PROVN OF SOLAR GEYSER FOR MD ACCN PROVN OF WATER SUPPLY AT 3004 SQN AND SOME EM MAJOR REVENUE MINOR WORKS AT AF STN NALIYA

Amount

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick soft / loose soil complete all as specified and as directed.

Removing excavated material (Soils) from site to a distance not exc 50m away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed.

Supply and laying 80mm bore GI pipe medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches complete all as specified & directed.

Description all as per Srl Item No. 4.00 here-in-before but of size 150 mm bore

Description all as per Srl Item No. 4.00 here-in-before but of size 50 mm bore

Description all as per Srl Item No. 4.00 here-in-before but of size 25 mm bore

Description all as per Srl Item No. 4.00 here-in-before but of size 20 mm bore

Supplying & fixing 20mm bore gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unserviceable gate valves complete all as specified and as directed.

Description all as per Srl Item No. 9.00 here-in-before but of size 25 mm bore

Description all as per Srl Item No. 9.00 here-in-before but of size 50 mm bore

Material and Labour for CI fittings/specials such as Tees, bends (any type, radius and angle ) tapers any type, collars,tail pieces,caps and plugs up to 150 mm bore confirming to IS: 1538-1993 complete all as specified & directed.

Supplying and fixing, 150 mm bore MS flanges not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and directed.

Description all as per Srl Item No. 13.00 here-in-before but of size 80 mm bore

M&L for Joints with rubber or fibre board gasket including nuts, bolts and double washers of 150 mm bore complete all as specified and directed.

M&L for Joints with rubber or fibre board gasket including nuts,bolts and double washers of 80 mm bore complete all as specified and directed.

Supply, fixing, jointing & testing 150 mm bore cast Iron butterfly Valve of SS plate of sizes as under , designed for pressure PN 1.6 operating angle 90 degree, disc material CI with nylon coating, mounting type confirms to IS-13095 complete all as specified and directed.

Description all as per Srl Item No. 17.00 here-in-before but of size 80 mm bore

Supply, fixing, jointing and testing of 80mm bore Cast iron Non Return valve without by pass arrangement , Swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

Description all as per Srl Item No. 19.00 here-in-before but of size150 mm bore

Supply and fixing 4 way fire brigade Inlet Connection (ISI marked) including nut, bolt washer and rubber gasket etc complete all as specified & directed.

Supply & lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire, armoured , electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor, cross-sectional area 50 sqmm, 3.5 core laid in trenches/crossing the dispersal/culverts/ fixed on panels/wall complete all as specified & directed.

Supplying and laying reinforced precast concrete cable cover class HVP Type 1 with peak size 300 mm x180 mm x 40 mm complete all as specified & directed.

M & L for sand cushioning in layers of sand before and after laying of cable in trenches complete all as specified and directed.

Material and labour for rendering 15 mm thick with cement mortar(1:4) on fair faces of brick walls for finishing the surfaces fair and even complete all as specified & directed.

Material and labour for brick work with subclass 'B' bricks, straight or curved on plan exc 6m means radius built in cement mortar 1:6 complete all as specified & directed.

M&L for PCC (1:4:8) (by using 40 mm graded crushed broken stone aggregate) for foundation filling & mass concrete complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 coping with (20mm graded crushed broken stone aggregate) for grouting MS frame complete all as specified & directed.

M&L for PCC (1:3:6) type C-2 (by using 40 mm graded crushed broken stone aggregate) for mass concrete complete all as specified & directed.

M&L for PCC (1:3:6) type C-1 (by using 20 mm graded crushed broken stone aggregate) for mass concrete complete all as specified & directed.

Material and labour for MS works of any sizes of angles irons/flat iron works for, Openwell submersible pump set and base frame etc complete all as specified and directed.

Material and labour for MS works of any sizes of MS sheet 3 mm thick works for U/S UG Sumps for making valve pit cover and UG Sump cover etc complete all as specified and directed.

Material and labour for writing letters or figures (Block, Roman, Itralic or Indian) n exc. 30 cm hight on existing main header, suction/delivery pipe lines, Pumps and motors and UG sumps etc. complete all as specified and directed.

Material and labour for painting to existing surcface by using spray gun with one coat of red oxide and two coat of synthetic enamel paints on existing suction/ delivery pipe lines, including Headers of any size using Blue/Red/Black colour as per site requirement complete all as specified and directed.

