REPAIR MAINTENANCE AND PAINTING OF STEEL FURNITURE ITEMS AT AF STN NALIYA UNDER GE(AF) NALIYA

Amount

Removing following old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ” and supply and fix new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as specified and shown on drawing. (Drg No FD-1031 & 1032)

MS lock 6 livers best quality with brass livers & duplicate key Make:- Harrison/Samrat/Lico or equivalent as approved by the GE.

Mild steel chromium plated handle 125 mm size . Make : link/Lico/MK/Man

Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing.

Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine complete all as specified and directed.

Removing the existing unserviceable plywood from BED HARD STEEL & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as specified and shown on drawing. (Drg No FD / E6/ Map / 08 (R)

Removing the existing unserviceable pre-laminted partical board from head rest of Bed Hard Steel, and supply and fix 18/19 mm pre laminated patical board of same size, existing pattern with beading, screw etc complete all as specified and shown on drawing. (Drg No FD / E6/ MAP/08 (R))

Removing the existing unserviceable pre-laminted partical board from foot rest of Bed Hard Steel, and supply and fix 18/19 mm pre- laminated patical board of same size, existing pattern with beading, screw etc complete all as specified and shown on drawing. (Drg No FD / E6/ MAP / 08 (R))

Removing following old and unserviceable parts / components of “TEAPOY VARANDAH” and supply and fix new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as specified and shown on drawing.(Drg No FD-35)

Removing old u/s tops and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around complete all as specified and shown on drawing.

Leg fabricated with 20 mm dia mild steel conduit pipe of wall thickness 1.6 mm including bending in 'U' shape complete all as specified and shown on drawing.

Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood top by removing nylon Newar and supply and fix of 12mm thick ply, ISI mark of size 1980mm X 900mm by fixing with 12Nos nut and bolt of suitable size with GI washer along with provision of 25mm x 3mm Flat iron stiffner 02 Nos at the ends to welded with the top of long rail as directed by GE.The MS pipes shall be painted with two coats of synthetic enamel black paint over a coat of red (FD-220) complete all as specified and directed.

Removing of damaged/broken long rail from charpoy GI pipe and supply and fix new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides complete all as specified and shown on drawing.

Removing of old damaged/broken long rail from charpoy GI pipe and making of short rail from u/s long rail including threading & fixing in charpoy GI pipe complete all as specified and shown on drawing.

Removing of old damaged/broken short rail from charpoy GI pipe and making leg from u/s short rail including threading, fixing 3mm thick MS plate in bottom to be welded with legs & fixing in charpoy GI pipe complete all as specified and shown on drawing.

Removing old broken/damaged GI elbow from charpoy GI pipe and supply and fix new GI elbow 3way 32mm bore (ISI marked) complete all as specified and shown on drawing.

Removing old and unserviceable parts/components of Charpoy GI Pipe Plywood Top"and supply and fix in replacement plywood BWR grade ISI marked 12mm thick to the top of the charpoy with suitable nuts,bolts & washers complete all as specified and shown on drawing. Drg No.(FD-220)

Removing old and unserviceable parts/components of CHARPOY IP HARD TOP"and supply and fix in replacement plywood BWR grade ISI marked 12mm thick to the top of the charpoy with suitable nuts,bolts & washers complete all as specified and shown on drawing. Drg No.(FD/MAP-II/01)

Removing following old and unserviceable parts / components of “ CHAIR TUBULAR OFFICE STEEL WITH / WITHOUT ARMS” and supply and fix new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as specified and shown on drawing. (Drg No FD-75 (M)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

Material and labour for re-canning of "CHAIR VERANDAH" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint complete all as specified and shown in drawing (Drg No FD - 256)

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel.

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and supply and fix new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as specified and shown on drawing.(Drg No FD-1004)

Removing old u/s tops and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading complete all as specified and shown on drawing.

Removing of unserviceable/broken/Damaged/Rusted drawers and Supply and fix new drawers made out 1mm thick MS sheet complete all as specified and shown on drawing.

Material and labour for removal of existing unserviceable lock of any description in any position, supply and fix new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed.

Replacement of rubber shoe with Supply and fix new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and supply and fix new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as specified and shown on drawing.(Drg No FD-1003)

Removing old u/s tops and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading complete all as specified and shown on drawing.

Removing of unserviceable/broken/Damaged/Rusted drawers and Supply and fix new drawers made out 1mm thick MS sheet complete all as specified and shown on drawing.

Material and labour for removal of existing unserviceable lock of any description in any position, supply and fix new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed.

Replacement of rubber shoe with Supply and fix new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and supply and fix new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as specified and shown on drawing. (Drg No -TP/ Godrej/Durian/HOF & etc )

Removing the existing old foam & tapestry of seat and supply and fix new 40 density foam cushion 75 mm with tapestry as approved By GE .

All as per serial item number 18.01 here-in-before but Back of chair revolving.

All as per serial item number 18.01 here-in-before but Arm of chair revolving.

Removing the existing unserviceable casteor wheel and supply and fix new caster wheel.

Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc.

Replacement of complete plate base stand assembly including all necessary fitting etc.

Removing following old and unserviceable parts / components of “TABLE DINING ORs” and supply and fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as specified and shown in drawing. (Drg No FD-165 (M))

Removing of old u/s top and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side with PVC beading all around complete all as specified and shown in drawing

Material and labour for preparation of old painted surfaces applying sand paper and filling with putty (wherever required) and apply one coat of synthetic enamel paint (black) complete all as specified and directed.

Removing the existing u/s legs and supply and fix new legs made out of 25mm MS square tube 1.6mm thick as per size and shape complete all as specified and shown in drawing.

Replacement of rubber shoe with supply and fix new hard rubber shoe of superior quality complete all as specified and shown in drawing.

Removing following old and unserviceable parts / components of “LOCKER BED SIDE STEEL” and S&F new parts / components of same size, existing pattern with welding etc and painting to match with existing complete all as specified and shown in drawing.(Drg No FD-1029)

Material and labour for removal of existing unserviceable handle and supply and fix new chromium plated handle 100mm long including fixing with suitable nut/pins complete all as specified and directed.

Material and labour for removal of existing unserviceable conduit pipe and supply and fix new MS chromium plated conduit 19mm dia complete all as specified and directed.

Material and labour for continous gas welding at damaged portions/joints complete all as specified and directed Note :- Each joint to be measured separately.

Removing following old and unserviceable parts / components of “CHAIR SCHOOL HAND BOARD” and supply and fix new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as specified and shown in drawing. (Drg No FD / E6 / MAP / 05)

Supply and fix in repair PVC Seat & back one piece. (Drg No.FD/ E6/ MAP/ 05) Make:- Blowplast / Supreme / Cello / National, Amko)

Removing old u/s tops from and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all aroundcomplete all as specified and shown in drawing.

Hard rubber shoe.

Removing following old and unserviceable parts / components of “TABLE 3X3 STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as specified and shown in drawing. (Drg No FD-1009)

Removing old unserviceable tops and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around complete all as specified and shown in drawing.

Leg fabricated with 25 mm size steel square tube with 1.6 mm wall thickness.

Removing following old and unserviceable parts / components of “Table Computer” and supply and fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as specified and shown on drawing. (Drg No FD/E6/MAP/03)

Removing old unserviceable tops and supply and fix new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around complete all as specified and shown in drawing.

Material and labour for drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality complete all as specified and shown in drawing.

All as per serial item number 23.02 here-in-before but Pull out tray for mouse.

All as per serial item number 23.02 here-in-before but for Key Board.

Removing following old and unserviceable parts / components of “Table Bed side" and supply and fix new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as specified and shown in drawing. (Drg No FD/E6/MAP/15 (R))

Removing old u/s tops and supply and fix new top along with the side portion made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around complete all as specified and shown in drawing.

Material and labour for drawer made out of 12 mm commercial BWR plywood of three sides with front portion of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around complete all as specified and shown in drawing.

Back side of table bed side made out of 6 mm thick commercial face plywood.

Handles complete all as specified and shown in drawing.

Material and labour for spot Welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of welding 6 mm, including scraping, preparing surface of welded portion by grinding and buffing to match with existing.

Material and labour for preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying with putty (wherever required) and applying one coat of synthetic enamel paint with spray gun as per existing colour complete all as specified and directed.

Almirah med steel (Drg No - FD 243 /1032)

Almirah large steel (Drg No - FD 67/1031)

Chair CB steel tubular w/o arms (Drg No - FD-75 M)

Chair CB steel w/arm (Drg No - FD-75 M)

Rack 6 tier steel (Drg No - FD-1038)

Rack Shoe Steel (Drg No - FD E6 MAP 02)

Steel Shelving Small (Drg No - FD E6 MAP 18)

Steel Shelving large (Drg No - FD E6 MAP 19)

Table office officers steel (Drg No - FD 84 M,1003)

Table office clerk steel (Drg No - FD 84 M,1004)

Table 900 x 900 x 760 Steel (Drg No - FD-1009)

Teapoy verandah (Drg No - FD 35 / 255 / 383)

Bed hard steel (Drg No - FD / E6 / MAP / 8 (R))

Charpoy IP with hard top (Drg No - FD / MAP- II /01)

Chair School Hand Board Drg No FD / E6 / MAP / 05

Locker Bed Side” (Drg No / FD - 1029)

Chair varandah Steel FD/E6/MAP/

JOY ENTERPRISE