteen Ea.

Supplying and erecting approved make oscillating type

bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall

mounted with height adjustment and rotary tilting device

244 11.00 2534.09 Hundred Thirty Ea.

complete with guard, flexible Core plug top complete erected

with lead wires as directed.

Supplying & erecting approved make low noise decorative Rupees One

exhaust fan having square frame ABS body with inbuilt lowers Thousand Three

245 19.00 & square frame. 1366.53 Hundred Sixty Six Ea.

250mm with 1350 RPM Cat.II and Paise Fifty

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise Rupees Three

operation suitable for medium duty having following dia size Thousand Three

246 10.00 and maximum speed in RPM 3339.06 Hundred Thirty Ea

[D] 450 mm dia 900 RPM Nine and Paise Six

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

Hundred Seventy

247 63.00 LED driver efficiency > 85 % 373.70 Ea.

Three and Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Two

LED driver efficiency > 85 % Hundred Twenty

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below and Paise Eighteen

description have shown ranges of Wattage capacity of LED Only

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(i) 5-9 watts,Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Four

LED driver efficiency > 85 % Hundred Twenty

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Seven and Paise

description have shown ranges of Wattage capacity of LED Twenty Three Only

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(ii) 11-15 watts, Surge-2 KV

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Seven

LED driver efficiency > 85 % Hundred Fifty Eight

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below and Paise Fifty One

description have shown ranges of Wattage capacity of LED Only

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(iv) 22-24 watts, Surge-2 KV

Supplying and Erecting Of L.E.D. type High bay fixture having

Power Consumption of following watts with, Input Voltage

110 - 290 V.AC with full efficiency, Power Factor > 0.9 with

50/60 HZ, CCVC LED Driver used for maximum power saving, Rupees Five

Best Quality Aluminium alloy housing and aluminium Dome Thousand Two

for better heat dissipation, CCT Cool white (6000K), CRI 80, Hundred Fifty Six

Beam angle > 120 degrees, working temperature -20 deg c to and Paise Four Only

+55 deg c, Body IP

(A) 70 to 90 watts

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

Thousand Eighty

252 20.00 fittings required LM-79 & LM-80 certificates)(NOTE: Below 6088.28 Ea.

Eight and Paise

description have shown ranges of Wattage capacity of LED

Twenty Eight Only

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(iii) Above 60 to 90 watts

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire Rupees Ten

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( Thousand Eight

253 2.00 fittings required LM-79 & LM-80 certificates)(NOTE: Below 10818.11 Hundred Eighteen Ea.

description have shown ranges of Wattage capacity of LED and Paise Eleven

fittings.The Engineer incharge may select any wattage Only

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(vii) above 200 to 250 watts

(b) LED Bollard fittings of minimum height 600 mm & Rupees Three

dia.100mm having polycarbonate clear/milky diffuser Thousand One

254 5.00 mounted on 3mm thick aluminium finished powder coated 3161.30 Hundred Sixty One Ea.

pipe with base plate 160x160mm with erection by M8x75mm and Paise Thirty

fastner with required RCC foundation.IP65 for 9 to 20 watt Only

,surge-4kv- cat-III

Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT

having following specifications :

Rupees Thirty Five

It should have large fully serrated

platform 15” wide 20” deep which locks ladder , Aluminium

255 1.00 35590.38 Hundred Ninety Ea.

feet with thick rubber tread, top rail guard to serve as a

and Paise Thirty

railing, two pairs of gusset support at the bottom step and All

gussets are heavy duty steel. Capacity : 300 lbs.

Making trench in soft soil of suitable width of 90 cm deep for

Rupees Fifty Five

laying cable or locating the fault all over the run and back

256 31.00 55.55 and Paise Fifty Five Mtr.

filling the same and making the surface as normal ground.

Providing & erecting water cooler having storage capacity

Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚C

Rupees Fifty Five

within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit,

257 5.00 55893.40 Hundred Ninety Ea.

water tank surrounded by evaporating, coil, thermostats,

Three and Paise

relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

258 5.00 40 psi inline type post carbon filter auto low & high pressure 29187.99 Ea.

Eighty Seven and

switches with following size of storage tank & LPH capacity &

Paise Ninety Nine

erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

SITC of Digital / PCM / TDM EPABX System having SMT design,

system with flexible universal slots. Inbuilt Auto attendant

facility, Minimum 15 Nos. conference, Analog extension line,

Calling GSM, E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public address Rupees Forty Five

cord, shall have unrestricted simultaneous dialing facility, Thousand Three

259 1.00 QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of 45398.49 Hundred Ninety Ea.

Service, Quick Dial-Single Digit dialing of any two external Eight and Paise

number, Once only ring device, Chairman / Secretary - Do not Forty Nine Only

disturb Facility, Power Down Mode, Hot Line, Hot Outward

Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up

& Call Transfer,

Call transfer while Ringing with Voice Guide System, (DISA),

Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready

Port, External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing, External

Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

[A] No of Extension 16, No of Junctions 6, 8 Port IP Resource

in-built, 4 Port Web base Video Conferencing, No of

expandable ports : 48, Operators Console - 01 Compatible :

Supplying & erecting push button type telephone instrument

having speaker phone Caller ID & hands free dialing system &

Hundred Sixty Five

260 7.00 30 memories with display system Single line [[Approved by 565.60 Ea.

and Paise Sixty

Competent Authority i.e. not Below the rank of Executive

Providing & erecting main Distribution (MDF) indoor type, Rupees Nine

back mounted frame as per DoT standard approved with Hundred Ninety

krone strips Four and Paise

(a) Suitable for 10 pair Eighty Five Only

Supplying and erecting horizontal / vertical mounting type

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff complete Rupees Eight

with heating elements,adjustable thermostats 300C to 850C, Thousand Three

262 2.00 indicating lamp, safety valve, fusible plug, etc.complete 8373.91 Hundred Seventy Ea.

erected with coach bolts, nuts. washers & cementation Three and Paise

(A) 10 Ltr. with 3 KW. heating element Ninety One Only

Premium Category

Supplying and erecting horizontal / vertical mounting type

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff complete Rupees Fifteen

with heating elements,adjustable thermostats 300C to 850C, Thousand One

263 3.00 indicating lamp, safety valve, fusible plug, etc.complete 15195.45 Hundred Ninety Ea.

erected with coach bolts, nuts. washers & cementation Five and Paise

(E)50 Ltr. with 2 KW. heating element Forty Five Only

Premium Category

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made Rupees Thirty Nine

264 40.00 of poly - Aluminium film bonded Al. Braids @ suitable 39.39 and Paise Thirty Mtr.

coverage overall sheathed with black PVC insulation. Nine Only

Supplying & erecting approved make LAN cable of following Rupees Forty

265 330.00 size in existing pipe as per direction 47.47 Seven and Paise Mtr

[C] CAT - 6 Forty Seven Only

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with FRLS

PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size

266 140.00 20.20 and Paise Twenty Mtr.

of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

Supplying, installation, Testing and commissioning offollowing

capacity 24 port Layer 2 indoor NetworkSwitch having

features and specifications etc. asmentioned here under: At

least 24 X RJ-45 GigabitEthernet Ports and additional 2 X 10G

Base -T with 4X SFP Ports with non-blocking architecture by

havingSwitching capacity of min. 168Gbps and

packetforwarding rate of 125Mpps or higher, 16K MAC table.

Console Port, USB port, Stacking support of min. 8units per Rupees One Lakh

stack. Internal dual AC Power supply, STP,RSTP, MSTP, BPDU Seven Thousand

267 1.00 Filter, BPDU Restriction, Min. 9KJumbo Frame, LBD, IGMP 107327.91 Three Hundred Each

Snooping V1/V2/V3, MLDSnopping V1/V2. IGMP /MLD Groups Twenty Seven and

1K or more,IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Paise Ninety Only

Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ,Port

based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN,VLAN Trunking,

DHCP Snopping, Server, serverScreening. RADIUS , TACACS+

Authentication, ǪoS:802.1P, 8 queues per port,

ǪoS : WRR, Strict+WRR,WRED, 802.1p. ACL: MAC based, IPv4C

IPv6,TCP/UDP Port number, time based ACL, TFTP

Client,SNMP V1, v2c, v3, SNMP traps, RMON, DHCPserver,

relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah,

sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV

surge protection on all GigabitEthernet ports and on all GE RJ-

45 access ports. Certifications: UL, CE, FCC, RoHS,

MTCTE,OEM/Product must be on Trusted Telecom Portal of

Department of Telecommunication, Government ofIndia etc.

complete as required.

