DMF

Work 1 Balance Construction of Community hall in SC area at Gowravaram village, Jaggaiahpeta (M) Est.Rs.15.00 lakhs Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST under Steps.

Work 1 Painting to New Wood work with two coats of Ready mixed Synthetic Enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, Sales & other taxes , all operational, incidental and labour charges etc.complete for finished item of work (3 Coats) including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 1 Flooring with Nano polished Vitrified floor tiles of size 600x600 mm (8-10mm), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 1 Providing skirting to internal walls to 15 cm height/risers of steps with Nano polished Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Work 1 Masonry Work in C.M.(1;8) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for Super structure.

Work 1 Masonry Work in C.M.(1;6) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for basement

Work 1 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% but excluding & GST (APSS No. 911) For interior walls

Work 1 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST.- For exterior walls

Work 1 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST

Work 1 Flooring with Ceramic tiles , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 1 Supply and fixing of Medium Sal wood door of size 1.05x2.10Mts with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Supply and fixing of Medium Sal wood Window of size 1.22 x 1.37Mts with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Ornamental plastering with CM (1:5) 8mm thick including cost and conveyance of all materials all labour charges etc., complete including Overhead charges & Contractor's Profit @13.615% excluding Seigniorage charges & GST.

Work 1 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% excluding Seigniorage charges & GST

Work 1 Construction of Toilets Earth Work Excavation for foundations and depositing on bank with an initial lead of 10m including all operational , incidental, labour Charges such as shoring, Sheething, planking, strutting, etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.

Work 1 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Footings.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheadcharges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Pedastals.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheadcharges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Plinth Beams.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Columns.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Roof Beams.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contracto'rs Profit @13.615% but excluding Seigneorage charges and GST.-For 100mm Th.Roof Slab

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheads and Contractors Profit @13.615% but excluding Seigneorage charges and GST.-For Lintels.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Sunshades.

Work 1 Masonry Work in C.M.(1;8) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for Superstructure.

Work 1 Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,hire charges of T&P etc complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.

Work 1 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST

Work 1 Painting to New Wood work with two coats of Ready mixed Synthetic Enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, Sales & other taxes , all operational, incidental and labour charges etc.complete for finished item of work (3 Coats) including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 1 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 1 Ornamental plastering with CM (1:5) 8mm thick including cost and conveyance of all materials all labour charges etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 1 Flooring with Ceramic tiles , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 1 Supplying and Fixing indian type water closet including all fixtures and all labour charges etc complete including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Supply and fixing of Medium Sal wood door frame with flush door shutter of size 0.75 x 2.10 mts with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Cost and supply of 1200mm dia RCC Well Rings to depth of0.30 Mts including lowering into soak pit including cost and conveyance of all materials and labour charges etc. complete for Soak Pit.

Work 1 Cost and supply of 1200mm dia RCC cover over RCC Well Rings including cost and conveyance of all materials and labour charges etc. complete

Work 1 White washing with two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc.complete for finished item of work including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 1 Cost and supply of HYSD bars including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractors profit @13.615% but excluding GST.

Work 1 Construction of compound wall Earth Work Excavation for foundations and depositing on bank with an initial lead of 10m including all operational , incidental, labour Charges such as shoring, Sheething, planking, strutting, etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.

Work 1 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST (APSS No. 402)-Levelling Course.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Footings.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Pedastals.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Plinth Beams.

Work 1 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Columns.

Work 1 Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,hire charges of T&P etc complete for finished item of work including Overheads and Contractors Profit @13.615% but excluding Seigneorage charges and GST.

Work 1 Masonry Work in C.M.(1;8) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead Charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for Super structure.

Work 1 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% excluding Seigniorage charges & GST

Work 1 Painting to New iron work with two coats of Ready mixed Synthetic Enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc.complete for finished item of work (3 Coats) including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 1 Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 1 Cost and supply of HYSD bars including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 1 Electrification Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Wall with all required accessories including masonary work and labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi ., complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supplying & run of 2 of 4 Sqmm 56/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 1 Supply and fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in 1) on modular cover frame including earth connection and all labour charges etc., complete on wall. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch Board with earth continuity including wire lleads , earth connections along with all labour charges etc. complete including Over head Charges and Contracto'rs Profit @ 13.615% but excluding GST.

