Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC WZ 02 PLOT NO 05 GROUND FLOOR PUNJAB MARKET VISHNU GARDEN NEW DELHI PIN 110018 | WEST DELHI | DELHI | 110018 | L1 | Accepted-AOC LOWEST BID | |
| 2 | L2₹23.1 L+₹1.8 L (8.50%)Rejected-Finance | L2 | Rejected-Finance HIGHER BID | |
| 3 | L3₹24.7 L+₹3.4 L (16.0%)Rejected-Finance 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L3 | Rejected-Finance HIGHER BID | |
| 4 | L4₹24.9 L+₹3.6 L (17.1%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L4 | Rejected-Finance HIGHER BID |
| Sl No | Description | Qty | Unit | JOY ENTERPRISE L2 | Techno India Enterprises L1 | M/s Bombay Novelty Stores L4 | Pratik Enterprise L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | CHARPOY GI PIPE PLY TOP (DRG NO. FD-220) M&L for removing of old unservicable plywood top and S&F in replacment the new plywood of charpoy GI Pipe (FD-220) with 12mm thick commercial BWR (07 No of Ply) size as per drg with 10 nos nuts, bolts and washers (3 Nos on each long rail & 2nos on each short rail) bolt head counter sunk machine made size 75mmx5mm with 2 nos nuts & washers on each bolt complete after repairing of the charpoy GI Pipe, steel flat iron & leg protection shall be painted with two coat of white colour synthetic enamel paint including prepartion all as shown on drawing complete all as specified and directed. | 720 | Nos | 1,720 ₹12,38,400 | 1,629 ₹11,72,880 Lowest | 1,800 ₹12,96,000 | 1,790 ₹12,88,800 |
| 2.00 | CHARPOY IP HARD TOP MAP (DRG NO. FD-MAP-II/01) Removing the Old UNSV Plywood Top from charpoy MS tubing and S&F new plywood top of 12mm thick BWR grade IS-303 commecial type of approved make complete all as per Drg and Specification complete all as specified and directed. | 210 | Nos | 1,720 ₹3,61,200 | 1,629 ₹3,42,090 Lowest | 1,800 ₹3,78,000 | 1,790 ₹3,75,900 |
| 2.01 | Preparation of Existing Steel Surfaces of furniture by filling cavaties with necessary putty to achieve glossy surface by spray machine with two coats of black paint of approve make with quoted rates includes removing of dents/corrected deshaped to the normal position to charpoy IP hard Top complete steel frame complete all as specified and directed. | 210 | Nos | 135 ₹28,350 | 180 ₹37,800 | 110 ₹23,100 Lowest | 170 ₹35,700 |
| 3.00 | LOCKER STEEL (DRG NO. FD-1029) Locker bed side Steel Preparation existing old Steel Surfaces of Locker bed side Steel, filling Cavaties with necessary putty to achieve smooth Surface and applying two coat of Synthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed. | 600 | Nos | 445 ₹2,67,000 | 450 ₹2,70,000 | 440 ₹2,64,000 Lowest | 540 ₹3,24,000 |
| 3.01 | M & L for removing UNSV handle from locker bed side steel and S&F stainless steel chromium plated handle 100mm of approved quality 2 Nos each as shown on drg complete all as specified and directed. | 600 | Nos | 98 ₹58,800 | 54 ₹32,400 Lowest | 147 ₹88,200 | 105 ₹63,000 |
| 3.02 | M & L for removing UNSV hasp and staple from locker bed side steel and S&F new Aluminium hasp and staple 100mm with appropriate screws as shown on drg complete all as specified and directed. | 600 | Nos | 65 ₹39,000 | 45 ₹27,000 Lowest | 88 ₹52,800 | 48 ₹28,800 |
| 3.03 | M & L for removing UNSV hanging rod from locker bed side steel and S & F CP Hanging rod 19mm dia 1.6 mm thick as approved and shown on drg complete all as specified and directed. | 900 | Nos | 94 ₹84,600 | 54 ₹48,600 Lowest | 135 ₹1,21,500 | 110 ₹99,000 |
| 4.00 | ALMIRAH LARGE STEEL W/s (DRG NO. FD-1031) M & L for removing UNSV lock from almirah Large steel w/s and S& F new lock 6 lever brass Make: Godrej/Link of approved make and shown on drg complete all as specified and directed. | 300 | Nos | 240 ₹72,000 | 198 ₹59,400 Lowest | 300 ₹90,000 | 280 ₹84,000 |
| 4.01 | M & L for removing UNSV handle from almirah large steel w/s and S&F of new handle of chromium plated mild steel and shown on drg complete all as specified and directed. | 300 | Nos | 49 ₹14,700 Lowest | 54 ₹16,200 | 194 ₹58,200 | 52 ₹15,600 |
