REPAIRS RECANNING AND PAINTING OF STEEL FURNITURE AT MIL STN BHUJ AND GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Bed Hard MAP (Drawing No FD/E6/MAP/08) : Removing of Old Unsv centre Stiffner , and S&F new centre Stiffner of 25mmx25mm MS square Pipe 18 Gauge using gas welding and Standard workmanship complete with require nut & bolt as per shape and Size given in the Drg

Bed Hard MAP : Removing of Old Unsv Prelaminated Board from the header Frame and S&F new Prelaminated board of approved Make of Size 18mm in header Frame with require as per shape and Size given in the Drg

Bed Hard MAP : Removing of Old Unsv Prelaminated Board from the Footer Frame and S&F new Prelaminated board of approved Make of Size 18mm in footer Frame as per shape and Size given in the Drg

Bed Hard MAP : Removing of Old Unsv Plywood from the Bed Hard MAP and S&F new Plywood 12mm of approved Make commercial of relevant IS fixed with nut & bolt (10 Nos) all as shown in Drg

Bed Hard MAP : Prepartion of existing old Steel Surfaces of Bed Hard MAP, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Black paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Rack Shoe Steel MAP (Drawing No FD/E6/MAP/02) : M&L for Removing Old Frame of Rack Shoe Steel and S&F new Frame of 25 MM dia MS pipe as per Shape and Size given in Drg

Rack Shoe Steel MAP : M&L for Removing Old unsv portion of Rack Shoe Steel and S&F new 3 mm Dia MS Rod (9 Nos Equidistant) and 3mm Dia (3 Nos eqiudistant ) of shape and Size as given in Drg

Rack Shoe Steel MAP : M&L for prepartion of old Surface for painting and S& Paint with Spray Machine to complete Rack Parts with two coats of Syenthetic enamel paint black of approved make all as per Drg

Chair Computer (Drawing No FD/E6/MAP/01) : Removing of old unsv cloth of Chair Seat and Back and S&F new superior quality cloth fixed of approved Colour and quality by GE to the chair as per shape and size given in Drg

Chair Computer : Removing old Jack/Shocker and S&F new jack/Shocker of good quality as per shape and Size given in Drg

Chair Computer : Supply and fixing caster roller pin/screw type after taking out unsv castor roller pin/screw type of good quality

Chair Computer : Removing of old Foam of Seat and S&F of new foam of Shape and size as per Drg

Chair Computer : Removing of old Foam of Back and S&F of new foam of Shape and size as per Drg with PVC liping all around

Chair Computer MAP : Prepartion of existing old Steel Surfaces ofChair Computer MAP, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Black paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Table Computer (Drawing No FD/E6/MAP/03) : Removing existing broken damage Top of the Table and S&F new top as per shape and size given in the Drg made of 18mm Approve Prelaminated particle board with wooden edging 4mm duly polished

Table Computer : Removing existing broken damage bottom of key board of the Table and S&F new bottom as per shape and size given in the Drg made of 18mm thick approved Prelaminated particle board

Table computer :S&F of new sliding assembly No-10 made of chromium plated for key board of good quality approved make

Table computer :S&F of new sliding assembly No-05 made of chromium plated for drawer and mouse Stand of good quality approved make

Table Computer : Removing existing broken damage side stand Prelaminated board of the Table and S&F side stand Prelaminated board as per shape and size given in the Drg made of 18mm thick approved Prelaminated particle board

Table Computer : Removing existing broken damage Top of the lower Stand of Table and S&F new top of lower Stand as per shape and size given in the Drg made of 18mm Approve Prelaminated particle board

Table Computer MAP : Prepartion of existing old Steel Surfaces of Table Computer MAP, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Black paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Almirah Med steel with shelves (Drawing No FD-1032) : - M & L for removing unserviceable shelves from almirah med steel and S&F of new shelves made of 1.0 mm thick MS sheet all as specified and shown on drg and as directed by Engr-in-charge.

Removing of old leg and supply and fixing new leg of appropratie MS sheet as per shape and size given in Drg

M& L for spot welding to almirah med steel complete all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV 3 way locking device from almirah med steel and S&F new 3 way locking device all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV lock from almirah med steel and S& F new lock 6 lever brass Make: Godrej/Link of approved make rest all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV handle from almirah med steel and S&F of new handle of chromium plated mild steel all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV door hinges from almirah med steel and S&F of new door hinges 75 mm duly welded all as specified and shown on drg and as directed by Engr-in-charge.

Almirah Med Steel w/s : Prepartion of existing old Steel Surfaces of Almirah Med Steel with shelves, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Chair Varandah (Drawing No FD-256) : -M& L for spot welding to chair varandah complete all as directed.

M & L for removing UNSV cane plastic from chair varandah and smooth the surface and apply two coats of white synthetic enamel paint and S& weaving new plastic cane plastic cane 4mm vide of approved make complete all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV hard PVC shoes from chair verandah and S&F new PVC shoes four Nos each chair complete all as specified and shown on drg and as directed by Engr-in-charge.

Teapoy verandah (Drawing No FD-255) : M/L for removing UNSV top from teapoy verandah and fix the frame properly S&F top made out of prelaminated particle board 18mm thick exterior grade of approved make beaded with 4 mm thick teak wood beading Rest all as specified and shown on drg and as directed by Engr-in-charge.

Teapoy Varandah : Prepartion of existing old Steel Surfaces of Teapoy Varandah, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel white paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Locker Bed Side Steel (Drawing No FD-1029): M & L for removing UNSV handle from locker bed side steel and S&F stainless steel chromium plated handle 100mm of approved quality 2 Nos each all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV hasp and staple from locker bed side steel and S&F new Aluminium hasp and staple 100mm with appropriate screws all as specified and shown on drg and as directed by Engr-in-charge.

M & L for removing UNSV hanging rod from locker bed side steel and S & F CP Hanging rod 19mm dia 1.6 mm thick as approved and all as specified and shown on drg and as directed by Engr-in-charge.

Locker bed side Steel : Prepartion of existing old Steel Surfaces of Locker bed side Steel, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Grey paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Table 900x900x760mm Steel (Drawing No FD-1009) : M/L for removing UNSV top from Table 900x900x760mm Steel and fix the frame properly S&F top made out of prelaminated particle board 18mm thick exterior grade of approved make beaded with 4 mm thick teak wood beading Rest all as specified and shown on drg and as directed by Engr-in-charge.

Table 900x900x760mm Steel : Prepartion of existing old Steel Surfaces of Table, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Black paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

Table Dining OR steel (Drawing No FD-165 (M) ): Removing of old existing broken damaged table top, incuding fixing of frame properly & S&F new top made of 18 mm prelaminated Particle Board 18mm thick of approved make duly covered with 22 gauge thick aluminium Sheet with full threded machine as per shape and size given in the Drg

Table Dining OR Steel : Prepartion of existing old Steel Surfaces of Table, filling Cavaties with necssary putty to achieve smooth Surface and applying two coat of Syenthetic enamel Black paint of approved Make to achieve glossy Finish, rates quoted by the contractor should be inclusive of removing dents/correcting shape of deshaped steel parts to the normal position

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Nirmal Construction (BID ID -3107863)