SPL REPAIR TO OR MD ACCN BLDG NO P 97 01 TO 08 OF SATA BTY AND CONSTR OF FOL DUMP WITH APPROACH PATH AT MT AREA UNDER AGE BR I OF GE ARMY BHUJ

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M& L for Type C1 1:3:6 (using 20mm graded aggregates) Pre-cast cement: concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar(1:6) complete all as specified and as directed.

M& L for Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and as directed.

M& L for Rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100mm Cement concrete 1:4:8 type D- 2 (40mm graded aggregate) as in Subbase for flooring complete all as specified and as directed.

M&L for 25 mm Cement concrete 1:2:4 type B- 1 (20mm graded aggregate) as in finishing course flooring finished the surface smooth and even without using extra cement all as specified and as directed.

M& L for Preparing the newly Plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M& L for Preparing the newly Plastered surfaces of wall and applying two coats of cecment base paint paint ,over and including a coat of primer complete all as specified and as directed.

M & L for reinforced Cement Concrete (Nominal mix) 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in foundations including plinth bands,roof bands bases for columns, basement slabs incl necessary formwork complete all as specified and as directed.

M& L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M& L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S & F Powder Coated anodised Aluminium alloy section sliding windows with framesseries -C ( 20 mm) , 3 track sliding shutters duly fited with neoprene beading , glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainlesss steel wite cloth 0.45 mm dia and average width of aperture 1.4 mm aluminum alloy handles etc. complete all as specified and directed. Note:- Marking all edges i.g cill and jamb good by cement Mortar 1:3.

S&F Aluminium alloy, anodised ,sliding door bolt 300mm long with hasp, staples (bolt type) and fixing clips of sheet, cast or extrudedsection and fixing bolts slinding of extruded section complete all as specified and as directed.

M & L for powder coated aluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

S& F Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc complete all as specified and as directed.

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter, windtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C2 (20mm graded aggregate) as in path/plinth protection etc laid in pannels including finished the surface smooth and even without using extra cement complete all as specified and as directed.

M&L for Hardcore of guage exc 63mmbut n exc. 100 mm, deposited,spread and levelled in layersn exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and all as specified and directed.

M&L for special treatment of sunken portion of WCs as per following stages: Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd (and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction Stage 5:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.

M&L for special treatment of sunken portion of Bath room as per following stages: Stage 1 :- Demolition of Bathroom floor including subbase and preparing the surfaces of existing bath with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd (and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction Stage 5:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in mass filling in sunken portion complete all as specified and as directed.

Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed .

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. (Note :- WPC shall be measured & paid separately)

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound.complete all as specified and directed.

M & L for providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over and including a coat of primer surfaces of wall complete all as specified and directed.

M & L for applying three coat of white wash on ceiling over new plaster surface. complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting tools complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying 2 coats of Oil Bound distemper over 1.5mm to 2mm thick wall putty finished to a even and smooth finish over and including a coat of alkali primer complete all as specified and as directed.

M & L for applying one coat of white wash on ceiling over old decorated surface. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

All as per above item no 40 but skirting including 10 mm thick rendering in CM 1:3 complete all as specified & directed.

M&L for Non skid coloured plain/printed glazed tiles of size 300 x 300 x 6mm to 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks/cills etc & the likes complete laid over and including 15 mm thick cement screen in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe including cutting recess opening for the sink portion and embedding complete all as specified and directed. (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate)

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L Granite (of any type) 18-20mm thick machine cut,in skirting/dado laid over and including 10mm thick backing layer in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for preparation of old steel painted surfaces exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

S&F 2nd Calss hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified & directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm both side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884) complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed.

S&F butt hinges 100mm size medium weight cold rolled mild steel complete all as specified and directed.

S&F for butt hinges 100mm size medium weight stainless steel complete all as specified and as directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F stainless steel sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

M & L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and apply two coat of synthetic enamel paint over and including one coat pink primer complete all as specified and as directed.

