Overhauling of Coolers and Pumps at various locations on ORV SAGAR KANYA

Amount

COOLERS: The following coolers to be reomved from the position,shifted to workshop,dismantled,overhauled,chemically cleaned,inspect the end covers and tube nest,end covers to be repaired and coat with glass flake,required tubes to be blanked,pressure tested at shell side and tube side,showned to ship staff,assembled with new gaskets,painted and ss fasteners,fitted in position,satisfactory operation to be showned to ship staff.all consumables,cooler end covers,drain cock valves gaskets,ss fasteners,cooper plugs,neoprene paint,drian plugs,chemicals,zinc anodes with brass adaptors are procure,supply and fitment in contractor scope.all machining works,end cover metal buildup works,welding and brazing works are in contractor scope.

AC condenser

Fridge condenser

Hydrosweep lab a/c condenser

Core fridge a/c condenser

ECR A/C condenser

PM A/C condenser

Alternators FW coolers to clean in situ. (type- Fine and tube type)

A/E lube oil coolers

A/E air coolers

LT coolers ,Maker: Alfa Laval type M 15.

HT coolers

Overhauling of Pumps: The following Pumps to be removed,dismantled,overhauled and fitted back. Bearings, wear rings, Orings and mechanical seal to be replaced.Impeller, casings, shafts to be inspected and repaired if found worn out ,Pump should be boxed up back and tried out for the performance test in the presence of ship staff/ IRS. job includes alignment with motor,NDT checks,alignment,trueness,initial and final reports and calibration reports to be submitted. All Required spares,Bearings(SKF/ FAG/ TIMKEN/ NTN), wear rings, O-rings and Mechanical seals(General seals/ SKF), sleeve, shaft key, bushes,ss fasteners(SS316),cocks,pump guards,joints,couplings and coupling pads and consumables are procure,supply and fitment in contractor scope. Test certificate and material certificate to be provided for Bearings and mechanical seals.satisfactory operation trials shown to ship staff and surveyor.

Hydrophore pumps

Centrifugal pumps A/C Sea Water Cooling Pump,Make- IRON A/S COPENHAGEN. Type-QVKL-4/300,90M3/HR

Centrifugal pumps LT Cooling Water Pump,Make- IRON A/S COPENHAGEN. Type-QVKL-8/800, 370M3/HR

Centrifugal pumps Fire & Bilge Pump,Make-IRON A/S COPENHAGEN, Type-QV -2-4/300 EA, 80m3/HR

Centrifugal pumps Bilge & Ballast Pump,Make-IRON A/S COPENHAGEN, Type-QV -2-4/300 EA, 80m3/HR

Centrifugal pumps DO transfer pump

Centrifugal pumps Chiller Pump,Make-IRON A/S COPENHAGEN, Type- QVKL 4/3020, 30M3/HOUR.

Centrifugal pumps Harbour Sea Water Pump,Make-IRON A/S COPENHAGEN, Type-80-65/250,30m3/HR

Oil pumps,type- Iron pump Type ON3 Port fwd inner pm LO pump

Oil pumps,type- Iron pump Type ON3 Port fwd outer pm LO pump

Oil pumps,type- Iron pump Type ON3 Port aft inner pm LO pump

Oil pumps,type- Iron pump Type ON3 Port aft outer pm LO pump

Oil pumps,type- Iron pump Type ON3 Stbd fwd inner pm LO pump

Oil pumps,type- Iron pump Type ON3 Stbd aft inner pm LO pump

Oil pumps,type- Iron pump Type ON3 Port fwd outer thrust LO HP pump

Oil pumps,type- Iron pump Type ON3 Port aft inner thrust LO circulating pump

Oil pumps,type- Iron pump Type ON3 Stbd fwd inner thrust LO HP pump

Oil pumps,type- Iron pump Type ON3 Stbd aft outer thrust LO circulating pump

Oil pumps,type- Iron pump Type ON3 Stbd aft inner thrust LO circulating pump

Oil pumps,type- Iron pump Type ON3 Emergency fire pump

Pure sea water pump (middle one) is not working, same to be made operational and requisite spares to be arranged. Discharge line is also leaking from the flange (PVC), same also to be arrested. Pump details-Leak proof pump (I)p ltd. Model no-ppe32n-200capacity 2mcube /hr, rpm 2900 5HP

Unused Stabiliser & associated pumps removed from place and handad over to ship.

Unused Fuel oil supply pumps & lines removed from place and handad over to ship

gk engineering works

SRISAI OILFIELD EQUIPMENTS AND MARINE SERVICES PVT LTD