REPAIR/MAINT OF STREET/SECURITY LIGHTS, PERIPHERY LIGHTS, POST TOP LANTERNS, HIGH MASTS LIGHTS, GARDEN LIGHTS AND REPAIR/MAINTENANCE OF DG SETS AT INS DEGA UNDER AGE E/M NO- II OF GE (U-I) VISAKHAPATNAM

Amount

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft and loose soil complete all as specified and directed.

Returning and filling in of excavated material any type including spreading,levelling,watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Removal of surplus excavated material of any type not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for Sand cushioning/sand covering for underground cable protection complete all as specified. Note: Punned thickness only will be measured and paid.

Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for GI pipe light grade 50 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge . Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash

Supply and fix in replacement Electronic Timer suitable for street light timer panel/DG AMF panel/ Star Delta Starter panel complete all as specified and directed by Engineer-in-Charge .. Make: L&T / Indoasian /GE /BCH.

Taking down defective street light fitting of any size, type and capacity from height of pole / walls / high mast of any location exceeding 7.0 m height for repair work and re-fixing back after repair work is carried out including checking, inspecting, testing and commmissioning complete all as directed by Engr-in-Charge. Note: (a) The M/L for Items like ballast, lamp, igniters, capacitors, electronic drivers,surge protection devices etc shall be measured and paid separately under relevant items. (b) Necessary tools like ladders & other T&P required shall be arranged by the Contractor. (c) The rate quoted deemed to be inclusive for minor parts nut bolts, circle clips, clamps etc if any required at site. (d) The M/L for repairs to LED panel is not included in the scope and shall be measured and paid separately.

Taking down defective street light fitting of any size, type and capacity from height of pole / walls / high mast of any location not exceeding 5.0 m height for repair work and re-fixing back after repair work is carried out including checking, inspecting, testing and commmissioning complete all as directed by Engr-in-Charge. Note: (a) The M/L for Items like ballast, lamp, igniters, capacitors, electronic drivers,surge protection devices etc shall be measured and paid separately under relevant items. (b) Necessary tools like ladders & other T&P required shall be arranged by the Contractor. (c) The rate quoted deemed to be inclusive for minor parts nut bolts, circle clips, clamps etc if any required at site. (d) The M/L for repairs to LED panel is not included in the scope and shall be measured and paid separately.

Supply only the following spares suitable for street light/flood light/post top lantern light fittings of Make: Havells / Bajaj / Philips / CG / GE

Ballast MH 400 W

MH lamps single end/double end 400 W

Igniters for 150 W to 400 W MH fittings

Screw type holders/ side holders for 150 w to 400 w MH fitting

SV/MH lamps 150 w single end/double end

Ballast SV/MH 150 W

63 A rated four pole connector heavy duty

Electronic driver suitable for 120 to 150 W LED light fitting

Electronic driver suitable for 90 to 100 W LED light fitting

Electronic driver suitable for 70 to 80 W LED light fitting

Surge protection device of capacity 10 KV suitable for LED light fitting

Dismantling LED light fitting of of Make: GE/Havells/CG/ Goldwyn/Bajaj /Philips /Surya of capacity 120 to 150 W ,strip opening the elctronic driver, LED panel complete, identifying defective LEDs , replacement of defective LEDs complete including soldering, replacement of pitted control wiring from LED panel to driver etc complete, including testing and commissioning complete. ( Note : The rate quoted is not inclusive of taking down and refixing of street light fittings and shall be measured and paid separately under relevant schedule items)

Dismantling LED light fitting of of Make: GE/Havells/CG/ Goldwyn/Bajaj /Philips /Surya of capacity 90 to 100 W ,strip opening the elctronic driver, LED panel complete, identifying defective LEDs , replacement of defective LEDs complete including soldering, replacement of pitted control wiring from LED panel to driver etc complete, including testing and commissioning complete. ( Note : The rate quoted is not inclusive of taking down and refixing of street light fittings and shall be measured and paid separately under relevant schedule items)

Dismantling LED light fitting of of Make: GE/Havells/CG/ Goldwyn/Bajaj /Philips /Surya of capacity 70 to 80 W ,strip opening the elctronic driver, LED panel complete, identifying defective LEDs , replacement of defective LEDs complete including soldering, replacement of pitted control wiring from LED panel to driver etc complete, including testing and commissioning complete. ( Note : The rate quoted is not inclusive of taking down and refixing of street light fittings and shall be measured and paid separately under relevant schedule items )

Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 8500 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. (Make: ENDURAPEARLMAGNUMSL 100WLED757PASYTOTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). Note: The GI pipe bracket if required will be measured and paid separately under relevant items

Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. (Make: ENDURAPEARLMAGNUMSL 110WLED757PASYTOTG of Havells or or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items

Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 12000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. (Make: ENDURAPEARLMAGNUMSL 120WLED757PASYTOTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE). Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items

Dismantling old unserviceable flood light fittings from any position exceeding 7.5 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc including necessary angle iron supports , clamps etc complete and testing on completion all as specified and as directed (Make: JETAIRISFLS 100WLED757ASYMLTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE).