Work 1 Supply of Mini Modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead Charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.ELEC-3.8.16 complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Supply and fixing SPN Distribution board with IP-43 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Work 1 Providing Water Supply Drilling of 165mm dia Bore Well with DTH Rig inhard rock in all soils and reaming the bore to suit insertion of 180mm dia 6 Kg/ Sq.Cm casing pipe including flushing the bore and testing the yield etc complete including Overhead Charges and Contractor's profit @13.615% .

Work 1 Supply and fixing of 180mm dia 6Kg/Sq.Cm PVC Casing pipe including all charges complete including overhead charges and contractor's profit @13.615% but excluding GST.

Work 1 Supply and Erecting, ISI mark submersible 1.0 H.P. ,Single Phase 18 stages pumpset suitable for 106/156 mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, Pump coupling and pivot of Single Phase 250V,50HZ, A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc, with necessary H- type clamp of Suitable size and strength including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Fabrication,transportation and supply of suitable size panel board for single phase submersible motor upto 3 H.P. consisting of relay, conductor, starter and running capacitors,Voltmeter,Ammemeter,indicator lamps,MCB,on/offf switch including supply and fixing of DOL starter of complete including overhead charges and contractor's [email protected]% but excluding GST.

Work 1 Providing and placing on Terrace (at all floor levels ) Polythylene water storage tank with double layer approved brand and manufacture with cover and suitable looking arrangements and making necessary wholes for inlet and outlet pipes and labour chargs etc. complete including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 1 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007) including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 22.20mm OD pipe -SDR 13.5

Work 1 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR11 and SDR13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007 including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 28.60mm OD pipe -SDR 13.5

Work 1 Manufacture, Supply & Delivery of HDPE Pipes confirming to IS-4984-2016 including transportation to any where in A.P. Excluding all taxes (Supply up to 90mm dia in Coil & above 90mm Dia.Straight length) 6.00Kg/Sqcm including overhead charges and contractor's profit @ 13.615% but excluding GST.

Work 2 Construction of balance construction of community hall at Malkapuram(V) of Jaggaiahpeta(M) Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Work 2 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Lintels

Work 2 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades

Work 2 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof beams

Work 2 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding seigniorage charges & GST -For Roof slab of 125mm thick

Work 2 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 2 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST

Work 2 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 2 Ornamental Plastering with CM (1:5) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 2 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 2 Flooring with 15-18 mm thick polished Shabad stones set over base coat of CM (1:8)12mm thick over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work including over head charges and contractor's profit @ 13.615% , but excluding seigniorage charges & GST.

Work 2 Providing skirting to internal walls to 15 cm height/risers of steps with 15-18 mm thick polished shabad stones length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Work 2 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 2 Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) including over head charges and contractor's profit @ 13.615% , but excluding seigniorage charges & GS

Work 2 Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and fixing of Flush Door shutter of size 1.05 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC „C‟ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the „C‟ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer‟s specification & drawing for finished item of work Door (0.75 2.10).

Work 2 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - For exterior walls

Work 2 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 911) Including Overhead charges & Contracto'rs Profit @ 13.615% but exculding GST- for Interior walls

Work 2 Painting to New Wood work with two coats of Ready mixed Synthetic Enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, Sales & other taxes , all operational, incidental and labour charges etc.complete for finished item of work (3 Coats) including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 2 Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, amnd labour charges such as cutting, bending,placing in position, tying Etc. including overhead charges and contractor's profit @13.615% but excluding GST.

Work 2 Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Providing Water Supply Drilling of Bore Well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consulidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bare well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings. caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS-2800 Part I & II 1979 and amended from time to time, including Overhead Charges and Contractor's profit @13.615% .

Work 2 Cost and Supply and fixing of Caring pipe 180mm dia PVC 6Kg/sq.cm inciduong cost and conveyance of all materials and all labour charges etc., completede including overhead charges and contractor's profit @13.615% but excluding GST.

