MISCELLANEOUS ELECTRICAL WORKS IN PULPMILL AT TNPL UNIT- II

8330400372 Cable laying work: Laying of L.T. Power/ control cables-for laying, dressing and clamping of cables-in racks, trays in concrete shafts/underground (excluding excavation & back filling)-upto 2.5 sqmm

8337500745 LAYING OF CABLE SIZE ABOVE 2.5 & UP TO 16 SQ MM

8337500746 LAYING OF CABLE SIZE 35 SQ MM

8337500747 LAYING OF CABLE SIZE 70 SQ MM

8337500748 LAYING OF CABLE SIZE ABOVE 70 & UP TO 185 SQ MM

8337500749 LAYING OF CABLE SIZE 240 SQ MM

8337500750 LAYING OF CABLE SIZE 300 SQ MM

8337500519 Cable laying armoured up to 8 core signal / digital cable (0.5 sqmm to 1.5 sqmm)

8337500520 Cable laying armoured up to 10 - 24 core signal / digital cable (0.5 sqmm to 1.5 sqmm)

8337500423 Removing of the following cable sizes from racks/ trays in concrete trenches/overhead trays/ vertical shafts/undergrounds - upto 2.5 sq.mm

8337500739 REMOVING OF CABLE SIZEABOVE 2.5 & UP TO 16 SQ MM

8337500740 REMOVING OF CABLE SIZE 35 SQ MM

8337500741 REMOVING OF CABLE SIZE 70 SQ MM

8337500742 REMOVING OF CABLE SIZE ABOVE 70 & UP TO 185 SQ MM

8337500743 REMOVING OF CABLE SIZE 240 SQ MM

8337500744 REMOVING OF CABLE SIZE 300 SQ MM

8337500400 Termination of LT cable / straight through joint after laying upto 2.5 sq.mm

8337500752 Cable termination 2.5 sq mm & up to 16 sq mm

8337500753 Cable termination of 35 sq mm

8337500754 Cable termination of 70 sq mm

8337500755 Cable termination above70 sq mm & up to 185 sq mm

8337500756 Cable termination of 240 sq mm

8337500757 Cable termination of 300 sq mm

8337500721 Removing of Electrical scrap

8337501546 Installation / Removing of 1x40w / 1x20W Indusrial Integeral LED Tube Light fitting

8337501540 Installation / Removing of 40W Ultra Slim LED Light Fitting(2ftx2ft)

8337501539 Installation / Removing of 40W LED WELL Industrial WELL Glass fitting

8337501538 Installation / Removing of 70w Insdustrial Integeral LED Street Light Fitting at elevation maximum of 20mtr

8337501537 Installation / Removing of 150W Industrial Integeral LED High Bay light fitting at elevation maximjm of 30mtr

8337501536 Installation / Removing of LED medium Bay fittings 85W at elevation of maximum 30mtr

8337501531 Installation / Removing of 45W LED Flame proof well glass fittings at elevation of 10mtr

8337501530 Installation / Removing of 80W LED Medium bay fittins (flame proof) at elevation of 20mtr

8337501529 Installation / Removing of 75Watts flame proof led street light fittings at elevation of maximum 30mtr

8337501535 Installationof SLDB (400mmW x 260mm Height x 200mm Depth) of DP Incoming and 12ways of outgoings (metal enclosed) inclusive of fabrication and fixing of baseframe and painting of frame

8337501534 Installationof Metal enclosed 7segment LDB (1020mm width x 710mm height x 120mm Depth) inclusive of fabrication and fixing of baseframe and painting of frame

8337501533 Installation of PVC 4 ways junction box (96mmx96mm) with wall or Structure

8337501532 Installation of Flame proof Lighting Junction box (130mm Dia) with wall or structure

8337500387 Wiring in Industrial area: Wiring of armoured/ power cable in conduit from switch board to individual light/fan etc including installation of switch board and fitting for the following along with earth wire-Single/Twin tube light fitting

8337500388 Wiring in Industrial area: Wiring of armoured/power cable in conduit from switch board to individual light/fan etc including installation of switch board and fitting for the following along with earth wire - Fan with regulator / exhaust fan

8337500390 Wiring in Industrial area: Wiring of armoured/ power cable in conduit from switch board to individual light/fan etc including installation of switch board &fitting for the following along with earth wire - Electrical appliances upto 1.5KW

8337500406 Wiring in Industrial area: Wiring of armoured/ power cable in conduit from switch board to individual light/fan etc including installation of switch board and fitting for the following along with earth wire - Single phase power socket

8337501547 Open wiring (the scope includes supply of all wiring accessories Using 4Sq.mm PVC wire along with earth earth wire length of each point shall be maximum 10mtrs

