PROVN OF PARKING SHED AND ADDN ALTN OF RUNWAY CONTROLLER HUT AND DOG KENNEL AT AF STN NALIYA

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified & directed.

Excavating in trenches not exceeding 1.5 meters wise and not exceeding 1.5 meters deep and getting out in any type of soil complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C -2 (by using 40mm graded crushed broken stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe plain cement concrete 1:3:6 type C-2 (by using 40mm graded crushed broken stone aggregates) complete all as specified and directed.

M&L for Precast cement concrete type C-1, 1:5:8 (by using 20mm graded crushed broken stone aggregate) solid block masonry exceeding 10cm in width and setting in mortar 1:6 complete all as specified & directed.

S&F SGSW drain pipes grade 'A' 150 mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

M&L for Precast cement concrete 1:3:6 type B-1 (by using 20mm graded crushed broken stone aggregates) as in coping, benching channel to manholes etc complete all as specified & directed.

M&L for Precast cement concrete 1:2:4 type B-1 (by using 20mm graded crushed broken stone aggregate) as in manhole cover slabs and set in CM 1:4 complete all as specified & directed.

M&L for MS TMT (Thermo mechanically treated) steel bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping to columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel CRS bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in any type of soil complete all as specified and directed.

Removing excavated materials (soil) to a distance exceeding 250 metres but not exceeding 500 meters and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified & directed.

M&L for RCC hume pipe septic tank for 10 users on site design to carry sewage and sludge and sullage water, excavtaion in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc. Complete all as specifed and dircted.

Taking down cement plaster of any description including raking out joints, hacking for key scrubbing down with water etc. complete all as specified & directed.

Demolition of cement concrete unreinforced as in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L PCC (1:4:8) type D-2(by using 40mm graded crushed broken stone aggregate) as in foundation filling in mass concrete complete all as specified & directed.

M&L 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces lf wall and finished even and smooth without using extra cement complete all as specified & directed.

M&L for 10mm thick cement plaster in CM (1:4) mixed with two layers of each and top layer shall be mixed with WPC as per manufactureres instructions and finished even and fair without using extra cement on walls. Note: WPC shall be paid & measured separately in respective item of Sch of works/BOQ

Supply only water proofing compound

M&L for rendering 5mm thick cement plster in CM (1:3) on ceiling and finished even and smooth witout extra cement complete all as specified & directed.

M&L for complete removal of old existing treatment including, washing rubbing down and stopping of existing painting surfaces and appying two coats of oil distember over a coat of 3mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered surfaces of walls etc & applying two coats of white wash a coat of 3mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified & directed.

S&F of 15mm dia steel tube, medum grade, galvanised with all fitting and fixed complete to walls and ceiling etc including cutting of wall and match the existing surface (concealed) complete all as specified & directed.

S&F of 20mm dia steel tube, medum grade, galvanised with all fitting and fixed complete to walls and ceiling etc including cutting of wall and match the existing surface (concealed) complete all as specified & directed.

S&F 110mm dia PVC (SWR) plain bend (any radius ) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint, fixed to walls complete all as specified & directed.

S&F 110mm dia PVC (SWR) bend (any radius) with access doors complete all as specified and directed.

S&F 110mm dia PVC (SWR) 'T' with equal or un-equal offsets complete all as specified & directed.

S&F of 85mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.

S&F 15mm bore bib taps, cast copper alloy with chroomium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F 15mm bore dia stop valves cast copper alloy with chromium plated, fancy type with long shank and cup concealed type screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repair 15mm dia pillar taps,cast copper alloy with capstan heads, chroomium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with lon screwed shanks and fly nuts, fancy type screwed for iron pipecomplete all as specified & directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) overflow pipes for flushing cistern incl jointing to socket or flushing rim and connecting pie to union of flushing cistern complete all as specified.

S&F in repairs, 10 litre capacity PVC valveless, syphonic eaction type, flushing cistern, low level, white with inlet, ball valve, float and handle incl brackets and waste pipe complete all as specified & directed.

S&F in repair Vitreous china wash hand basin, white size 580 x 450mm size (Oval type) incl cutting for and pinning in ends of brackets or erecting stand incl brackets incl fixing of flush pipe complete all as specified & directed.

S&F of 32mm dia waste coupling of PTMT (half or full thread) minimum weight 45gm to 60gm complete all as specified & directed.

S&F grating doom 100mm dia of PTMT (minimum weight 25gm) complete all as specified & directed.

S&F towel rail of 60mm long of PTMT fix with and including chromium plated brass screw and wooden/ plastic plate (minimum weight 190gm) complete all as specified & directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opening as per specification and drawing etc complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be coered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading sued inside stiles and rails and decorative PVC beading of 10m x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and complete all as specified & directed.

S&F 100mm long, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S&F 200mm long aluminium, anodised barrel tower bolt of extruded section and fixed complete all as specified & directed.

S&F aluminium anodised window and ventilator shutter, sliding type without sash bar, aluminum section of weigh in 0.55 Kg/ m including necessary jointing cleat glazing clips rubber packing, handles 2 nos each door, hinges, aluminium anodised snap beading complete all as specified & directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for 5.5mm thick glass panes to aluminium frame work after taking out old serviceable galss of any description from old wooden or metal frames complete all as specified & directed.

M&L for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choic lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen covered complete all as specified & directed.

M&L For Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint on new steel surface over a cat of red oxide incle preparation of surface of any description over 10 cm width or girth complete all as specified & directed.

S&F anodised aluminium snap grid frame work for false ceiling complete all as specified & directed.

M&L for 12 mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified.

S&F controllers desk ATC Console -high profile for working stations with minimum of one year guarantee complete all as specified & directed. Make: TEQZO retail products private limited or equivalent model & make of durain / godrej or approved by GE.

S&F wooden wall mounted folding beds of size 165CM X 60 CM with teak wood and teak boardply with 10CM thick cusion mattress of premium quality complete all as specified with minimum of one year guarantee complete all as specified & directed. Make: The wood home or equivalent model and make of durain / godrej or approved by GE.

S&F wall mounted corner shelves of aluminium premium quality of rust proof complete all as specified & directed. Make: Indian décor or equivalent model and make as approved by GE.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10mm thick backing of CM 1:4 complete all as specified & directed.

M&L for glazed coloured ceramic tiles 350x250x7mm thick in dado and skirting etc. set and jointed in neat cement slurry and pointed to match including 10mm thick backing of CM 1:4 complete all as specified & directed.

S&F form work to roof slab, floor slab, and similar work for fair finished surface complete all as specified & directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, complete all as specified and directed.

M&L RCC 1:3/2:3 type A-1 (by using 20mm graded crushed broken stone aggregate) in columns, beam, pillars, piers, lintel, bressummers, posts and struts complete all as specified & directed.

M&L RCC 1:3/2:3 type A1 (by using 20mm graded crushed broken stone aggregate) in roof slab, chullah hoods, chajjas, troughs and similar work complete all as specified & directed.

M&L for hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified & directed.

M&L for moorum filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammped including watering complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (by using 40mm graded crushed broken stone aggregate) for plinth protection finished even and smooth with out using extra cement complete all as specified & directed.

M&L for 75 mm thick cement concrete type C-2, 1:4:8 (by using 40 mm graded crushed broken stone aggregate) as in sub base complete all as specified & directed.

M&L for 100 mm thick Cement concrete type B-2 1:2:4 (by using 40 mm graded crushed broken stone aggregate) as in floor finishes complete all as specified & directed.

M&L in repair for factory made machine pressed precast conctete rubber moulded interlocking paver block With grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified & directed.

M&L for sand cushioning under floors as in foundations including watering and consolidation complete all as specified & directed.

M&L for 6 mm thick double tinted sheet glass panes premium quality including cutting and fixing in aluminium frames for sound proofing effect complete all as specified.

S&F 500 Ltr Rotational moulded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as specified and directed.

S&F window roller blinds with modern design, mattle finished, vertical shape, fabric polyster material of customized size fixed in position including all fittings all as specified and directed.

M&L for PCC (1:2:4) type B-1 (by using 20mm graded crushed broken stone aggregate) as in benching channels including form work as required and forming moulds complete all as specified & directed.

S&F GI pipe medium grade 80 mm bore and embeded in concrete as fixed in posts complete all as specified & directed.

S&F steel work in tubular trusses incl special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St. 240 complete all as specified & directed.

S&F MS Plate 6mm thick plain, cut to shape forming holes and welded to truss and verticle post all as required complete all as specified & directed.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and length exc 5cm an n exc 10cm complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile self tapping screws as manufacturers instructions / recommendations complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 Type B-2 (by using 40mm graded crushed broken stone aggregate) finished even and smooth without using extra cement as in floor finishing complete all as specified & directed.