Work 2 Cost and Supply and fixing of Bore cap 180mm dia PVC 6Kg/sq.cm inciduong cost and 3 conveyance of all materials and all labour charges etc., completed including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Work 2 Supply and Transportation of Outer dia 50mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN 500 86/IS 14930 Part-II Makes : DURA LINE (Dura Guard) or its equivalent mak including overhead charges and contractor's [email protected]% but excluding GST.

Work 2 Supply of 3 Core 2.5 Sqm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990 including overhead charges and contractor's [email protected]% but excluding GST.

Work 2 Fabrication,transportation and supply of suitable size panel board for single phase submersible motor upto 3 H.P. consisting of relay, conductor, starter and running capacitors,Voltmeter,Ammemeter,indicator lamps,MCB,on/offf switch including supply and fixing of DOL starter of complete including overhead charges and contractor's [email protected]% but excluding GST.

Work 2 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007) including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 22.20mm OD pipe -SDR 13.5

Work 2 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR11 and SDR13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007 including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 28.60mm OD pipe -SDR 13.5

Work 2 Providing & placme on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for iniet & outlets and overflow pipes with all fittings inclusing supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet including cost and conveyance of all materials all labour charges etc. complete for finished item including overhead charges and contractor's profit @ 13.615% but excluding GST.

Work 2 upply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make first 10 quality IN.P bib tap indian make 300 g) including cost & conveyance of all materials. labour charges for finished item of work complete for all floors Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Basement.

Work 2 Supplying and Fixing European ISt Water Closet of 1st quality conforming to 15:2556- Part-2-1973 of white glazed with 'P' trap Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 2 Supplying & Fixing Indian makeFlat Back Wash Hand Basinist quality conforming to 15:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm 13 nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard Ci brackets including wooden block: 550 x 400 mm-Double C.P. Pillar cock Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 2 Electrification Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in Roof Slab with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation). Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch Board with earth continuity including wire lleads , earth connections along with all labour charges etc. complete including Over head Charges and Contractors Profit @ 13.615% but excluding GST.

Work 2 Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 2 Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains, Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 3 Completion of incomplete GP office building at Venganayakunipalem, Penuganchiprolu (M) Est.Rs.20.00 lakhs Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST (APSS No. 402) for G.F

Work 3 Painting to New Wood work with two coats of Ready mixed Synthetic Enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, Sales & other taxes , all operational, incidental and labour charges etc.complete for finished item of work (3 Coats) including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 3 Flooring with Nano polished Vitrified floor tiles of size 600x600 mm (8-10mm), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST

Work 3 Providing skirting to internal walls to 15 cm height/risers of steps with Nano polished Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST .

Work 3 Providing amd applying Synthetic Plaster Putty or equivalent putty such as Birla WallCare putty or texture paint or equivalent such as NCL/Saicoat texture paint of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,Sand the surface, clean & wipe off loose dust, applying putty/texture paint filler by putty knife/ muslin pad, air dry for 2-3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational,incidental,labour charges etc. complete for finished item of work for External walls -excluding cost of access scaffolding including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Work 3 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% but Excluding & GST (APSS No. 911) For interior walls

Work 3 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding GST For exterior walls

Work 3 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST

Work 3 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm).Including Overhead charges & Contractor's Profit @13.615% etc.complete Excluding GST.

Work 3 Supply and fixing of Flush Door shutter of size 1.20 x 2.10 mts with block board type with teak veneer on one face and commercial ply on another face 30mm thick (confirming to IS:2202 of Shabdwara ) ,with frame made of well seasoned Sal Wood scantlings of size 100x75mm including cost and coveyance of all materials and labour charges including all furniture and fittings like Z hold fasts, hinges, tower bolts and aldrops etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding GST.