24 port PoE Layer 2 Network Switch with PoESupport of

370W or higher with each copper portsupporting 802.3at

Supplying and fixing of following size Wall Mount Rack

having Fixed Structure with 0.8mm CRCA Sheet, completely

knocked-down condition (CKD)Shape, Vertical Mounting Rail

1.6 mm with 'U'Marking,Minimum 2 cable entry/exit provision

at Top andbottom with rubber protection, Front 5mm Rupees Seven

ToughenedGlass with lock, wall mounting kit, Powder Thousand Six

268 1.00 coatedColor- RAL- 7035, complied with UL & RoHS, 2 x 7669.15 Hundred Sixty Nine Each

6sockets 16A power distribution units, 3 numbersclosed cable and Paise Fifteen

organizer, Hardware mounting screwspacket of 20 x 1 Only

number, etc. complete as required.

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing approved make Perforated C type cable

tray. Made from sheet steel. The cable tray should be single

or double bended as per required and as per IS 2062/1079

and shall be coated with hot dip galvanizing as per IS Rupees Four

2629/4759. with max 17.5% perforation with coupler plate / Hundred Twenty

Fish plate and GI hardware like nut - bolt and washers etc. Four and Paise

erection with necessary support( included) as per Twenty Only

Specification and as per instruction of engineer in charge..

(3) 150 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable

tray. Made from sheet steel. The cable tray should be single

or double bended as per required and as per IS 2062/1079

and shall be coated with hot dip galvanizing as per IS Rupees Six

2629/4759. with max 17.5% perforation with coupler plate / Hundred Twenty

Fish plate and GI hardware like nut - bolt and washers etc. Two and Paise

erection with necessary support( included) as per Sixteen Only

Specification and as per instruction of engineer in charge..

(5) 300 X 50 X 2.0 mm Thick

Providing and fixing approved make Ladder type cable tray.

Made from M.S sheet. The cable tray should be bended as per

IS 2062/1079 shall be fabricated of double bended channel

section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as per IS and

271 40.00 shall be coated with hot dip galvanizing as per IS 2629/4759. 523.18 Mtr.

Three and Paise

with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

(8) 150 X 100 X 1.6 mm Thick

Providing and fixing approved make Ladder type cable tray.

Made from M.S sheet. The cable tray should be bended as per

IS 2062/1079 shall be fabricated of double bended channel

section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as per IS and

Hundred Fifty Six

272 86.00 shall be coated with hot dip galvanizing as per IS 2629/4759. 556.51 Mtr.

and Paise Fifty One

with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

(10) 300 X 100 X 2.0 mm Thick

Providing and fixing approved make Ladder type cable tray.

Made from M.S sheet. The cable tray should be bended as per

IS 2062/1079 shall be fabricated of double bended channel

section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as per IS and

273 116.00 shall be coated with hot dip galvanizing as per IS 2629/4759. 694.88 Mtr.

with coupler plate / Fish plate and GI hardware like nut - bolt

Eighty Eight Only

and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

(13) 600 X 100 X 2.0 mm Thick

NAME OF WORK : PROPOSED BUS DEPOT AND WORKSHOP AT GANDHIDHAM FOR GANDHIDHAM MUNICIPAL CORPORATION.

Item Total amount

Item Total amount

No. Item of work Unit according to

but may be in figures In Words

Providing and fixing approved make Ladder type cable tray.

Made from M.S sheet. The cable tray should be bended as per

IS 2062/1079 shall be fabricated of double bended channel

section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the

longitudinal members at 250 mm c/c spacing . as per IS and

Hundred Seventy

274 131.00 shall be coated with hot dip galvanizing as per IS 2629/4759. 874.66 Mtr.

with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge..

(16) 900 X 100 X 2.0 mm Thick

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

275 12.00 16392.30 Hundred Ninety Sq.Mtr

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete.