Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.2 LAccepted-Finance T 1 GARDEN VIEW APARTMENT NEW BANKER COLONY MUNDRA ROAD BHUJ KUTCH GUJ 370001 | KACHCHH | GUJARAT | 370001 | ₹20.2 L | L-1 | Accepted-Finance Lowest |
| 2 | L-2₹22.0 LRejected-Finance C O BHAGYODAY STORES BAZAR CHOWK NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | ₹22.0 L | L-2 | Rejected-Finance Due to not lowest |
| 3 | L-3₹23.1 LRejected-Finance KALATALAV TA ABDASA DIST KUTCH GUJARAT PIN 370 660 | KACHCHH | GUJARAT | 370660 | ₹23.1 L | L-3 | Rejected-Finance Due to not lowest |
| Sl No | Description | Qty | Unit | Krishna Engineering L2 | Venus Engineering L1 | Hari Construction L3 |
|---|---|---|---|---|---|---|
| 1.00 | Complete removal of existing water proofing treatment from top of roof and canopies/ chajjas of buildings including removing the debris outside of MD land and earthing strip, electric cable complete all as specified and directed.
Note :-Earthing strip and cable to be refixed at the same place after execution of APP. | 408.5 | SQUARE METRE | 38 ₹15,523 | 100 ₹40,850 | 30 ₹12,255 |
| 2.00 | Material and labour for PCC 1:2:4, Type B0 (using 12.50mm graded stone aggregate) in roof kerbs and padding or mud stops, rounded or chamfered on edge complete all as specified and as directed. | 10.21 | CUBIC METRE | 8,600 ₹87,806 | 8,500 ₹86,785 | 8,700 ₹88,827 |
| 3.00 | Material and labour 10mm thick rendering in CM 1:3 on roof slab/canopies/ chajjas with water proofing compound @ 3 % of weight of cement and making plastered surfaces to receive water proofing treatment (finished fair and even) complete all as specified and as directed.
Note:- Water proofing compound will be measured and paid for seperately as supply only. | 408.5 | SQUARE METRE | 290 ₹1.2 L | 300 ₹1.2 L | 290 ₹1.2 L |
| 4.00 | Supply only integral water proofing compound complete all as specified and as directed. | 148.8 | KILOGRAM | 90 ₹13,392 | 100 ₹14,880 | 80 ₹11,904 |
| 5.00 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed. | 40 | RUNNING METRE | 110 ₹4,400 | 150 ₹6,000 | 100 ₹4,000 |
| 6.00 | Material and labour for preparing, clean and dry plastered roof surfaces and applying APP modified water proofing membrane mineral finish with non woven polyster reinforcement/mat not less than 3mm thick having weight not less than 3kg/Sqm including and surface painting, with a layer of blown grade bitumen confirming to IS :3384 applied @ .250 kg per sqm, all as per manufacturers instructions complete all as specified and as directed. | 408.5 | SQUARE METRE | 775 ₹3.2 L | 600 ₹2.5 L | 800 ₹3.3 L |
| 7.00 | Dismantling of cement concrete any description and in any position complete all as specified and directed. | 29.81 | CUBIC METRE | 1,275 ₹38,007.75 | 600 ₹17,886 | 1,250 ₹37,262.50 |
| 8.00 | Dismantling of stone slabs in floor apron etc laid bedded and pointed in cement mortar and removing to out side MD land complete all as specified and directed. | 5 | 10 SQUARE METRE | 675 ₹3,375 | 500 ₹2,500 | 650 ₹3,250 |
| 9.00 | Material and labour for 25mm thick PCC 1:2:4, type B0 (using12.5 mm graded stone aggregate ) as in sub floors as in level course complete all as specified and directed. | 50 | SQUARE METRE | 225 ₹11,250 | 400 ₹20,000 | 210 ₹10,500 |
| 10.00 | Material and labour for machine cut Kota stone slab flooring 20-25mm thick and over and including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing and cut as per local trade practice and cut to shape of required size complete all as specified and directed. | 50 | SQUARE METRE | 1,315 ₹65,750 | 1,100 ₹55,000 | 1,300 ₹65,000 |
Updated dates
Tender Value
₹20.2 L
EMD Value
₹40,400
Closing Date
12 Jan 2026, 6:00 pmClosed
Garrison Engineer (AF) Naliya No. 1
Garrison Engineer (AF) Naliya 1
SPECIAL REPAIR TO MT SECTION AT AF STATION NALIYA
2025_MES_744821_1
8092/E8
Open Tender
Miscellaneous Works
180 days
Air Force Station Naliya
As per Tender Documents
7 documents required · 7 mandatory
₹500
GE(AF) Naliya No. 1
₹40,400
Yes
1 Jun 2026
17 Dec 2025
14 Jan 2026
17 Dec 2025
12 Jan 2026
31 Dec 2025
Supplying and laying unreinforced precast cement concrete cable covers, Class LV, Type- 1, Flat, size 250 mm x 150 mm x 40 mm in trenches for cable protection, embossed with "LT 1100 VOLTS ELECTRIC" on the top surface complete all as specified and as directed.