M&L for formwork to sides and soffits of concrete foundations, footings, base of columns, raft and raft beams, plinth beams and similar work vertical or to batter complete all as specified & directed.

M&L for formwork to sides of pillars, posts struts, piers, column and stanchions complete all as specified & directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified & directed.

M&L for formwork to sides and soffits of suspended slabs, such as roof slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) complete all as specified & directed.

M&L for formwork to edges of concrete exceeding 10cm but not exceeding 20cm wide for fair finished surface complete all as specified & directed.

M&L RCC 1:3/2:3 type A1 (by using 20mm graded crushed broken stone aggregate) as in slabs supported on walls beam and columns in floors, roofs, landing, deck slabs, shelves and similar work complete all as specified & directed.

M&L 40mm thick PCC (1:2:4) type B-1 (by using 20mm graded crushed broken stone aggregate) complete all as specified & directed.

M&L for vitrified tile 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36sqm, in floor etc set and jointed in neat cement slury and pointed in white or coloured cement to match including screed bed or bedding layer 15cm thick in cement mortar1:6 on floors for laying floor finish complete all specified & directed.

Description all as Srl item No. 89.00 here-in-before but on vertical surface with 10mm thick rendering in cm 1:4 complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of OBD over a coat of primer complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of camoufage painting with exterior emulsion paint over a coat of primer complete all as specified & directed.

S&F in position anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, partly glazed with 5.5 mm thick tinted glass and partly panelled with 9 mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150 mm size and tower bolt 200 mm size, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, Mortice lock vertical type of mild steel 4 levers of size 100mm etc all as mentioned here in below, complete and as directed :- (a) Frame (top & side) section-101.60 x 44.75 x 2.4 mm (Section No 14021) (b) Vertical Members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section - 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section -150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass - 0.80 mm thick (Section No 19370). Note: Section No. given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. (Make of aluminium section: Jindal/INDAL/ Hindalco)

S&F powder coated aluminium, three track sliding window frame of section size 92.00x31.75x1.3mm comprising of one No. of fly proof shutter and two Nos. of glazed shutter frames of section size 40x18x1.3mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and as directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/ wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples. (iii) Glass filling in panels of glazed shutter shall be 4.0mm thick tinted sheet glass of approved make and shade/ tint.

S&F anodised aluminium grill made out of 7mmx4.5mm wide flat, square, ractangular or similar section, fixed with channel of size 38mmx12mmx13mm (Section 8778) complete all as specified and as directed, Make:- DECO GRILL No. DG 102 with aperture - 80mm or equivalent make as approved by GE.

M&L 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified & directed.

S&F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete all as specified & directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F 140mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L Water proofing treatment on roof etc, comprising with the following operation & as specified here in below :- (a) M&L for 40mm thick PCC 1:2:4 type B-0 (by using 12.5mm graded crushed broken stone aggregate) laid on roof in adequate slope complete all as specified & directed. (b) M&L for 15mm thick plaster in cement mortar 1:3 finished even smooth without using extra cement complete all as specified & directed. (c) M&L for preparing & cleaning of fully dried cement plastered surface and applying one coat of cold bituminous primer to the plastered surface @ 1.50 Kg per sqm conforming to IS 3384-1986 complete all as specified & directed. (d) A layer of APP modified water proofing membrane with non woven polyster reinforcement/mat not less than 3 mm thick weight ont less than 3.5 Kg per Sqm over a coat of bituminous filler/primer as specified above confirming to IS 3384-1986 through approved applicator all as per manufacturer's instructions complete as specified & directed. NOTE: Application of polymeric membrane shall be applied by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction.

M&L for machine cut kota stone slab in patch work 20-25mm thick over cement screed bed 15mm thick in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match with the shade of slab including grinding polishing single piece of stone slab on steps shall be provided complete all as specified & directed.

M&L for point wiring with 1.5 Sqmm, FRLS, single core, PVC insulated, unsheathed, 1100 Volts grade with multistranded copper conductor drawn through PVC conduit concealed in the wall with all accessories fixed to wall/ floor/ ceiling etc. and including provision of 1.5 Sqmm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including fabricated steel terminal box made out of 1.6mm thick MS sheet concealed in the wall with 3mm thick laminated sheet tope cover for mounting the switches, socket outlets, fan regulators etc. complete all as specified and as directed for following:- One light/ fan point controlled by one, one way switch.

One switch socket 3pin outlet 5amp on independent board

Description all as Srl item No. 104.10 here-in-before but with 2.5sqmm single core PVC insulated cable 1100V grade with multistranded copper conductor and including provn of 2.5sqmm PVC insulated, multistranded copper conductor as earth continuity conductor connected to common earth for 15 amp independent board complete all as specified & directed.

S&F switch piano flush type single pole one 5amp complete all as specified & directed.

S&F ceiling rose three terminal, PVC/ Polycarbonate, isolated body, complete as specified and as directed.

S&F switch socket combination 2 in 1, multipurpose, 3 pin, 5/ 15 Amps, flush type, controlled by one switch complete all as specified and as directed.

S&F switch socket combination 2 in 1, 5Amps, flush type complete all as specified and as directed.

S&F vertical type DB cat part No. NVMCCF04 of make indoasian or equivalent model & make of Legrand/Havells/Bajaj/CG or as approved by GE, provn for FP MCCB 32 Amp, 25KA (v-tech) N3 frame upto 200amp 4 ways, IP 43 protection, shrouded neutral bar & pan assembly with flexible connecting link in the wall with suitable nut and bolt including matching the existing surface complete all specified & directed.

S&F MCB DB, SPN, 8 ways double door with 240 Volt, 200 Amps rated bus bar with all accessories fixed in the wall including making good the disturbed surface to match with the existing surface complete all as specified and as directed.

S&F MCB, single pole and neutral 6 to 32 Amps, 240 Volts, complete all as specified and as directed.

S&F MCB, single pole 6 to 32 Amps, 240 Volts, complete all as specified and as directed.

S&F LED street light fiitng 10W IP 65

S&F LED tube light alongwith fixture 18W

S&F in replacement of fan regulator, flush type, on the existing phenolic laminated sheet etc. as per requirement complete all as specified and as directed.

S&F ceiling fan BEE 5 star 1200mm sweep, 230V complete with all accessories.

M&L in replacement for sub main wiring with two runs of single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS), drawn through and including PVC conduit concealed in the wall and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke (FRLS) as earth wire including taking down old unserviceable sub main wiring of any size with capping & casing/ conduit with all accessories complete all as specified and as directed. Note:- Two runs of main cable and one run earth wire with conduit will be measured as one RM for payment.

M&L for earthing complete with galvanized GI earth plate electrode of size 600mmx600mmx6mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and galvanized iron or steel, charcoal salt 15cm around the earth plate as shown in electrical plate No. 3 of SSR part-I, 20mm dia watering pipe medium grade 1.50 mtr long, GI protection pipe light grade 15mm dia from earth pit to main board including earthwork and excavation in any type of soil, refilling earth and removal of surplus soil upto 50 mtrs, PCC (1:3:6) type CI chamber, precast RCC cover 40mm thick, reinforced with 6mm dia MS bar 3 Nos. both way with handle made out of 6 mm dia MS bar and testing etc complete all as specified and as directed. Note:- (i) Length of GI protection pipe and earth lead wire shall not be less than 7.5 mtrs. (ii) On completeion, the earth resistance test to be carried out. If desired value of resistance not obtained, the earthing will be re-done at no extra cost.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ionser and plasma filter for better indoor air quality of capacity 2TR complete all specified & directed.

Supply and install electronic wall mounting type voltage stablizer suitable for AC upto 2TR for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with output voltage stablized at 230 volts with accuracy of (+/-) 2.5% and of capacity 5 KVA complete.

M&L earthing complete with copper earth plate electrode of size 600mmx600mmx3.15mm thick, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to copper lead strip 20x3mm by means of bolts, nuts, check nuts and galvanized iron or steel, charcoal salt 15cm around the earth plate as shown in electrical plate No. 3 of SSR part-I connected to earthing test point complete all as specified and as directed. Note:- (i) On completeion, the earth resistance test to be carried out. If desired value of resistance not obtained, the earthing will be re-done at no extra cost.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3Nos 8mm dia 25mm long hexagonal head screw complete all as specified & directed.

S&F single pointed air termination copper rod 12mm dia, 300mm long complete all as specified & directed.

S&F GI pipe 1.5RM long medium grade vertically fixed by means of PCC 1:2:4 of size 2x2x1.5 cubic feet for mounting of copper air termination rod complete all specified & directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases pr burried in ground or drawn in conduit/pipe or fixed poles or any other indicated situation for loop earthing etc. as required 20 x 3mm copper strip complete all specified & directed.

Vijay Construction Co

Krishna Engineering