M&L for high density polythne pipes of size 110 mm (HDPE) of pressure rating 6 kgf/ cm2 laid in to borewell as column pipe or in surface etc, complete including all accessories and jointing materials complete including Taking down old GI column pipe of 100 mm complete all as specified and directed.

S&F Pressure gauge 4 " dail 0-14 Kgs/Cm2 rating complete all as specified and directed.

S&F Jointing of HDPE pipe of 110 mm bore duly heated on ends of HDPE pipe in built with socketed end, flanges, incl nut & bolts and washers etc required at site complete all as specified and as directed.

Supply and fixing MS pipe header as per IS-3589, 250 mm dia size min 6 mm thick 2 mtr length with flanged ends closed with dead plates not less than 18 mm thich fixed with nuts bolts and washers and rubber gasket and including provision of following incomming and outgoing connection of MS Pipe, Heavy duty Class 'C' of length 300 mm with flaged ends with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. (a) 100 mm dia incoming -02 No (b) 150 mm dia outgoing -02 Nos Note :- (i) Welding work/cutting work , nuts bolts, washers and any types of works are deemed to be included in the unit rate. (ii) Brick work and PCC work shall be measured and paid separately under respective items. (iii) Cast Iron Butterfly Valve/Strainer/Water meter , shall be measured and paid separately under respective items.

Supply and fixing jointing and testing of submersible copper cable of size 10 Sqmm 3 core 1100 volts complete all as specified and directed.

Supply and installed testing and commissoining Horizontal openwell submersible Mono set of capacity 800 - 1400 LPM of 36-60 mtr head 20 HP, 15 KW , 3000 RPM, three phase, 415 volts, including making electrical connections of submersible cable etc. complete all as specified and directed.

M&L for earthling complete with galvanized steel earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized iron strip of size 25 x 4 mm as earth lead by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 5 of SSR part-I 2009, 20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 40 mm dia from earth pit to main board. Note:- 1. Maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs including necessary pit with cover, including testing on complition. 2. Neccesary excavation & earthwork shall also be included in the quoted rate.

Supply and fix Pedestal fans AC single phase 230/ 240 V of size 400 mm sweep complete all as specified & directed.

Supply and fixing/drawing wiring for Circuit / Submain wiring with PVC casing caping of suitable size inclusive of all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories including all fixtures /fittings fixed on wall/ceiling along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 2.5 sqmm and 1 x 2.5 sqmm as earth wire complete all as specified & directed.

M & L Earthing complete with Copper earth plate electrode 60×60cm× 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to Copper lead strip 20x3 mm by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 5 of SSR part-I 2009, 20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 40 mm dia from earth pit to main board. Note:- 1. Maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs including necessary pit with cover, including testing on complition. 2. Neccesary excavation & earthwork shall also be included in the quoted rate.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified & as directed.

Supply & fix single pointed air termination Copper rod 12mm dia, 300 mm long all as directed

Supply & fix GI pipe 1.5 RM long medium grade vertically fixed by means of PCC 1:2:4 of size 1x1x0.5 Cubic Feet for mounting of Copper air termination rod complete all as specified & as directed.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip including insulators complete all as specified & as directed.

Supply and fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver of metal body material complete all as specified & as directed.

M&L for making hole in block masonry/stone wall of suitable size for fixing of exhaust fan 300 mm sweep including placing 0.56mm SS wire mesh between wall and exhaust fan & making good surface with smoothing of surface and painting of one coat of primer and one coat of paint as per existing paint at disturbed area complete all as specified & directed.

M & L for point wiring complete with 1.5 Sqmm PVC insulated and unsheathed cable single core multi stranded copper conductor, 1100 volts grade drawn through and including PVC casing / capping/ concealed, medium grade of any size with all accessories like bends, junction boxes etc including copper earth continuity wire of PVC insulated of size 1.50 Sqmm and connected to common earth dolly with all accessories including sunken type pressed steel terminal boxes 3mm thick hylam/ bakelite sheet, complete as specified for One Exhaust fan point controlled by one switch complete all as specified & directed.

Supply and fix desert cooler electric driven (single phase), having minimum capacity 67 Liters, Ideal for room size of upto 750 Sq Ft. Suitable for all climates and costal regions, dimensions (LxBxH):64.0cmx55.0 cmx111.0cm wood wool cooling media, easily removable pads, three side cooling pads Power 200W minimum Plastic/PVC Body complete all as specified & as directed.