Material and labour for PCC 1:2:4, Type B0 (using 12.50mm graded stone aggregate) in roof kerbs and padding or mud stops, rounded or chamfered on edge complete all as specified and as directed.
Material and labour 10mm thick rendering in CM 1:3 on roof slab/canopies/ chajjas with water proofing compound @ 3 % of weight of cement and making plastered surfaces to receive water proofing treatment (finished fair and even) complete all as specified and as directed. Note:- Water proofing compound will be measured and paid for seperately as supply only.
Supply only integral water proofing compound complete all as specified and as directed.
Complete removal of existing water proofing treatment from top of roof and canopies/ chajjas of buildings including removing the debris outside of MD land and earthing strip, electric cable complete all as specified and directed. Note :-Earthing strip and cable to be refixed at the same place after execution of APP.
Dismantling of cement concrete any description and in any position complete all as specified and directed.
Material and labour for kota stone slab 20-25mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing dismantled tiles to outside MD land and rubbish off the premises complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles, 350X250X7mm/ 450X350X7mm thick in size, set on vertical surfaces such as skirting, dado, etc,over and including 10mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles, complete all as specified and as directed.
Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM 1:4, complete all as specified and directed.
Supply and fix powder coated aluminium frame of standard section for doors,and partitions with double rebates including joining cleat for fixing etc. complete all as specified and directed.
Material and labour for powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 No.) suitable handle (2 No.) complete all as specified. Note :- Glass / Wiremesh shall be measured and paid seperately.
Material and labour for sheet glass 4.8 mm thick ordinalry quality and glazing with aluminium beeds in square exceeding 0.50 sqm in each pane complete all as specified and directed.
Supply and fix steel rolling shutters of thickness 1.25mm , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type including gear operated type with bevel gear box and crank handle complete all as specified and directed.
Material and labour for two coats of sythentic enamel paint on new steel painted sufaces including prearation of surfaces10 cm width or girth including one coat of red oxide zinc primer complete all as specified & as directed.
Supply and fix in repair, aluminum anodised grill of 7 mm dia rod square, rectangular, circular or similar type of shape aperture not exceeding 7.00cm in length or width fixed with H or F channel 38 mm x 12 mm x 1.30 mm complete all as specified and as directed. Make :- Sec No 8778, Grill No 20 of Decoare or equivalent
Dismantling of brick work or PCC blocks/stone masonary built in cement mortar complete all as specified and directed.
Material and labour for pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in block masonery exceeding 10cm in width with solid block masonery with solid blocks, setting in CM 1:6 complete all as specified and directed.
Material and labour for preparing, clean and dry plastered roof surfaces and applying APP modified water proofing membrane mineral finish with non woven polyster reinforcement/mat not less than 3mm thick having weight not less than 3kg/Sqm including and surface painting, with a layer of blown grade bitumen confirming to IS :3384 applied @ .250 kg per sqm, all as per manufacturers instructions complete all as specified and as directed.
Material and labour for 5mm thick rendering in CM 1:3 on ceiling surface finished fair and smooth without using extra cement complete all as specified and directed.
Material and labour 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces complete all as specified and directed.
Material and labour for 15mm thick rendering in two layer, 1st layer of 10mm thick in CM 1:4 and second layer of 5mm thick in CM 1:4 with WPC @ 3% of by weight of cement on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered and unplastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation newly plastered and unplastered surfaces of wall and applying two coats of white washing complete all as specified and directed.
Material and labour for preperation of new plastered surface of wall and applying two coats of 100% premium acrylic emulsion paint ( Weather Proof) camoufaulage pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Material and labour for repairing the edge/corner of chajja /roof/projection down ward type and similar work by using cement concrete 1:2:4, type B0 (using 12.50 mm graded stone aggregate) including necessary formwark & 5mm thick cement plaster in CM 1:4 to match with existing surface complete all as specified and directed.
Material and labour for 75mm thick PCC 1:2:4, type B-2 (using 20mm graded stone aggregate) as in sub base of floor and path, plinth protection etc.complete all as specified and directed.
Material and labour for 100mm thick PCC 1:2:4 type B-2 (using 20mm graded stone aggregate) as in floor and path, etc. complete all as specified and directed.
Material and labour for forming contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.
Material and labour for forming construction joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.