Work 3 Supply and fixing of Flush Door shutter of size 1.05 x 2.10 mts with block board type with teak veneer on one face and commercial ply on another face 30mm thick (confirming to IS:2202 of Shabdwara ) ,with frame made of well seasoned Sal Wood scantlings of size 100x75mm including cost and coveyance of all materials and labour charges , cost and conveyance of all furniture and fittings like Z hold fasts, hinges, tower bolts and aldrops etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding GST.

Work 3 Ornamental plastering with CM (1:5) 8mm thick including cost and conveyance of all materials all labour charges etc., complete including Overhead charges & Contractor's Profit @13.615% Excluding Seigniorage charges & GST.

Work 3 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% Excluding Seigniorage charges & GST

Work 3 Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 3 Construction of Toilet Block Earth Work Excavation for foundations and depositing on bank with an initial lead of 10m including all operational , incidental, labour Charges such as shoring, Sheething, planking, strutting, etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.

Work 3 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but Excluding Seigniorage charges & GST

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Footings.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheadcharges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Pedastals.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheadcharges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Plinth Beams.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Columns.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Roof Beams.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contracto'rs Profit @13.615% but excluding Seigneorage charges and GST.-For 100mm Th.Roof Slab

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overheads and Contractors Profit @13.615% but excluding Seigneorage charges and GST.-For Lintels.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Sunshades.

Work 3 Masonry Work in C.M.(1;6) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for basement

Work 3 Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,hire charges of T&P etc complete for finished item of work including Overheads and Contractors Profit @13.615% but excluding Seigneorage charges and GST.

Work 3 Filling with useful available excavated earth (excluding rock) with alead of 50m in trenches ,sides of foundation with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,hire charges of T&P etc complete for finished item of work including Overheads and Contractors Profit @13.615% but excluding Seigneorage charges and GST.

Work 3 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overheads & Contractors Profit @13.615% but Excluding Seigniorage charges & GST (APSS No. 402) for G.F

Work 3 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead Charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST.

Work 3 Masonry Work in C.M.(1;8) prop with Flyash cement solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead Charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for Superstructure.

Work 3 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 3 Ornamental plastering with CM (1:5) 8mm thick including cost and conveyance of all materials all labour charges etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 3 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractors Profit @13.615% but excluding Seigniorage charges & GST (APSS No. 911) For interior walls

Work 3 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST For exterior walls

Work 3 Flooring with Ceramic tiles , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Work 3 Providing Dadooing to internal walls to 15 cm height/risers of steps with 7.30mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Work 3 Supplying and Fixing Orissa Pan White glazed W.C.1st quality ISI marked confirming to IS2556-Part-3-1981 with' P' or' ' S 'trap 630mmx450mm including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 3 Supplying and Fixing 12.7mm N.P. bib tap Indian make heavy duty Long body including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 3 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007) including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 22.20mm OD pipe -SDR 13.5

Work 3 Supplying and Fixing Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( Cpper Tube Sizes 1/2" ton 2" SDR11 and SDR13.5 pipes are made from identical CPVC Compounds having the same physical properties for Hot and Cold water (IS-15778:2007 including Overhead charges and Contractor's Profit @13.615% but excluding GST' - For 28.60mm OD pipe -SDR 13.5

Work 3 Providing and placing on Terrace (at all floor levels ) Polythylene water storage tank with double layer approved brand and manufacture with cover and suitable looking arrangements and making necessary wholes for inlet and outlet pipes and labour chargs etc. complete including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 3 Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 3 Providing and fixing 28-30mm thick Solid Wood Polymer Composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an overall density of 750 Kg/Cum. It will be required for fixing the door with the frame including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 3 Door Frame Section of 45x75mm . The two Verical members are to be joined together with the horizontal member using 8x50 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/ assembled door frame is fixed to the wall using hold fast or bolt Fasteners.A minimum of 4 Nos of Screws to be provided for each verical member & minimum 2 Nos. for horizontal member including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Work 3 Cost and supply of HYSD bars including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractors profit @13.615% but excluding GST.

Work 3 Construction of Compound wall Earth Work Excavation for foundations and depositing on bank with an initial lead of 10m including all operational , incidental, labour Charges such as shoring, Sheething, planking, strutting, etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.

