PROVN OF TEMPORARY OTM ACCN FOR TECH SITE OF 342 TRU AT AF STN BHUJ

Supply and Fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core, cross-sectional area 25 sqmm.

Supply & Fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 way with 200 Amp rated bus bar 415 volts powder coated all as specified by Engr-in-charge.

Supply & Fix isolators/MCBs of the under mentioned type and ratig and fixing in DBs(DBs measured and paid for separately) for the following:-

SPN 240 volts 6-40 Amps capacity, 'C' series

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth and getting out in looses/ soft soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading leveling watering and well ramming in layers n.exc. 25 cm each layer complete all as specified and directed by Engineer-in-Charge.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Tubes, 'Medium grade' galvanised, withall fitting and fixed complete to laid in trenches complete all as specified and directed of the following size:-

50 mm Bore

25 mm Bore

Supply and fixing gun metal, globe or gate valve with iron wheel head, screwed both end for iron pipe complete of the following sizes:-

25 mm Bore

M&L For Cutting existing steel tubing for alterations or additions (Each cut measured) cutting of existing DI/GI pipe of size 80 mm dia and install a Tee joint of size 80 x 80 x 50 mm complete all as specified and directed by engr-in-charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete

Rolling consolidating formation surface by rolling with 8 to 10 ton roller complete all as specified

M&L hard core of gauge not exceeding 63 mm deposited spread and levelled watered and well rammed to a true layers complete

M&L PCC 1:4:8 type D 2 100 mm thick by using 40 mm graded curshed stone aggregate as in floor finishes complete all as specified including necessary formwork.

M&L PCC 1:2:4 type B2 100 mm thick by using 20 mm graded curshed stone aggregate as in floor finishes complete all as specified including necessary formwork.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound with sealing compound of Grade 'B' material,complete all as specified and as directed by the EIC.

Supply & fix prefab containers of standard size( 15ft x 10ft x 8.6ft) with flat roof and standard quality as per following manufacturer's specifications. (a) Size- 15 X 10 X 8.6FT Portable Office Cabin (b) Structure- 4 X 2 inch – square pipe, cross member of 3 X 1.5 inch square pipe, overall framework, internal, external cladding with insulation & other peripherals. (c) Roof- 2 Side slope roof of MS plane sheet welded with MS frame structure, adequate roof bows top inner decorated with 7MM thick MDF laminated board. (d) Outer wall-MS 1 MM Corrugated bended sheet welded on MS frame. (e) Post corner-2.0 X 2.0 square pipe (f) Internal wall paneling- 7mm thick MDF sheet will be applied on wall. (g) Door-Frame work by 3 X 6.5 square pipe external wall made by MS sheet & inner wall decorated by 4MM ACP sheet. IF handle and Hold Draft.(Suitable lockable arrangement) (h) Insulation-25 MM thick glass wool shall be used for wall and 50MM thick glass wool to be provided for roof which will be rot proof, fire retardant, non-hygroscopic and vermin proof.(DENSITY 16KG/M3 ) (j) Window-3’ x 3’ window shall be aluminium double shutter sliding type with black powder coating & grill 4 mm thick glass shall be clear.(With Monsoon shade and safety grill) (k) Paint-Epoxy zinc phosphate primer and synthetic epoxy paint used for final 2 coats(Corrosion free and fire proof paints)

(l) Electric-Concealed Electrical Copper cables & wiring suitable for 250 volts 50 Hz single phase AC power supply. Copper cables used. HEAT RESISTANT FLAME RESISTANCE. (m) Flooring- 18MM thick cement board with PVC vinyl carpet 1.2mm thick (n) Legs- 6 inch height legs will provided to the container. (o) Lifting hook-Specially formed hooks will be there at all two corners of top for easy lifting and shifting. (p) Bulked light 10 W STYLO -Two bulked light will be provided outside the cabin above the door. Cabin Fan size 12 inch -01 No LED light-15 W 04 Nos Normal window- 02 Nos (standard size ) AC provision- 01 Nos (standard size ) MCB- 01 Nos (Suitable size and capacity ) Main door-01 Nos (Make: MS) Switch board- 01 Nos (As per layout) Electric wiring- (As per layout)

