Construction of toilets, CC Pathways, Chequrred terrazzo tiles flooring and paintings to Nandamuri Nagar ELSR Compound in 58th Division

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to work site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (For Plinth Beam)

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 347Kgs including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to work site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (For Culvert slabs)

Supplying, fitting and placing HYSD bar reinforcement as per drawings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including overlaps and wastages, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete.

Collection and supply of dust for filling inclduing cost and conveyance charges, spreading, sectioning etc., complete.

Providing concrete for plain concrete (M10) using 220Kgs cement, 40mm nominal size hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days etc., complete as per drawings and technical specifications of MORTH.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum. including cost and conveyance of all materials and labour charges etc,Complete.

Separation membrane of impermeable plastic sheeting 125micron thick

Supply of bituminous hot sealing compound (grade-A ISI ) poly sulphide and sealing the joints incl.cost and conveyance of all materials etc.but excl.labour charges for placing in position for contraction joints at 1.50 interval / for expansion joints/for longitudinal joints as per MORTH specification number 602-1 Rmt

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc., complete.

Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per ss.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting 2 Coats with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For Internal walls)

Painting 1 Coat with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (For External walls)

Floral Painting with mural arts after throughly brushing the surface to remove all dirt and remains of losse powdered materials, providing single coat of primary coat with water proof cement primer over existing Surface including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per approved design drawing and as directed by the officer incharge as per SS

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Flooring with chequrred terrazzo tiles of 22mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Manufacturing, Supply, Delivery and fixing of M.S. pipe using with M.S. plates including cost and conveyance of all materials and labour charges for cutting, welding, grinding etc., complete as directed by the departmental authorities.

Roofing with 0.5mm GI profile sheet of Standard make fixing with Necessary screws and washers complete etc., including cost and conveyance of all materilas and labour charges etc., completed (BMS-W.45)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes of 6kg/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. (6Kgs/cm2)

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of sizewith encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.(BMT-N.83A) (For Toilet door frames)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame (BMT-N.92) (For Toilet Doors)

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

For 28.60mm OD Pipe (SDR 13.50)

For 22.20mm OD Pipe (SDR 13.50)

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 630mm x 450mm. (BMW-D.05)

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC withall internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects:White Colour (BMW-D.18)

Supplying & fixing 15mm bib tap with flange Chromeum plated. (BMW-I.140)

Supply & fixing pillar cock Jaquar make Queen series with 7years warranty: Chrome plated (BMW-i.143)

Supply & Fixing of make chrome plated Metro pole flush valve concealed type with cover plate 40mm size with 7 years warranty. (BMW-I.198)

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated (BMW-I.141)

Labour Charges for fixing of CPVC Pipe lines and drainage facilities at proper gradient including fixing with nails and all labour charges etc., complete as directed by the departmental authorities. (LAB-00036) (For Plumbers Class-II)

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.(BMW-B.06)

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24)

Removing of Existing MS Staircase Grill and arranging proporly using with MS angulars,channels etc., including cost and conveyance of all necessary materials and labour charges for cutting, welding, grinding and placing in position etc., complete and as directed by the departmental authorities.

Engaging JCB on Hire basis for levelling site including fuel charges, wages of driver, helper and all operational and labour charges etc., complete.

Engaging Labour for removing of waste materials, cleaning site and levelling under tank including all labour charges etc., complete.

Supply and delivery fixing of 900mm dia RCC well rings of 8 Nos of each well with top cover including Earth work excavation,cost and conveyance of all materials and labour charges etc., complete.

Supply and fixing of 20mm dia 1.40mm to 1.55mm thick surface pvc pipe / casing and caping ISI with all accessories fixing at chromium plated metalic saddles and decolam board for swutches for light fan and separate plug points including all labour charges etc.,complete as directed by the departmental authorities.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 12 Module Horizontal/Vertical Cover Frame of recommended brands as per category I covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories (apsd-3.1.1)

Supply and Fixing of 18W/20W 1200 MM length LED batten light with extruded Aluminium housing and poly corbonate cover , input voltage AC 220-260 Volts with PF >0.9, surge protection 2 KV, THD <15 % with inbuilt driver and frosted cover CCT : 3000K -5700 K , minimum CRI >70, etc complete of make PHILLIPS ,LUMILEDS/OSRAM/SAMSUNG (sd)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.(apsd)