Dismantling old un-serviceable flood light fittings from any position exceeding 7.5 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 12000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc incl necessary, angle iron supports , clamps etc complete and testing on completion all as specified and as directed. (Make: JETAIRISFLS 120WLED757ASYMLTG of Havells or equivalent in Philips/Bajaj/Wipro/GE/CG as approoved by GE).

Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 40 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as specified & directed. (Make: LPTO-40-CDL of CG or equivalent in Philips /Bajaj /Wipro /GE /Havells as approoved by GE). Note: The GI pipe if required will be measured and paid separately under relevant schedule items

Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 60 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as directed & specified. (Make: LPTO-60-CDL of CG or equivalent in Philips /Bajaj /Wipro /GE /Havells as approoved by GE). Note: The GI pipe if required will be measured and paid separately under relevant schedule items

Supply & lay or fixing or passing through pipe or in cable ducts, 1100 volts grade, XLPE insulated, armoured, electric power cables (heavy duty) with aluminium conductor of the following sizes including taking down old one complete all as specified and as directed. ( MAKE: Havells / Gloster Cables / CCI )

25 Sqmm 3.5 Core

16 Sqmm 4 core

10 Sqmm 4 core

Supply and erection, testing and commissioning of Hot dip galvanised octagonal pole of 7.5 m height, top dia 70 mm bottom dia 135 mm, Base plate 225mm x 225 mm x 16 mm, foundation bolt M20 x 700 - 04 Nos complete with single arm GI bracket of suitable size and including built in connecter control box with locking arrangement along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box and flexible 3 core 1.5 Sqmm copper connecting cable from control box to fitting all as directed including dismantling old one complete all as specified and directed. ( Make: C&N / Utkarsh / GE or Equivalent ). NOTE :- The rate quoted shall include the following : (i) The required RCC foundation shall be designed as per manufacturers instructions considering safe bearing capacity of soil as 10 t/m2 which shall be got approved by GE before execution of work.. (ii) Necessary Earth work, RCC M-20 shallow foundation, reinforcement steel as per design, foundation bolts manufactured with special steel along with nuts, washers, anchor plates & templates complete set etc. (iii) Erection and commissioning of the octagonal pole with the help of suitable T & P.

S&F in repair PVC insulated 3 core 1.5 Sq mm stranded copper conductor cable for connecting junction box to street light fitting testing and commissioning all as directed. ( Make: Plaza/ Gloster/Polycab/Havells ).

Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings complete all as directed.

Supply and fixing timelite distribution boards (street light DBs) 65 A 3 pole with 230 V Astronomical time switch complete all as directed including dismantling old one . Make: Indo Asian/ HPL/Havells

S&F loop-in/loop-out box of internal size (Approx) 200x160x98 mm made out of FRP(Hot moulded type) with weather proof canopy and locking screws along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box, duly fixed to to steel tubular pole using 25 x 3mm FI clamp, including suitable gland and lugs for connecting cable complete all as directed. (Make :- Sintex / Hansu or equivalent ).

M&L for bracket of street light fitting made out of 40 mm bore GI pipe light grade bent to shape required, not less than 1.20 m long, fixed with and including MS flat iron clamps made out of 40 x 6 mm FI, bolts, nuts, washers etc complete including dismantling old one complete all as specified and directed. ( Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash )

M&L for preparation of old painted steel surfaces of 9 m long steel poles including removing oily/greasy spots and applying one coat of aluminium paint complete including applying a coat of white wash on pole coping and lettering the pole details with 125 mm dia adhesive sticker with white letters on blackground etc complete all as directed

M&L for preparation of old painted steel surfaces of 5 m long steel poles including removing oily/greasy spots and applying one coat of aluminium paint complete including applying a coat of white wash on pole coping and lettering the pole details with 125 mm dia adhesive sticker with white letters on blackground etc complete all as directed

M&L for fixing in repair adhesive sticker radium type red coloured water resistant of approx 2 inches width around the circumference of pole at a approx height of two meters all as directed.

Outsourcing of services for operation & maintenance of DG set of 160 KVA of Make: Ashok Leylaynd at Tower No 7 including repairs with all consumables and minor spare parts (not major spares /assemblies) and periodical maintenance of diesel engine driven generating sets through "A" checks in two shifts of 08 hours each per day including Sundays and holidays all as specified and directed by Engineer-in-Charge.

(i) One skilled electrician/operator in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 31.00 (i) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 31.00 (i) (a) to (d) .

(f) Overhead and profit on Sl item no. 31.00 (i) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

Outsourcing of services for operation & maintenance of DG sets of 100 KVA DG set of Make: Ashok Lelaynd at Tower No 11 and 30 KVA DG set of Make: Ashok Lelaynd at North Gate including repairs with all consumables and minor spare parts (not major spares /assemblies) and periodical maintenance of diesel engine driven generating sets through "A" checks in two shifts of 08 hours each per day including Sundays and holidays all as specified and directed by Engineer-in-Charge

(i) One skilled electrician/operator in each shift Note : (i) Bidder has to quote the following mandatory provisions related to wages and misc benefits for workmen which includes all Taxes, cess, levis as applicable including GST. (ii) In case the rates quoted are less than the prevailing rates / instructions under any heading(s), the bid will be treated as non-bonafide / invalid which shall be disqualified and such bids will not be considered for acceptance (iii) Payment for item nos. 32.00 (i) (a) to (f) will be done after submission of valid & authentic documents in support of proof of payment as mentioned in tender documents.

(a) Wage.

(b) Employer's Contribution towards Employees Provident Fund (EPF) .

(c) Employer's Contribution towards Employees State Insurance Corporation (ESIC ).

(d) Bonus in terms of "The Code on Wages-2019"

(e) Labour Welfare Cess (LWC) on Sl item no. 32.00 (i) (a) to (d) .

(f) Overhead and profit on Sl item no. 32.00 (i) (a) to (e) . [Quotations with ‘Nil’ or ‘Zero’ consideration (overhead and profit) shall be considered as “non bonafide bid”].

NOTE for item No. 31.00 & 32.00 : The rate shall also include the following: (a) Two unit shall run at a time and one as standby in AC Plants and maintaining desired temparature. (b) Cleaning of plant sarrounding area and plant room daily. (c) Maintaining the logsheet and registers. (d) (i) HSD oil required for running DG Set will be issued under Schedule ‘B’ free for filling which will be made available at site by Department. (ii) It is the contractor’s responsibility to maintain the minimum reserve of oil in tank at any time and as directed by EIC. (iii) Necessary Men power required to load the HSD oil at Store yard and to unload the HSD Oil at site shall be arranged by contractor and the rate quoted shall include for the same. [e] Cost of consumable stores such as grease, lubricants, cotton waste, and other connected stores and tools etc. required for daily operation and routine maintenance. [f] Charging of batteries and putting acid and distilled water whenver required for smooth running of genset.

M&L for Alternators warm up, cleaning the dust with dry blow air, megger the insulation values , measure the load / no load excitation voltages before & after maintenance and record the values of following DG set all as dircted by Engr-in-Charge :-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M&L for dismantling the upper & lower tank of radiator and replace the copper radiator core pipe including testing and painting complete all as specified and directed for the following capacities :-

(a) 320 KVA DG set

(b) 160/200/250 KVA DG set

(c) 100/125 KVA DG set

(d) 62.5/63 KVA DG set

(e) 30/40 KVA DG set

M&L for De-scaling of radiator by dismantling the upper & lower tank and cleaning the core pipes with cleaning chemicals (radi wash), components and arrest the leaking core by brazing/ dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, refixing the same including testing and painting complete all as specified and directed for the following capacities :-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M&L for preparation of old painted steel surfaces of following capacity DG sets including alternator, radiator support channels complete, connected equipments complete and painting with two coats of approved colour synthetic enamel paint complete all as directed. Note:-1. Painting should be done with existing colour codes and painting should apply with the help of spary gun using air compressor. 2. Quotated rate shall deemed to be included for preparation of old painted surface by twinkering and applying zinc chrome primer over twinkered/rusted portion all as directed.

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

Cleaning of diesel tank of any capacity carefully by draining out fuel in the tank including disconnection from fuel system, descaling the diesel tank with water pressure and removing the complete sludge deposited, drying the tank, repair to any leakage, cleaning and testing of fuel line upto Fuel Pump inlet all as directed for the following capacities :-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M&L for fixing of View Glass with beading in canopy all as dircted by Engineer-in-Charge of following capacity:-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M&L for Replacement of complete water hose pipe set including clips,nuts, bolts and washers etc of the DG Set all as specified and dircted by Engr-in-Charge of following capacity:-

(a) 320 KVA DG set

(b) 160/200/250 KVA DG set

(c) 100/125 KVA DG set

(d) 62.5/63 KVA DG set

(e) 30/40 KVA DG set

M & L for replacement of complete fuel and lub oil hose pipe set with clamp / clip etc of the following capacity of DG sets:-

(a) 320 KVA DG set

(b) 160/200/250 KVA DG set

(c) 100/125 KVA DG set

(d) 62.5/63 KVA DG set

(e) 30/40 KVA DG set

M&L for replacement of herness wiring complete all as directed for the following capacity of DG sets:-

(a) 320 KVA DG set

(b) 160/200/250 KVA DG set

(c) 100/125 KVA DG set

(d) 62.5/63 KVA DG set

(e) 30/40 KVA DG set

M&L for pump & injectors calibration of the DG Set all as specified and dircted by Engr-in-Charge of following capacity:-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M&L for fixing of PVC covered iron mesh at fresh air inlet to avoid entry of snakes , lizards etc.all as dircted by Engr-in-Charge of following capacity:-

(a) 320 KVA DG set

(b) 250 KVA DG set

(c) 160/200 KVA DG set

(d) 100/125 KVA DG set

(e) 62.5/63 KVA DG set

(f) 30/40 KVA DG set

M & L for replacement of battery lead set of 2 Nos 1.5 mtr long copper lead of 35 Sqmm size including GM terminals at one end and coper lug at other end all as directed

M&L for repair and servicing of self starters including replacement / rewinding of armature, carbon brush set with holder, king pin holder, check nut, body screens, clutch plate assembly and solenoid switch etc all as directed for the following capacity of DG sets:-

(a) 320 KVA DG set

(b) 160/200/250 KVA DG set

(c) 100/125 KVA DG set

(d) 62.5/63 KVA DG set

(e) 30/40 KVA DG set

Supply and toping up of engine oil 15W40 or as per manufacturers recommendations for topping up or replacement as directed. Make: Castrol/Servo/HPCL

Supply and toping up of radiator coolents as per the recommendation of engine manufacturer all as directed.

M&L for carrying out 'B' check for DG set 320 KVA, as per manufacturer's recommendation including replacement of fuel filters,air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: Greaves Cotton

M&L for carrying out 'B' check for DG set 200/250 KVA, as per manufacturer's recommendation including replacement of fuel filters, air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: Greaves Cotton/Ashok Leyland

M&L for carrying out 'B' check for DG set 160 KVA, as per manufacturer's recommendation including replacement of fuel filters,air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: CUMMINS

M&L for carrying out 'B' check for DG set 100/125 KVA, as per manufacturer's recommendation including replacement of fuel filters,air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: CUMMINS

M&L for carrying out 'B' check for DG set 63 KVA, as per manufacturer's recommendation including replacement of fuel filters,air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: Kirloskar/ CUMMINS

M&L for carrying out 'B' check for DG set 30/40 KVA, as per manufacturer's recommendation including replacement of fuel filters,air filters and oil filters, 'O' rings, engine oil, gasket, coolant etc complete. Make of Engine: Kirloskar/ CUMMINS

Disconnecting and removing existing unserviceable battery and S&F maintenance free battery 12V 100 AH with minimum 2 years warranty including terminal clamps, copper lead of suitable length including testing and commissioning all as specified and as directed by Engineer-in-Charge. [Make: Exide/ Amron/ Tata Green]

Disconnecting and removing existing unserviceable battery and S&F maintenance free battery 12V 180 AH with minimum 2 years warranty including terminal clamps, copper lead of suitable length including testing and commissioning all as specified and as directed by Engineer-in-Charge. [Make: Exide/ Amron/ Tata Green]

Checking complete wiring for AMF panel and identifying fault in the safety and control system wiring from AMF panel to engine control gadgets like HWT LLOP, and shut down valve, dynamo self-starter etc for 250/320 KVA DG set engine and rectifying fault in the AMF system including replacement of EC-2 Relay,suitable capacity of contactor, burnt control wiring cable with thimbles and ferrules, blown out fuses for proper fuctioning and testing the DG set complete all as directed.

Checking complete wiring for AMF panel and identifying fault in the safety and control system wiring from AMF panel to engine control gadgets like HWT LLOP, and shut down valve, dynamo self-starter etc for 160/200 KVA DG set engine and rectifying fault in the AMF system including replacement of EC-2 Relay, suitable capacity of contactor,burnt control wiring cable with thimbles and ferrules, blown out fuses for proper fuctioning and testing the DG set complete all as directed

Checking complete wiring for AMF panel and identifying fault in the safety and control system wiring from AMF panel to engine control gadgets like HWT LLOP, and shut down valve, dynamo self-starter etc for up to 125 KVA DG set engine and rectifying fault in the AMF system including replacement of suitable capacity of contactor, burnt control wiring cable with thimbles and ferrules, blown out fuses for proper fuctioning and testing the DG set complete all as directed

GS ENGINEERS

AYYAPPA CONSTRUCTIONS

POWERTECH ENGINEERING SERVICES