8337501548 Open wiring (the scope includes supply of all wiring accessories Using 2.5Sq.mm PVC wire along with earth earth wire length of each point shall be maximum 10mtrs

8337501549 Open wiring (the scope includes supply of all wiring accessories Using 1.5Sq.mm PVC wire along with earth earth wire length of each point shall be maximum 10mtrs

8337501525 Supply and Fixing of 300w capacity solid sate electronic fan regulater and mounting the same in the switch control box including giving connections as required (For celing fan and chandlier)

8337501524 Fixing of Ceiling fan / exhaust fan at maximum of 7mtr with inclusive of fixing down rod,Anchor bolts, necessary supporting arragments etc

8337500397 Fixing of pull chord switch (Fabrication, fixing angles, welding & fixing the switch)

8337500398 Fixing of pull chord rope hook (Fabrication of hooks & welding)

8335200079 Laying of pull chord rope

8337500399 Fixing of 63 Amps power plug unit (Fabrication, fixing frames, welding and fixing the switch)

8337501521 Fixing of single power socket for A/C, Power appliances with inclusive of baseframe fabrication and fixing

8337500418 Painting of Motors - cleaning the surface, applying one coat of redoxide paint followed by 2 coats of smoke grey paint (supply of paint shall be in the scope of TNPL). Use of thinner for any exigency - shall not exceed 3% upto 10 KW

8337500419 Painting of Motors - cleaning the surface, applying one coat of redoxide paint followed by 2 coats of smoke grey paint (supply of paint shall be scope of TNPL). Use of thinner for any exigency - shall not exceed 3% abv 10 Kw&upto 30 KW

8337500420 Painting of Motors - cleaning the surface, applying one coat of redoxide paint followed by 2 coats of smoke grey paint (supply of paint shall be scope of TNPL). Use of thinner for any exigency - shall not exceed 3% abv 30 Kw&upto 75 KW

8337500422 Excavation and back filling of cable trench upto a depth of 600mm including removal of old sand and bricks, relaying the same or providing inverted V shaped concrete coverings supplied by TNPL wherever applicable.

8337500431 Cable Trays, Supports, Frames and Misc. Steel Fabrication Works: Cable removal/fixing/ replacement of push button stations and/or canopy for the same.

8337500433 Earthing Systems: Installation of equipment grounding system for indoor and outdoor equipment like motors, panels, MCCs, light fittings, DBs, Transformer, Generators etc and trays and grounding of structures,- Earthing using 50x6 GI/copper

8337500434 Earthing Systems: Installation of equipment grounding system for indoor and outdoor equipment like motors, panels, MCCs, light fittings, DBs, Transformer, Generators etc and trays and grounding of structures,- Earthing using 25x3 GI/copper

8337501522 Complete Earthing system - Excavation, earth pit 10feet electrode installation, Back filling by char coal, clay & salt, Connecting with grid, construction of Earth pit champer, providing earth pit marking, providing earth pit top cover,

8337500430 Cable Trays, Supports, Frames and Misc. Steel Fabrication Works:Fabrication and erection of MS cable trays, supports, frame and Misc.Steel fabrication work including one anti-rust coat of primer, two finished coats of approved enaml paint

8337501516 Fixing of 6M Polycarbonate switch box, with inclusive of supplying swicth box with 2nos 5A Switch and 2nos of 5A socket (2+2)

8337501517 Fixing of 8M Polycarbonate switchbox, with inclusive of supplying swicth box with 06nos 5A switch and 1no 5A socket (6+1)

8337501518 Fixing of 10M Polycarbonate switchbox, with inclusive of supplying swicth box with 1no 16A switch and socket, 1no 5A switch & socket (1P+1)

8337501519 Fixing of 12M Polycarbonate switchbox, with inclusive of supplying swicth box with 10nos 5A switch and 1no 5A socket (10+1)

8337501520 Fixing of 12M Polycarbonate switch box, with inclusive of supplying swicth box with 4nos 5A Switch and 4nos of 5A socket (4+4)

8337501541 Fabrication and erection 50mm/75mm GI Perforated Cable tray including painting, L bend, T bend, Vertical bend fabrication.

8337501542 Fabrication and erection 150mm GI Perforated Cable tray including painting, L bend, T bend, Vertical bend fabrication.

8337501543 Fabrication and erection 300mm Ladder Cable tray including painting, L bend, T bend, Vertical bend fabrication.

8337501527 Fixing of M8 Anchor Fastener [including supply]

8337501526 Fixing of M10 Anchor Fastener [including supply]

8240200010 FIXING OF M12 ANCHOR FASTENER BOLT

8337500720 CABLE TRENCH CLEANING

8337501525 Supply and Fixing of 300w capacity solid sate electronic fan regulater and mounting the same in the switch control box including giving connections as required (For celing fan and chandlier)

Please Enable Macros to View BoQ information