Supply and Delivery of 2No's 40HP Centrifugal Horizontal End Suction of Pump Sets with FASD Starters and Gate Valves, Swing Check Valve (NRV) at Water Supply Boosters in Circle-3 area. 1st Call General Funds

Supply and delivery of Kirloskar or approved make Centrifugal Horizontal End suction of pump model DB65/20Xe (80X65) of flow 2400LPM or 144m3/hr @52m head CI impeller Gland pack pump coupled make motor mounted on a common base frame.complete as directed by departmental authorities.

Supply of 125A ISI marked 4 Pole Change Over Switch on Load withopen Execution as per IS:13947 Makes: Socomec / Lauritz Knudsen (formerly L&T) /HPL / Havells/ C&S/Legrand/ABB complete as directed by departmental authorities

Fixing of 125A 415V FP Off load Change over Switch including conveyance charges incliding lugs and termination etc., complete as directed by the departmental authorities.

Supply of 4 core, 16 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million/Sudhakar/Orbit/Batra Henlay.

Supply and Transportation of 0.5HP(25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB complete as directed by departmental authorities

Supply and Transportation of 1.0HP (25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB complete as directed by departmental authorities

Supply and Fixing of MUG30 FASD Starter of L&T make for 25HP mono Block Motor including conveyance charges etc., complete as directed by the departmental authorities.

Supply and Erection of control panel board with suitable size with following -L&T make, ML4 fully automatic star delta starter - 1No, current preventer - 1No, 160Amps incommer 3 Pole MCCB - 1Nos,125A MCCB-1 No, 40Amps MCB's - 1Nos for capacitors, 1No Ammeter, 2Nos 10KVAR Oil cool power capacitors, 1No Volt meter, with CT coils, selector switches, 3 Phase indecating lamps, 32Amps DP MCB for lighting control 1No and 3 Phase alumininum busbar, necessary wiring etc ., including cost and conveyance of all material charges etc., completed as directed by the departmental authorities

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 80mm PN 1.6 (MPa)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 100mm PN 1.6 (MPa)

Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. For 80 mm PN 1.6 (MPa)

Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. For 100 mm PN 1.6 (MPa)

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 80 mm dia. x 15 mm thick

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). 100 mm dia. x 15 mm thick