S&F aluminium powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed.

S&F in repairs 20mm dia powder coated decorative type curtain rod incl brackets complete all as specified and diretced.

S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia complete all as specified and as directed. (Note: MAKE - CERA/PARRYWARE)

S & F in repair vitreous china wash basin, white flat back , size 450mmx300mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. (Note: MAKE CERA /PARRYWARE / JAQUAR)

S&F in repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making good to floors complete all as specified and as directed. (Note: MAKE - CERA/PARRYWARE/JAQUAR)

S&F in repairs 15mm dia Bib taps cast copper alloy, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed. (Note: MAKE -CONFIRMING TO JAQUAR CAT PART-No. APR -101037 OR EQUIVALENT)

S & F in repairs 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and as directed. (Note: MAKE -JAQUAR CAT PART-No. STE -107053)

S & F in repairs 15mm Concealed stop cock Reduced body with adjustable wall hange or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and as directed.(Note: MAKE -JAQUAR CAT PART-No. STE -107069)

S & F in repairs 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions complete all as specified and as directed. (Note: MAKE -JAQUAR CAT PART-No. STE -107067)

S&F in repairs shower rose 125 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repair health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed. (Note-MAKE-CERA/PARRYWARE).

S & F in repairs 15mm size PVC connections with PTMT nuts of length 450 mm complete all as specified and as directed.

M&L in repairs 40mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc complete all as specified and as directed.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Dismantling existing tanks of any description n exc 1000 ltrs capacity and removing from site complete all as specified & directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top incl float valve) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size all as specified and directed.

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc complete all as specified and as directed.

M&L for cutting holes or through PCC block / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 sqcm but n.exc 400 sq CM complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) internal dia of pipe in 75mm set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) internal dia of pipe in 110mm set in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed.

S&F 75mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with access door complete all as specified and as directed.

S&F 75mm dia PVC (SWR) branch piece Double (single 'Y') equal or unequal with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece Tee (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F for PVC (SWR) floor trap long body type, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F for PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 12.5 mm graded aggregate as in hold fast, cill etc with necessarry form work complete all as specified and as directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 15mm dia, any grade, of any description or in any position including fittings complete all as specified and directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete all as specified and directed.

Supplying and laying 20 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed.

Supplying and laying 25 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed.

M&L for complete removal of existing roof treatment incl brushing and applying neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed.

M&L for averaging 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding incl water proofing compund complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight complete all as specified and as directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying APP modified membrane pre-fabricated , reinforced with non woven polyester , of 3.00 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps complete all as specified and directed.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

Material & labour for machine cut kota stone slab size as in flooring, stair case landing. treads of steps, 18-22mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over including 20mm thick screed bed or bedding in cement mortar 1:6 all as specified and directed.

Material & labour for machine cut kota stone slab size as in skirting, dado, vertical surfaces etc, 20-25mm thick over including backing coat 15mm thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and as directed.

S&F in repair of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- HINDWARE / CERA / NEYCER / PARRYWARE / CLASSIC complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in as in sub base complete all as specified and directed.

M & L for providing prrecast cement concrete 1:2:4 Type B1 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise spefifically provided complete all as specified and as directed.

S&F Window Canopy which is made with a durable polycarbonate sheet and steel brackets for roof covering/cladding to wall, fixed with hold fast complete all as specified and directed.(Note :As per Design approved by GE)

M & L for applying Rising damp-proof coating system with Single component ready to use damp-proof coating Roff Hydamp with filling: 1.SURFACE PREPARATION: Thoroughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc. All large voids or hollow portions must be removed and re-plastered. Non- moving cracks having width upto 5 mm must be filled with Polymer based crack filler. 2 APPLICATION: Apply the first coat of Dr Fixit Dampguard Classic with a paintbrush directly on the prepared surfaces by mixing ( 1 part base:1 part hardner: 1 part of water) . Allow to dry for a minimum 2-3 hrs. Apply one part of DAMPGUARD mixed chemical and 2 parts of OPC white cement/Birla Putty and make the Putty, apply Putty on the entire surface area. Allow it to dry for at least 3-4 hours. Apply the Final coat of Dr Fixit Dampguard Classic on the entire surface and allow the surface to air cure 48 Hrs proceeds to paint.

