(1) Metallizing and transportation of RDSO standard RH girders from EWS/AJJ to various locations in Palakkad division & supply and fixing of Galvanized H beam sleepers & fittings (2) Construction of shed for storage of materials at Palakkad.

Vol.I & Vol .II ) except reinforcement steel

Item- 01 Construction of Shed

S No. Item Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in

2.6 width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from

natural sources)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

3 4.3.1 Foundations, footings, bases for columns Sqm 24 307.95 7390.8

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified grade

of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

derived from natural sources: 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

7.0 STONE WORK

7.1S RANDOM RUBBLE MASONRY

Random rubble masonry with hard stone in

foundation and plinth including levelling up with

7.1 cement concrete 1:6:12 (1 cement : 6 coarse

sand : 12 graded stone aggregate 20 mm

nominal size) upto plinth level with :

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded Kg 4500 111.95 503775

in built up sections, trusses and framed work,

7 including cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete.

12.0 ROOFING

Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

PALAKKAD DIVISION-ENGINEERING/SOUTHERN RLY

Providing & fixing at all heights, levels and

locations Mill finish Aluminium alloy roofing

sheets of alloy IS designation 31500, temper

Hx8 conforming to IS 737 and dimensions as

per IS code 2676 with characteristics of good

formability and corrosion resistance. The profile

sheets shall be fixed to truss members in slope

or required pitch or curvature with Hex cap

headed self drilling/tapping Stainless steel

screws M6, 50 mm long with 3 mm EPDM seal

washer etc. all inclusive of labour, scaffolding,

T&P and sundries etc. complete as per

directions of the Engineer-In-Charge. (Cost of

truss/frame work shall be paid separately).

12.64.2 0.71 mm, troughed profile with center to center Sqm 72 1158.8 83433.6

8 pitch of 200 mm, depth of 32 mm, overall

profile width1092 mm, cover width 1000mm.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.44S EXTERIOR FINISHING

Finishing walls with water proofing cement

paint of required shade :

13.44.1 New work (Two or more coats applied @ 3.84 Sqm 168 97.6 16396.8

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Schedule C-List of Items of Works covered by the SRUSSOR - 2021 for TVC & PGT Division except

Schedule Cement & Reinforcement steel for which tenderer has to quote percentage rate over, below or at

par to the SRUSSOR 2021 rate.

Item- 01 Galvanized H beam sleeper and fittings

S No. Item Description of Item Unit Qty Rate Amount

1 195020 Fabrication & supply of Galvanized H-beam MT 89.00 156861.20 13960646.80

Sleepers made out of the materials confirming

to IS 2062 of standard Rolled sections as per

approved drawing Nos RDSO/B/1636/4/R,5&9

complete and as directed by Engineer-in

charge. Note: Cost of steel fittings and GRSP

shall be paid separately.

dia. & 320mm long as per RDSO Drg. no. BA-

1636/I/R2 from RDSO approved sources

Elastomeric Pads 25mm / 30mm thick and 4

nos of Grooved rubber pads as per RDSO

drawing No. B/1636/5 alt 2 to suit Insulated H

Beam sleepers from RDSO approved sources

with all contractor's material, lead, lift, labour,

tools, plant and transportation etc. complete as

per approved drawings and as instructed by

Engineer in-charge. Note: One Set consists of 2

nos. Elastomeric Pad 25mm/30mm and 4 nos.

Grooved Rubber Pad.

PALAKKAD DIVISION-ENGINEERING/SOUTHERN RLY

4 201080 Supplying of Zero toe load fixtures for H Beam Set 550.00 27056.81 14881245.50

sleepers of 52/60Kg Rails procured from RDSO

approved firms as per RDSO approved drawing

with up-to-date correction slips and

specifications with all contractor's lead, lift,

labour, tools, plant, transportation etc.

complete as per instructions of Engineer in-

charge. Note: Complete fixture for 1 sleeper

shall constitute 1 set.