Annual Rate Contract For Diffrant Civil Work In Anjar Nagarpalika Area, 2025-26 (R&B Sor Year 2024-25)

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of terrace including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.(i) Brick tile covering.

Removing and scraping of old deteriorated plaster of any thickness fromm wall

/ R.C.C member including stacking of serviceable material and disposal of

Removing dryfrom sitebound

or oil of work with all lead

distemper by aand lift

washing and scraping and sand

6 papering the wall surface smooth including necessary repairs to scratches 1.00 11.42 Sqm

Earthwork & Roadwork

Box cutting the road surface to proper slope and camber for making a base for

road work including removing the excavated stuff and depositing on the road

side slope as directed upto 50Mt.lead.(Executed With Mechanised Efforts/

Preparing surface by Brushing with wire brushes for removing caked mud etc.

sweeping with brooms and finally fanning the cleaned surface with gunney bags

to remove all loose dirt etc.(i) Water bound macadam surface (New)

Preparing surface by Brushing with wire brushes for removing caked mud etc.

9 sweeping with brooms and finally fanning the cleaned surface with gunney bags 1.00 17.70 Sqm

to remove all loose dirt etc.(ii) Black top surface.

Excavation for foundation upto 1.5 m depth including sorting out and stacking

10 of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) 1.00 196.80 Cum

Loose or soft soil

Box cutting the road surface to proper slope and camber for making a base for

11 road work including removing the excavated stuff and depositing on the road 1.00 213.49 Cum

side slope as directed upto 50Mt.lead.(Executed With Manual Labour)

(A) Lime ,murrum,building rubbish,earth,manure or sludge & execavated rock

12 12(1) EXTRA LEAD UPTO 1 KM 1.00 47.57 Cum

12(2) EXTRA LEAD UPTO 1.5 KM 1.00 54.88 Cum

12(3) EXTRA LEAD UPTO 2 KM 1.00 64.86 Cum

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8-

13 hand broken stone aggregates 40 mm nominal size) and curing complete 1.00 2673.71 Cum

excluding cost of formwork in (A) Foundation and Plinth

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level.

Providing and Laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) and finishing smooth

15 with curing etc. complete including the cost of formwork but excluding the cost 1.00 6868.90 Cum

of reinforsement for R.C.C work in (iv) Slabs having more than 13 cm and upto

15 cm.thickness

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand :

16 4-graded stone aggregate 20mm nominal size) laid in one layer and finished 1.00 335.72 Sqm

with a floating coat of neat cement. (B) 50mm thick

Providing and casting in situ ordinary Cement concrete M-200 for R.C.C. solid

slab including centering, scaffolding curing and finishing complete.

Providing and casting in situ ordinary cement concrete concrete M-200 for

approach slab including formwork curing and finishing complete.

Paving & Floor Finishes

Providing and laying white glazed tiles 6mm thick in flooring treads of steps

19 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 1.00 953.58 Sqm

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

20 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- 1.00 1109.27 Sqm

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

21 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry 1.00 1003.83 Sqm

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

23 vibrated mechanically and as per approved design Confirming to IS 15658 : 1.00 699.93 Sqm

2006 including 35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Re-fixing Existing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick including 35 mm Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

25 or slope and to be tempered to bring mortar creme out upto surface using white 1.00 771.98 Sqm

cement including rounding off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as directed.

Providing and casting in situ ordinary cement concrete M-200 for Kerbs / kerb

blocks including formwork, curing and finishing complete.

Plastering & Pointing

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

27 interior plastering upto floor two level and finished even and smooth in (ii) 1.00 121.05 Sqm

Cement mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

28 single or half brick walls for interior plastering upto floor two level and finished 1.00 159.60 Sqm

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 20mm thick cement plaster in single coat on single or half brick walls

29 for interior plastering upto floor two level and finished even and smooth in (ii) 1.00 201.76 Sqm

Cement mortar 1:4 (1-cement :4-sand)

Brick work using common burnt clay building bricks having crushing strength

30 not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- 1.00 4447.28 Cum

Cement : 6 -fine sand) (A) Modular

Brick work using common burnt clay building bricks having crushing strength

31 not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- 1.00 4172.60 Cum

Cement : 6 -fine sand) (B) Conventional

(i) Uncoursed Rubble Masonry with hard stone of approved quality in

32 foundations and plinth in Cement Mortar 1:6 (1-cement : 6-coarse sand 1.00 2561.00 Cum

including levelling up etc. complete

Precast concrete block masonry (including quoin blocks jamb blocks closer

etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6

mix (1- Cement : 3 coarse sand: 6- graded stone aggregates of 20 mm and down

grade) in foundation and plinth cement morter 1:6

34 Barbed wire for fencing of galvanized steel wire 1.00 5762.71 Quintal

Providing and fixing M.S. grills of required pattern to wooden frames of

35 windows etc. with M.S. flats at required spacings and frame alround, square or 1.00 108.00 Kg

round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Steel work, riveted in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A) In beams

36 and joists, channels angles Tees, flats, with connecting plates or angle cleats as 1.00 5831.19 Sqm

in main and cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like.

Providing and fixing M.S. round holding down or anchor bolts with nuts and

washer plates complete.

Colour Work, Painting & Polishing

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and other

foreign matter and scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and

41 other metal surface with enamel paint, brushing to give an even shade including 1.00 57.23 Sqm

cleaning the surface of all dirt, dust and other foreign matter.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Water Supply, Plumbing & Sanitary Fittings

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing and supplying in standard length ISI mark rigid unplasticised PVC

pipes suitable for potable water with ring fit joint including cost of rings, as per

IS specification no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores and including cost of jointing material

etc. complete. Test Pressure 6 Kg/cm2. 110mm Dia.

Drains & Sewerage Items

Rectification of Existing MAN HOLE chembers, Riseing up 5 to 25cm

Average thick of R.C.C coping 1:2:4 with Required form work, Steel, Inside

46 15mm thick cement plaster, Curing and dismentaling existing Chembers Precast 1.00 1176.00 Nos

cement frame and cover and also fitting after Coping work as directed as

R.C.C precast manhole, frame and cover, manufacture, supply and delivery at

store or work precast R.C.C. M200 frame and cover, suitable to drainage

manhole and as per type design and drawing including cost of reinforcement,

47 MS angles or flat, curing, mold work etc.complete. (A) Heavy duty- with 50 cm

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Miscellaneous Works

Providing extra labour charges in for tremix (vaccume dewatering services)

process on CC road surface by using vaccume dewatering pump,floater,surface

vibrator including making grooves,rough finish on surface as per instruction

incluiding levelling etc.complete

Material Supply & Installation

Supplying and fixing of Rubber Speed breakers of height 50mm (Size 500 x

350 x 50mm) made of Rubber material having Maximum Load Capacity of 50-

75 (Tonne), 4 no. of Reflector Provided in each unit,Weight in 11-15(Kg) as

directed by Engineer-incharge. (Product id: 5116877-41985566767)

Supplying and fixing of Road Delineator 751-800 Cylindrical, Type Fixed,

Material-HDPE, Shape Cylindrical, Reflective Tape-Yes, One top and one

bottom cap forcovering of tube, Availability of Hole/ Hook for Chain - Yes,

Number of hole/ Hook-2, Height (in MM)-751-800,Base Body Diameter(in

MM)-40 Complete as directed by engineer-in-charge. (Product id:5116877-

Say Total Amount

Say Total Amount

I/We am/are willing to carry out the work at ________% above/below (Percent Should be

written in figures and in words) of the estimated rates mentioned above. Amount of my/our tender

works out as under.

*Estimated Amount *Estimated Amount

Put to tender Rs. Put to tender Rs.

Deduct _______ % Below Rs. Add _______ % Above Rs.

Net Rs. Net Rs.

*(Please Strike out which ever is Not applicable)

Note 1 :- All work shall be carried out as per Public works department handbook and other specifications of division or as

Note 2 :- All the columns is schedule should be filled in ink and the total of the entries in the last column should be struck by the

Note 3 :- Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for

Note 4 :- To be continued on additional sheets, if found necessary.

Signature of Bidder Chief Officer

Anjar Nagarpalika