Work 3 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST (APSS No. 402)-Levelling Course.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Footings.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Pedastals.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Plinth Beams.

Work 3 Supply and placing of the VRCC M.25 Design Mix Concrete corresponding to IS456 using Weigh Batcher/Mixer with 20-10mm size graded machine crushed hard granite metal(coarse aggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate (Sand) ,coarse aggregate,water etc. to site and including all operatrional ,incidental and labour charges such as weigh batching, machine mixing,laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping,centering,shutttering ,laying concrete, vibrating,curing including overhead charges and Contractor's Profit @13.615% but excluding Seigneorage charges and GST.-For Columns.

Work 3 Filling with useful available excavated earth (excluding rock) with alead of 50m in trenches ,sides of foundation with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges,hire charges of T&P etc complete for finished item of work including Overhead charges and Contractors Profit @13.615% but excluding Seigneorage charges and GST.

Work 3 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal fro m approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete including Overheads & Contractors Profit @13.615% but Excluding Seigniorage charges & GST (APSS No. 402) for G.F

Work 3 Masonry Work in C.M.(1;8) prop with Flyash cemrnt solid blocks of size 290x225x140mm for manufacturing of flyash solid blocks using flyash of 80 Kgs, cement of 15 Kgs and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc. complete with a compressive strenth not less than 50 Kg/Sqm including Overhead Charges and Contractor's Profit @13.615% but excluding seigneorage charges and GST.for walls for Super structure.

Work 3 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure including Overhead charges & Contractor's Profit @13.615% excluding Seigniorage charges & GST

Work 3 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST- For exterior walls

Work 3 Cost and supply of MS Grills including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 3 Cost and supply of HYSD bars including cost and conveyance to work spot and Fabrication charges of steel like cutting rods, welding grills ,placing in position etc. complete including Overhead charges and Contractor's profit @13.615% but excluding GST.

Work 3 Electrification Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Wall with all required accessories including masonary work and labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi ., complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supplying & run of 2 of 4 Sqmm 56/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in 1) on modular cover frame including earth connection and all labour charges etc., complete on wall. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch Board with earth continuity including wire lleads , earth connections along with all labour charges etc. complete including Over head Charges and Contractors Profit @ 13.615% but excluding GST.

Work 3 Supply of Mini Modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.ELEC-3.8.16 complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 3 Supply and Erecting, ISI mark submersible 1.0 H.P. ,Single Phase 18 stages pumpset suitable for 106/156 mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, Pump coupling and pivot of Single Phase 250V,50HZ, A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc, with necessary H- type clamp of Suitable size and strength including Overhead Charges and Contractors Profit @13.615% but excluding GST.

Work 3 Supply and fixing SPN Distribution board with IP-43 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete. complete for finished item of work Including Overheads & Contractors Profit @13.615% etc.complete but excluding GST

Work 4 Construction of compound wall and improvements to Sthree Shakthi Building at Penuganchiprolu (V&M) Est.Rs.40.00 lakhs Earth work excavation in Basement and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 4 Reinforced cement concrete M25 Design Mix in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 4 Filling with sand in trenches, sides of foundation and basement with intial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Flooring with 15 to 18mm thick polished Kadapa slabs set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing skirting to internal walls to 15 cm height/risers of steps with Polished Kadapa slabs length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Supply and fixing of Flush Door shutter of size 1.05 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face 30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges etc.complete as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Interior Walls.

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Exterior Walls.

Work 4 Construction of New Toilet Block Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc. complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Pedastals.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Plinth Beams.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding seigniorage charges & GST -For Roof Beams.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For 100mm thick Roof slab.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels.

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete . for finished item of wor including oover head charges and Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades.

Work 4 Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Basement.

Work 4 Filling with sand in trenches, sides of foundation and basement with intial lead in laers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310) Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,complete for fnished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Cost and supply of HYSD bars including cost and conveyance of work spot and fabrication charges of steel like cutting rods, tying grills placing in position including cost of binding wire etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Superstructure Walls

Work 4 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure Including Overhead charges & Contractor's Profit @ 13.615%but excllding seigniorage charges & GST

Work 4 Ornamental Plastering with CM (1:5)8mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work .(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST-For interior walls

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For exterior walls

Work 4 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete , etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007). Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and Fixing of Premium make CPVC Pipes andFittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Providing and placing on terrace(at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangements and making necessary wholes for inlet and outlet pipes and labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Construction of Store Room in FF Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof beam

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractors Profit @ 13.615% etc.complete but excluding seigniorage charges & GST- For 115mm thick Roof slab

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST-For Sunshade

Work 4 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Lintels

Work 4 Cost and supply of HYSD bars( Fe.500-D) including fabrication charges of steel like cutting rods, tying grills placing in position including cost of binding wire etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 4 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 4 Ornamental Plastering with CM (1:5) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 4 Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but exlcuding seigniorage charges & GST

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 911) Including Overhead charges & Contracto'rs Profit @ 13.615% but exculding GST- For exterior walls

Work 4 Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Construction of Compound wall Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charge SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST

Work 4 Sand Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST

Work 4 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST

Work 4 Supply and placing of the (VRCC) M25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site on all materials , all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- for Column Footings

Work 4 Supply and placing of the (VRCC) M25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% e but excluding seigniorage charges & GST.- For Pedastals

Work 4 Supply and placing of the (VRCC) M25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Work 4 Supply and placing of the (VRCC) M25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% e but excluding seigniorage charges & GST - For Plinth Beams

Work 4 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 4 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 4 Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, amnd labour charges such as cutting, bending,placing in position, tying Etc. including overhead charges and contractor's profit @13.615% but excluding GST.

Work 4 Electrification Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation). Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Work 4 Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.ELEC-3.8.16 Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply of 900 mm (36") / 1200 mm (48") / 1400 mm (56") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 4 Supply and erecting Stepped type regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Work 4 Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Const.of compound wall & kitchen to community hall at Konakanchi village, Penuganchiprolu (M) Est.Rs.40.00 lakhs - Construction of New Kitchen shed Earth work excavation in Basement and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Pedastals.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Plinth Beams.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding seigniorage charges & GST -For Roof Beams.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For 125mm thick Roof slab.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete . for finished item of wor including oover head charges and Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades.

Work 5 Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Basement.

Work 5 Filling with sand in trenches, sides of foundation and basement with intial lead in laers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310) Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,complete for fnished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, amnd labour charges such as cutting, bending,placing in position, tying Etc. including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 5 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Ornamental Plastering with CM (1:5) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Interior walls

Work 5 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 911) Including Overhead charges & Contracto'rs Profit @ 13.615% but exculding GST- For exterior walls

Work 5 Flooring with 100 mm thick CC (1:6:10) mix using 40mm HG metal,100mm thick and 20mm cement concrete surface(Ellies pattern , first sort) per 10Sqm of area including all labour charges etc., complete including Overhead charges and contractors profit @13.615% but excluding seigneorage charges & GST.

Work 5 Flooring with40mm mm thick Rough Cuddapah/ Shabad stones set over base coat of CM (1:8)12mm thick over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work including over head charges and contractor's profit @ 13.615% , but excluding seigniorage charges & GST.

Work 5 Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) including over head charges and contractor's profit @ 13.615% , but excluding seigniorage charges & GS

Work 5 Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Construction of New Toilet Block Earth work excavation in Basement and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Pedastals.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Plinth Beams.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding seigniorage charges & GST -For Roof Beams.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For 100mm thick Roof slab.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Lintels.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete . for finished item of wor including oover head charges and Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades.

Work 5 Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Basement.

