Construction of New Rythu Bazar at Bobbili opp RTC Complex under AMC, Bobbili in Vizianagaram District.

Removal of debries of use the material a lead of 2.00 km including loading of all materials and labour chargers etc., complete for finished item of work.

Dismantling Old Brick Masonry walls and Clearing a way the materials and stacking the carefull useful for reuse including all labour chargers etc., complete for finished item of work.

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary Soil-Manual Means-Upto 3M depth.

Filling with HBG Stone Chips 2.36mm and below in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of HBG Stone Chips 2.36mm and below excluding seigniorage charges for finished item of work or as directed by the Engineer-in-Charge.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work.

Filling of foundations with Gravel from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

Vibrated Reinforced Cement Concrete M20 Nominal mix equivalent to (1:2:4) using 20mm size (SS5) hard blasted granite machine crushed graded metal from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Foundations, Plinth, Pedastals Below Plinth.

For Pedestals upto GL

For Plinth Beam

For Sum Shades 0.60 Mts width

For Roof Slab (125mm Thick)

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of Steel bars from approved sources to site of work, binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastages like Overlaps, couplings, chairs, spacer bars etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes on all materials complete for finished item of work.

ReFilling with useful available excavated earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Brick Masonry in superstructure with CM (1:6) prop: using traditional second class bricks of sixe 23x11x7cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

For Superstructure

Vibrated Cement Concrete M20 Nominal mix equivalent to (1:2:4) proportion (cement: fine aggregate: Coarse aggregate) using 66.67% of 40mm HBG metal and 33.33% of 20mm HBG (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Ceiling Plastering with C.M (1:3) 12 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, seigniorage charges of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Superstructure

Supply and fixing doors as per drawings with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters solid bond wood black board type with commercial play of both places 30 mm thick conforming to IS 002 hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2100mm).

Colour washing in two coats over primary coat of white wash to out side faces (External walls) inlcuding basement, including cost and conveyance of all materials and all labour such as scaffolding, lift charges etc., complete for finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in built roller track and sashextruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriated imension of uPVC extruded glazingbeads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (ifrequired), EPDMgasket, woolpile, zincalloy (white powder coated) handle ononeside of extreme panel along with zincplated mild steel multi pointlockinghaving transmission gear with keeps, zinc alloy (white powdercoated) touchlock with hook (if required for wire meshpanel), stainless steel (SS 304 grade)body with adjustable double nylonrollers (weight bearing capacity tobe120kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profileof frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware sand drainage of water etc. After fixing frame the gap between frame and adjacent finished walls hallbefilled with weather proof silicon sealentover backer rod of requiredsize and ofapproved quality, all complete as perapproveddrawing& directionof Engineer-in-Charge inclusive of cost of Single/doublegl asspanes, wire meshand silicon sealent. Two track two panels sliding window made of (big series)frame 67 x 50 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension.(Area of window above 2.50 sqm upto 4.00sqm.)

Painting to New Wood Work with two coats of Synthetic Enamel Paint of superior quality of approved brand and shade over a base coat of Wood primer ( 3 coats) in all to give an even shade after thoroughly brushing the surface to remove all loose materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.

Supply and fixing of 16mm dia holding down bolts 1 No's of 0.45mtr length including cost and conveyance of all materials and labour charges for fabrication charges etc, including 3” threading at exposed.

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame ofthe size 50x47 mm with awall thickness of 5mm, made out of extruded10 mm rigid PVC foam sheet, mitre cutat two corners and joined with 2nos. of150mm long brackets of 15x15mm M.S.square tube.The two vertical door profil esaretobere in forced with 19x19mm M.S.S quare tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S.Screw s through the frame by using PVC fasteners.Aminimum of 4nos. of screw s to be provided for each vertical member & minimum 2nos. for horizontal member etc.complete.

Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing.

Supply & fixing of MS Rafters 49.50x 49.50 x 2.90 mm thick per Rmt 4.07 kgs /1 Rmt a length of 3.60 mts length per rmt 4.07 kgs /1 rmt a length of 3.60 mts and purlins supports 50x50x5mm thick 0.05 mts length and 8 mm thick plates of size 0.23 x0.23 m (2nos.) purlins 62.80 kgs including fabrication and fixing of all materials and all labour charges complete for finished item of work.