Supply and install air cooed split unit Air Conditioners (Copper) electric driven single Phase 230 Volts of capacity of 1.5 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum BEE 3 star rating complete all as specified & as directed.

Supply and install Electronic wall mounting type voltage stablizer suitable for AC upto 1.5 TR for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ±2.5% and of capacity 4.0 KVA.

Supply and fix in replacement industrial plug and socket with single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and as directed.

Supply and fixing/drawing wiring for Circuit / Submain wiring with PVC casing caping of suitable size inclusive of all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories including all fixtures /fittings fixed on wall/ceiling along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 4.0 sqmm and 1 x 2.5 sqmm as earth wire Complete all as Specified & directed.

Supply and install hi wall split units indoor/outdoor of capacity 2.0 TR with copper condensor coil inverter AC complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity complete all as specified & as directed.

Supply and install Electronic wall mounting type stablizer suitable for AC upto 2.0 TR Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 volt with output voltage stabilized at 230 volt with accuracy of ±2.5% and of capacity 5.0 KVAcomplete all as specified & as directed.

Supply and fixing/drawing wiring for Circuit / Submain wiring with PVC casing caping of suitable size inclusive of all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories including all fixtures /fittings fixed on wall/ceiling along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required of 2 x 6.0 sqmm and 1 x 4.0 sqmm as earth wire Complete all as Specified & directed.

S&F industrial/ commercial portable desert cooler with stand, air flow 25Mtr, chiller type, ideal for room size of upto 1000 sqft, made of plastic, tank capacity (up to brim-i-S)65 litres, Blower / Fan dia(mm) 525, cooling media Honeycomb, Pad thickness(mm) 50 and size-LBH as 870x440x1050 approx including electrical and water connection from nearby source (uoto 15 RM) complete all as specified and as directed.

M&L for chemical earthing complete with Copper earth plate electrode 90cmx60cm x 5 mm thick buried directly in ground vertically to depth not less than 3.00 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including Copper strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steel including provn of GI protection pipe light grade of 40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt(150Kg Approx), Coal(100Kg Approx) & Magnesium sulphate(100 Kg Approx) including returning filling with cultivated soil from near by source etc. complete.Note: copper strip exceeding 7.5m long shall be measured & paid separately.The earth resistance value less than 1 ohm.Failing to achieve the value the contractor shall be re do the earthing without any extra cost.

Supply & Fix Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation with suitable size insulators for loop earthing etc. as required 32 x 6 mm copper strip including welding/brazing at jointscomplete all as specified & as directed.

Supply & fix ceiling fan 230 volts single phase of 1200 mm sweep complete all as specified & as directed.

S&F industrial/ residential portable desert cooler, air flow 18000cmh/10500 cfm, chiller type, ideal for room size of upto 2500 sqft, made of plastic, tank capacity (up to brim-L)100 litres, Blower/Fan dia(mm) 750, cooling media honeycomb, pad thickness 50/75/50 and size LBH as 1125x725x1560 approx including electrical and water connection from nearby source approx-25m distance complete as specified & as directed.

Supply, install, testing and commisioning of 'SOLAR WATER SYSTEM' (evacuated tube collector) based on indirect transferring of heat of capacity 100LPD complete all as specified & as directed. Note: Quoted rate shall also the cost of electrical back up, stainless steel hot water tank and steel structure for mounting of tank.

S&F 25mm dia size stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified & as directed.

S&F 15mm dia size bib taps cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule including 15mm dia PP-R pipe with reducer socket etc for connection complete all as specified & as directed.

S&F Rotational moulded polythyelene water storage tanks of capacity 250 ltr (cylindrical vertical with closed top) hoisted and fixed in position specified in SSR part-I complete all as specified & as directed.

S&F 3 layer PP-R (Polypropylene random copolymer) concealed pipe of size 20mm dia SDR 7.4 (PN-16) UV stabilzed and anti crobial fusion welded having thermal stability of hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid on wall, ceiling or on floor complete all as specified & as directed.

S&F stop valve of size 20mm dia PP-R (Brass insert) of any colour high pressure and fixed complete all as specified & as directed.

M&L for framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railing, framework of water tank (size of angle 75x50x6mm thick) and similar work confirming to Fe-290 grade E-165 complete all as specified & as directed.

M&L for preparation of steel surface of any description exceeding 10CM width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified & as directed.

KALIKAY ENTERPRISES

Vijay Construction Co