Work 5 Filling with sand in trenches, sides of foundation and basement with intial lead in laers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310) Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,complete for fnished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, amnd labour charges such as cutting, bending,placing in position, tying Etc. including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 5 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Ornamental Plastering with CM (1:5) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Interior walls

Work 5 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 911) Including Overhead charges & Contracto'rs Profit @ 13.615% but exculding GST- For exterior walls

Work 5 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete , etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007). Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST -22.20mm OD Pipe - SDR13.5

Work 5 Supply and Fixing of Premium make CPVC Pipes andFittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST -28.60mm OD Pipe-SDR13.5

Work 5 S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Providing and placing on terrace(at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangements and making necessary wholes for inlet and outlet pipes and labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Construction of New Compound wall Earth work excavation in Basement and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Footings.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST - For Pedastals.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Plinth Beams.

Work 5 Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHERIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns.

Work 5 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc.,complete for fnished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Work 5 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure Walls

Work 5 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Work 5 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work (APSS No. 911) Including Overhead charges & Contracto'rs Profit @ 13.615% but exculding GST- For exterior walls

Work 5 Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, amnd labour charges such as cutting, bending,placing in position, tying Etc. including overhead charges and contractor's profit @13.615% but excluding GST.

Work 5 Electrification Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in Roof Slab with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation). Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Work 5 Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.ELEC-3.8.16 Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply of 900 mm (36") / 1200 mm (48") / 1400 mm (56") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 5 Supply and erecting Stepped type regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Work 5 Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Work 6 Completion of incomplete community hall in (Shadikana) at Vatsavai (V&M) Est.Rs.50.00 lakhs Ground Floor Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Work 6 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Work 6 Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Basement

Work 6 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls

Work 6 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for RACKS & PLATFORMS.

Work 6 Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Work 6 Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Work 6 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work

Work 6 Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete excluding seigniorage charges for finished item of work (APSS No.701 & 707)

Work 6 Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overheads & Cotractors Profit @13.615%etc. complete as per specifications (APSS NO.1001 & 1002)

Work 6 Supply and fixing of Flush Door shutter of size 0.9 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overheads & Cotractors Profit @13.615%etc. complete as per specifications (APSS NO.1001 & 1002)

Work 6 Supply and fixing of Flush Door shutter of size 1.20 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overheads & Cotractors Profit @13.615%etc. complete as per specifications (APSS NO.1001 & 1002)

Work 6 Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Work 6 Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC „C‟ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the „C‟ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer‟s specification & drawing for finished item of work .

Work 6 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Work 6 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls

Work 6 Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for External walls - excluding cost of access scaffolding

Work 6 Painting to New wood work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors

Work 6 Supply andfixing of 110mmdia ( 4 Kg/Scm) ISI MarkPVCRain water spouts of 2.5mm thick including cost of necessary PVC Bends,shoes and MS Clamps and all other accessories and fixing in position including cost andconveyance of all materials to site all operational incidental and laboaur charges such as fixing in alignment including contractors profit and over heads etc complete but excluding VAT for finisehd item of work.

Work 6 Construction of Toilets Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Work 6 Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Pedestals

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beams

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for COLUMNS

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for ROOF BEAMS

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for 125mm thick Roof Slab

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for LINTELS

Work 6 Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., tosite and including sales & othr taxes on all materials includign all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excludign cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department includign pumping, centering, shuttering, laying concrete, vibrating, curing Including Overheads & Cotractors Profit @13.615/100etc., complete but excluding cost of steel and its fabrication charges for finished item of work for SUNSHADE

Work 6 Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Basement

Work 6 Filling with sand in trenches, sides of foundation and basement with intial lead in laers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310).

Work 6 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310)

Work 6 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Work 6 Cost and supply of HYSD bars including cost and conveyance of work spot and fabrication charges fo steel like cutting rods, tying grills placing in position including cost of binding wire etc., complete.

Work 6 Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Work 6 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls

Work 6 Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm

Work 6 OrnamentalPlastering with CM (1:5)8mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm

Work 6 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls

Work 6 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Work 6 Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work.

