Renovation of Balance portion of Existing 33 KV line

Amount

Supply and installation of 11 Mtr. Long Pole(ST-410 SP 56)

Supply and installation GI V cross-arm with top Bracket including clamp

Supply and installation GI Channel X-arm including clamps and braces

Supply and installation 50 mm² ACSR Conductor

Supply and installation PG Clamps for 50mm² ACSR conductor

Supply and installation 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply and installation 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm alongwith single tension fittings (6 Bolt).

Supply and installation 33KV isolator with earthing Blade (36KV, 800A, outdoor, 3poles, 25KV)

Supply and installation Galvinized Nuts and Bolts.

Supply and installation Danger Plates with Clamps

Supply and installation Anti-Climbing Device with Clamps

Supply and installation Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3mm

Painting of poles along with all the accessories with 2 coats of red oxide then 2 or more coats of aluminuim paint

Cement bottoming 1:2:4 mix as per Standards 0.6cum

Supply and installation Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (300x 300 x 8 ) mm, nut- bolts, 2 Nos turn-buckles, 1.8m long,20 mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete

Testing of commissioning of the 33kV line.

Dismantling of old /damaged ST poles and shifting of same to divisional stores/apropriate location

Dismantling of old /damaged Lattice poles and shifting of same to divisional stores/apropriate location

Dismantling of old /damaged DW poles and shifting of same to divisional stores/apropriate location

Dismantling of old V-Cross Arms and shifting of same to divisional stores/apropriate location

Dismantling of old Channel Iron Cross Arms alongwith braces off sizes and shifting of same to divisional stores/apropriate location

Dismantling of old 11KV Pin insulatotrs complete and shifting of same to divisional stores/apropriate location

Dismantling of old Disc insulatotrs with fittings and shifting of same to divisional stores/apropriate location

Dismantling of old Channel Iron Cross Arm of different length and shifting of same to divisional stores/apropriate location

Dismantling of old obsolete 30mm² ACSR Conductor and shifting of same to divisional stores

M/S WATT ELECTRICAL CONTRACTS (BID ID -2211152)

UMAR ELECTRICALS (BID ID -2211706)