Supply & fix Prefab containers of standard size(10ft x 4ft x 8.6ft) with flat roof and standard quality as in toilets with all required sanitary fittings as per following manufacturer specifications.. (a) Size- 10 X 4 X 8.6FT Portable Toilet Cabin (b) Structure- 4X2 inch – square pipe, Cross Member of 3 X 1.5 inch square pipe, overall framework, internal, external cladding with insulation & other peripherals. (c) Roof-Plain roof of MS plane sheet welded with MS frame structure Adequate roof bows top inner decorated with 7mm thick MDF laminated board. (d) Outer wall-MS 1 MM Corrugated bended sheet welded on MS frame (e) Post corner-2.0 X 2.0 square pipe (f) Internal wall paneling-4mm thick ACP sheet will be applied on wall. (g) Door-Frame work by 2 X 6.0 square pipe external wall made by MS sheet & inner wall decorated by 4MM ACP Sheet. IF handle and Hold Draft. (Suitable lockable arrangement) (h)Paint-Epoxy zinc phosphate primer and synthetic epoxy paint used for final 2 coats (Corrosion free and fire proof paints) (j) Electric-Concealed Electrical Copper cables & wiring suitable for 250 volts 50 Hz single phase AC power supply. Copper cables will be used. (k) Flooring-18MM thick cement board with PVC vinyl carpet 1.2mm thick

(n) Legs-6 inch height legs will provide to the container. (o) Lifting hook-Specially formed hooks will be there at all two corners of top for easy lifting and shifting. (p) Bulked light-One bulked light will be provided outside the cabin above the door. Ex Fan-02 Nos (Suitable size and capacity ) LED light-03 Nos((Suitable size and capacity ) Toilet door-02 Nos(As per standard zise) Urinal-02 Nos( EWC-01 Nos( Wash basin-02 Nos MCB- 01 Nos (Suitable size and capacity ) Switch board -01 No (As per layout) Electric wiring (As per layout)

M&L Plain Cement concrete (1:4:8:) type D2 (40mm graded aggregate) in foundations, filling and mass concrete

M&L for block masonry with precast cement concrete type C-1(1:3:6) (20mm graded aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:6.

M&L for Providing, cement concrete as in coping Type B0 1:2:4 using 12.5mm graded aggregate

M&L LLDPE septic tanks of 10 users designed to carry sewage and sullage water, excavation in any type of soil PCC 1:4:8 below foundation, vent shaft etc complete.with upflow filter including dia

Construction of soak well 1.8 m dia and 4.5 mtr deep including in any type of soil PCC 1:3:6 wall of hone combed masonry.

S&F Double wall corrugated HDPE pipe 150mm dia SN4, confirming to IS16098(Part-II) single socketed in any length, laid in trenches or floor etc all as specified and directed by Engr-in-Charge

M&L for Concrete bed to 150mm dia & above drain pipes in cement concrete 1 : 4 : 8 type D-2 using 40mm graded crushed stone aggregate including packing under, and completely surrounding pipes with concrete after they are laid and tested complete specificaly for pipes under road payments or crossings etc

M&L for precast cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for man holes and set in CM 1:4 incl necessary form work all as specified.( Note : Reinforcement steel shall be measured and paid separately)

Supply and fixing 750 ltr capacity Rotational moulded polythelene water storage tank, three layered, ISI marked, cylindrical vertical with closed top complete

S&F 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) Complete all as specified.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 MM DIA BORE COMPLETE

S&F CPVC pipes ISI marked with all fittings fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of plain CPVC)

20mm nominal dia of pipes

25mm nominal dia of pipes