Taking down copper/aluminum point wiring (light, fan, socket or power) complete and including (fitting and fixture such as switches, socket ,ceiling rose ,pendent ,regulators,light fittings, etc to be measured separetaly) Note:- Job including for taking out old gutties,screw,nails,casing caping/conduit etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.
Material and labour for point wiring with 1.5 sqmm FRLS single core PVC insulated unsheathed 1100 V grade with multistranded copper conductor drawn through PVC conduit with all accessories concealed in the wall /roofs etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly complete all as specified and directed for following:-
One light/fan point controlled by one switch.
One socket 3 pin outlet 5 amp on independent board.
One 3 pin socket outlet 5 amp on the same board with other switches.
All as per serial item number 42.00 here-in-before but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sqmm 2.5 sqmm copper cable as earth continuity conductor complete all as specified and directed.
Supply & fix moduler switch 1 way 6A 1 module complete all as specified and directed.
Supply & fix moduler switch 1 way 16A 1 module complete all as specified and directed.
Supply & fix ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified and directed.
Supply & fix moduler socket 6A/16A, 2/3 pin combined,2 module complete all as specified and directed.
Supply & fix moduler socket 6A 2/3 pin combined,2 module complete all as specified and directed.
Supply & fix moduler fan regulator 120 W. 2 module complete all as specified and directed.
Supply & fix moduler white cover plate with frame. 3 module complete all as specified and directed.
Supply & fix moduler white cover plate with frame. 6 module complete all as specified and directed.
Supply & fix moduler metal flush box 3 module complete all as specified and directed.
Supply & fix moduler metal flush box 6 module complete all as specified and directed.
Supply & fix LED light fitting 1x20watt , 220V, AC decorative box type with driver, holder,including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.
Supply and fix sub main wiring drawing through PVC conduit concealed in wall/roof with four single core 4 sq mm and two run of 4 sqmm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and directed.
Supply and fix sub main wiring drawing through PVC conduit concealed in wall/roof with two single core 4 sqmm and one run of 4 sqmm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and directed.
Supply and fix MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall complete all as specified and directed.
Supply and fix MCB DB SPN 12 ways double door with 240 Volt, 200 amps rated bus bar with all accessories fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall complete all as specified and directed.
Supply & fix 415V 10KA 'C' curve Miniature circuit breaker(MCB) of Triple pole and neutral 63 amps Complete with connection testing and commissioning complete all as specified and directed.
Supply & fix 240V 10KA 'C' curve Miniature circuit breaker(MCB) of Single pole and neutral 32 amps Complete with connection testing and commissioning complete all as specified and directed.
Supply & fix 240V 10KA 'C' curve Miniature circuit breaker(MCB) of Single pole 5 to 32 amps Complete with connection testing and commissioning complete all as specified and directed.
Supply and hanging /fixing in repair ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, minium 26W (± 10%), Temperature rise 40 degree maximum without remote with and including operative based capacitive regulator, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suita
ble size from ceiling rose to fan complete all as specified and directed.
Supply & fix in repair/replacement of LED flame proof well glass in die cast aluminum housing with heat resistant toughened glass, 70watt , IP65 protected and including all accessories, connecting up with flexible copper conductor 1.5 Sqmm 3core covered with flexible metal conduit of suitable size complete all as specified and directed.
Supply and fix flame proof/ weather proof exhaust fan, single phase,230 volt 450mm sweep, 0.25HP motor suitable for wall mounting with louvers complete all as specified and directed.
Supply and fix flameproof weatherproof distribution board aluminum die cast alloy in LM6 material sheet metal enclosure incl MCB 32Amp SPN(Incomer) and 04 Nos SP 6-32 Amp(Outgoing) terminal, wiring and incl all fitting accessories etc complete all as specified and as directed.
Supply and fix in repair switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed
Material and labour for sub main wiring with 3 run single core multistranded copper conductor cable, of size 1.5Sqmm, PVC insulated, unsheathed, FRLSH drawn through and including heavy duty ERW steel conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 1.5 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete including taking down old sub main wiring complete all as specified and directed. Note:- 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment.
EACH Set
Material and labour for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of LT UG cable pipe line, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil complete all as specified and as directed.
Removing excavated material (Soil) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point all complete all as specified and as directed.
Material and labour for clean dry river sand in trenches/ ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid separately.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm, 3.5 Core complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm, 2 Core complete all as specified and directed.
Supply and fix 4 pole MCCB 63 Amp, 50Hz , 415 V with rupturing capacity 25KA complete all as specified and directed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_833997.xls
BOQ • 0.67 MB
Gen8092.pdf
Tender Documents • 1.35 MB
Download all tender documents and submit your bid