Work 6 Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete excluding seigniorage charges for finished item of work (APSS No.701 & 707), including all charges

Work 6 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm . Including Labour charges only Fixing Orissa pan W.C with"P" or "S" trap, including all charges

Work 6 Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice, including all charges

Work 6 Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock, including all charges

Work 6 Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm, including all charges

Work 6 Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame, including all charges

Work 6 Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member, including all charges

Work 6 Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) for 22.20mm ODPipe - SDR 13.5 , including all charges

Work 6 Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) for 28.60mm ODPipe - SDR 13.5, including all charges

Work 6 S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body including all charges

Work 6 Providing and placing on terrace(at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangements and making necessary wholes for inlet and outlet pipes and labour charges etc., complete including all charges

Work 6 Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete, including all charges

Work 6 Construction of Compound wall Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Work 6 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Work 6 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Footings

Work 6 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Pedestals

Work 6 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Plinth Beams

Work 6 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For COLUMNS

Work 6 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310)

Work 6 Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:6:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Work 6 Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls

Work 6 Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:4), 8mm thick and top coat in CM (1:2), 4mm thick with sponze finishing, including all charges

Work 6 Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Work 6 Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete., including all charges

Work 6 Cost and supply of HYSD bars including cost and conveyance of work spot and fabrication charges fo steel like cutting rods, tying grills placing in position including cost of binding wire etc., complete., including all charges

Work 6 Electrification Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.

Work 6 Supply and Fixing of 25mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.

Work 6 Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Work 6 Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation).

Work 6 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Work 6 Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Work 6 Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Work 6 Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Work 6 Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on modular cover frame including earth connection and all labour charges etc., complete on wall.

Work 6 Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Work 6 Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.ELEC-3.8.16, including all charges

Work 6 Supply of 900 mm (36") / 1200 mm (48") / 1400 mm (56") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories, including all charges

Work 6 Supply and erecting Stepped type regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board, including all charges

Work 6 Supply and fixing SPN Distribution board with IP-30 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete, including all charges

Work 6 Supply and erecting, ISI mark submersible 1.0 HP,Single Phase 18stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength, including all charges

Work 6 Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Work 6 Water supplyDrilling of 165mm dia borewell with power rig and clearing of all stratas remaining the bore well and inserting 180mm dia PVC 6kg/Sq.cm as casing pipe upto hard strata as recommended by the Geologist and flushing of borewell and cleaning of all starts, including all charges

Work 6 Cost and Supply and fixing of Casing pipe 180mm dia PVC 6Kg/sq.cm inclduong cost and conveyance of all materials and all labour charges etc., completed

Work 6 Supply & Fixing of 180 mm dia PVC Bore Cap , including all charges

Work 6 Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II.Makes:DURA LINE (Dura Guard) or its equivalent make. ELEC-4.3.1, including all charges

Work 6 Supply of 3 Core 2.5 sq Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/Goldmedal/GM, including all charges

Work 6 Supply and Fixing of CPVC Pipe (22.20mm OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound, including all charges

Work 6 Supply and Fixing of CPVC Pipe (28.60 mm OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound, including all charges

Work 6 Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet including coat and conveyance of all materials all labour charges etc. complete for finished item of work but excluding GST.

Work 6 Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make first quality ( N.P bib tap indian make 300 g ) including cost & conveyance of all materials, labour charges for finished item of work complete for all floors

Work 6 Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap, , including all charges

Work 6 Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm, including all charges

Work 6 CC road Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per Technical Specification Clause 305.4.3 MORTH, including overhead charges & Contractors profit but excluding GST, seigniorage charges

Work 6 Construction of sub grade using suitable local selected soil aggregate spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC and compaction with three wheel 80 -100 KN static roller capacity to achieve the desired density complete as per (Table 2.3 of IRC SP 77-2008) specificaions Including Overheads & Contractors Profit but excluding GST & Seigniorage charges

Work 6 Construction of granular sub-base by providing well graded material with Grading- III material (HBG M/C + Stone dust) CBR value not less than 20 and PI value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller to achieve the desired density, complete as per Technical Specification Clause 401 MORDIncluding Overheads & Contractors Profit but excluding GST & Seigniorage charges

Work 6 Construction of un-reinforced, without dowel joint description, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction joints, applying primer, sealant, dowel bars, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including Overheads & Contractors Profit but excluding Seigniorage charges

Work 6 Consatruction of shoulders with local selected material including cost and conveyance of all materials and labour charges etc.