Supply & fixing of MS purlins 49.50x49.50x2.90 per Rmt 4.07 kgs including fabrication and fixing of all materials and all labour charges complete for finished item of work.

Roofing with 0.50mm thick galvanized / pre painted G.I profiled sheets fixed to the purlins with 14 size self drillin with neoprene washer side laps are stiched wirh self tapping drilling screws. End laps are to be sealed with 25X3 mm Butyl tape the sheets are provided with anti capillary groove including cost and labour charges etc., complete as per standard specification for finished item of work.

Painting two coats with synthetic enamel paint first grade to new iron work including one coat of red oxide paint for New Iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work.

Cost and supply of MS gate of size 3.00 X1.50 (2 Nos) of allround frame 49.50 X49.50 X 2.90 mm thick for RMT 4.07 Kgs and internal nos 38 X38 X 3.20 mm thick for RMT 3.29 Kgs including fabriocation and fixing of all material and all laobour charges complete for finished item of work.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approvedbrand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outletsand over flow pipes but without fittings & base support fortanks.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556 - Part -2- 1973 of white glazed with 'S'trap including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity with internal components including Cost & Conveyance of all materials and all labour chareges etc., complete for finished item of work.

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Cost, Supply & Fixing of 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent 28.60mm OD Pipe (SDR 13.5) CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete.

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent 22.80 0mm OD Pipe (SDR 13.5) CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete.

Supply and fixing of 110 mm PVC/SWR pipe - 4 Kg/sq.cm pipe of 1828.8 mm (4'-0") Single Socket etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work.

Cost, Supply & Fixing of 110 mm dia - Single Tee Bend with Door - UPVC/SWR Pipe fittings Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Cost, Supply & Fixing of 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm - Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Cost, Supply & Fixing of 75 mm dia - 45 Degree bend - UPVC/SWR Pipe fittings Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Cost, Supply & Fixing of 75 mm Tee bend - 4 Kg/sq.cm - Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Drilling of 180 mm dia bore well with DTH power rig clear in all strate remaing bore to suit insertion of 180 mm PVC casing pipe and other relevant materials required upto the depths directed by the department transportation of the drilling rigs and support including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Cost, Supply & Fixing of 180mm dia 6Kg/Sqcm capacity PVC casing pipe into drilled bore well including all labou8r cahrges and all taxes, etc., complete for finished item of work as per directions of the engineer in charge.

Cost, Supply & Fixing of 140mm dia (6") 6Kg/Sqcm capacity PVC casing pipe into drilled bore well including all labou8r cahrges and all taxes, etc., complete for finished item of work as per directions of the engineer in charge table no 20.

Labour charges for sloting of pipes including all labour cahrges and sloting as per the directions of the department officers etc., complete.

Supply and Transportation of 1.00 HP 15 Stage single phase ISI submersible motor pumpset for Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi.

Fabrication, transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes: LT / LK / BCH / Crompton/ Siemens at the site.

Supply and fixing of MS clampset including cost and conveyance of all materials and all labour charges complete for finished item of work.

Supply and fixing of PVC bore cap suitable for 180mm dia PVC pipe used for bore well. The rate is exclusive of all taxes.

Manufacture, supply, & delivery of 40mm dia 10Kg/sqcm HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M.) table no 16(1).

Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) As per IS:9537 part III concealed in wall with all required accessories including masonary work and labour charges etc.,.of makes Sudhakar / Maco plast / Modi. Complete.

ELEC-1.6.3.a Supply of 3 Core1.5 Sqmm. Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / Polycab / Havells / KEI/Gloster.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : As per list of recommended brands as category I including cost and conveyance of all materials and all labour charges complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Fan point as per standard data.

Supply and fixing of 6A ISI mark Flush type switch with 6A 3/2 pin wall plug socket on a common switch board with earth connections in CONSEALED wiring including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/Anchor.

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completecopper cable Makes: Finolex / RR kabel / Havells /KEI.

Supply and fixing of moduar stepped type electronic regulator with cover frame on existing board of make Legrand Arteor / MK blenge / Scheider Zen Celo.

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands. without regulator of makes Crompton / Bajaj / Usha 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.