M & L mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified and as directed.

Demolition of concrete block masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

S&F SS 1st grade Kitchen Plate rack over all size (36x48x10 in inches) conforming to Jainko Cat part No. KRJ-9 complete all as specified and directed.

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works complete all as specified and as directed and as per manufacture instructions. Make : Rajshree plasticwood

All as per Above item no 121 but 18 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item no 121 but 12 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item no 121 but 05 mm thick plain cheluka plywood complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long, roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F brass Handle fabricated type polished of Size 100 mm complete all as specified and as directed.

S&F brass Handle fabricated type polished of Size 75 mm complete all as specified and as directed.

Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface complete all as specified and as directed.

Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface complete all as specified and as directed.

Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface complete all as specified and as directed.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed in stone masonary wall type , fixed on to surface ceiling with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering modular sunken boards/terminal boxes / junction boxes of any shape and size with modular type white plate and frame with suitable brass screws and cup washers

(a) One light point controlled by one way one switch SP 5 Amps ,240 V complete all as specified and as directed.

(b) One light point controlled by two 2 way switch SP 5 Amps ,240 V complete all as specified and as directed.

(c) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V complete all as specified and as directed.

(d) One switch socket outlet 3 Pin, 5 Amps, SP on independent board complete all as specified and as directed.

(e) One switch socket outlet 3 Pin, 5 Amps, SP on same board complete all as specified and as directed.

(f) One bell / buzer point controlled by one push button switches on independent board complete all as specified and as directed.

All as per the above item No 130 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and as directed.

S&F modular switch one way 6 Amps , 1 module type complete all as specified and as directed.

S&F modular switch two way 6 Amps , 1 module type complete all as specified and as directed.

S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and as directed.

S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and as directed.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and as directed.

S&F Bell push 6 Amps 1 module complete all as specified and as directed.

S&F bell Multi music type,240 Volt, Single Pole ISI marked complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as specified and as directed.

Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.

supply & fixing modular fan regulator step type , 2 module complete all as specified and as directed.

M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 4 Sqmm (1x4 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 4 Sqmm ( 2x6 sqmm + 1x4 sqmm ) cable and one meter of conduit will be measured as one unit again.

S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 12 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

S&F sheet metal enclosures for distribution board with MCCB as incommer when MCB to be used TPN ( Triplepole and neutral ) 4 way, 415Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

S&F MCCB of capacity 100 Amps , 415 Volts, rupturing capacity 16 KA complete all as specified and as directed.

S&F MCB SPN, 63 Amps, 240 Volts, rupturing capacity 10 KA."C" Series complete all as specified and as directed.

S&F MCB SPN,40 Amps, 240 Volts, rupturing capacity 10 KA."C" Series complete all as specified and as directed.

S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete all as specified and as directed.

M&L for earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point complete all as specified and as directed.

Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.

(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.

Note for testing :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his own risk and cost to the entire satisfaction of the Engr - in - charge.

S & F angle holder backlite with 1x11 Watt CFL including all fixing acessories and making of connection from ceiling rose to fitting complete all as specified and directed.

Taking down celing fan /exhaust fan/geyser and refixing of the same including all necessary fixing arrangment & civil work complete all as specified and as directed.

Repair of celing fan /exhaust fan, painting,overhauling,greasing and replacement of U/S componante like capacitor to make functional including provision of 3 core flexible copper conductor from ceiling rose to fan complete all as specified and directed .

Taking down electric meter and refixing after complation of work and connecting from DB etc complete all as specified and as directed.

Supply & fix RCBOs double pole 40A for earth leakage, overload & short- circuit protection 30 mA complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Sanjay Enterprise (BID ID -3129306)