| 4.02 | Almirah Large Steel w/s: Preparation of existing old Steel Surfaces of Almirah Large Steel with shelves, filling Cavaties with necessary putty to achieve smooth surface and applying two coat of Synthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed. | 241 | Nos | 600 ₹1,44,600 | 504 ₹1,21,464 | 495 ₹1,19,295 Lowest | 635 ₹1,53,035 |
Tender Value
₹24.7 L
EMD Value
₹49,380
Closing Date
6 Jun 2025, 6:00 pmClosed
GE ARMY BHUJ
BHUJ
REPAIRS RECANNING AND PAINTING AND CERTAIN OTHER MISC MAINTENANCE WORKS OF STEEL FURNITURE AT MIL STN BHUJ AND GANDHIDHAM UNDER GE ARMY BHUJ
2025_MES_707641_1
8319
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BHUJ
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE ARMY BHUJ
₹49,380
Yes
9 Sept 2025
10 May 2025
9 Jun 2025
10 May 2025
6 Jun 2025
23 May 2025
Amount
CHARPOY GI PIPE PLY TOP (DRG NO. FD-220) M&L for removing of old unservicable plywood top and S&F in replacment the new plywood of charpoy GI Pipe (FD-220) with 12mm thick commercial BWR (07 No of Ply) size as per drg with 10 nos nuts, bolts and washers (3 Nos on each long rail & 2nos on each short rail) bolt head counter sunk machine made size 75mmx5mm with 2 nos nuts & washers on each bolt complete after repairing of the charpoy GI Pipe, steel flat iron & leg protection shall be painted with two coat of white colour synthetic enamel paint including prepartion all as shown on drawing complete all as specified and directed.
CHARPOY IP HARD TOP MAP (DRG NO. FD-MAP-II/01) Removing the Old UNSV Plywood Top from charpoy MS tubing and S&F new plywood top of 12mm thick BWR grade IS-303 commecial type of approved make complete all as per Drg and Specification complete all as specified and directed.
Preparation of Existing Steel Surfaces of furniture by filling cavaties with necessary putty to achieve glossy surface by spray machine with two coats of black paint of approve make with quoted rates includes removing of dents/corrected deshaped to the normal position to charpoy IP hard Top complete steel frame complete all as specified and directed.
LOCKER STEEL (DRG NO. FD-1029) Locker bed side Steel Preparation existing old Steel Surfaces of Locker bed side Steel, filling Cavaties with necessary putty to achieve smooth Surface and applying two coat of Synthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed.
M & L for removing UNSV handle from locker bed side steel and S&F stainless steel chromium plated handle 100mm of approved quality 2 Nos each as shown on drg complete all as specified and directed.
M & L for removing UNSV hasp and staple from locker bed side steel and S&F new Aluminium hasp and staple 100mm with appropriate screws as shown on drg complete all as specified and directed.
M & L for removing UNSV hanging rod from locker bed side steel and S & F CP Hanging rod 19mm dia 1.6 mm thick as approved and shown on drg complete all as specified and directed.
ALMIRAH LARGE STEEL W/s (DRG NO. FD-1031) M & L for removing UNSV lock from almirah Large steel w/s and S& F new lock 6 lever brass Make: Godrej/Link of approved make and shown on drg complete all as specified and directed.
M & L for removing UNSV handle from almirah large steel w/s and S&F of new handle of chromium plated mild steel and shown on drg complete all as specified and directed.
Almirah Large Steel w/s: Preparation of existing old Steel Surfaces of Almirah Large Steel with shelves, filling Cavaties with necessary putty to achieve smooth surface and applying two coat of Synthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position complete all as specified and directed.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
JOY ENTERPRISE (BID ID -3308796)
Pratik Enterprise (BID ID -3313342)
M/s Bombay Novelty Stores (BID ID -3311835)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .