PROVN OF MISC E/M AND B/R MINOR WORK AT AF STSATION SURYALANKA

Amount

Supply and fixing of the electric chimney of wall mounted type, 60 cm width , Heat auto clan, Filterless, touch / gesture controls, wave sensor and suction pressure of 1200 M3/Hr, LED Lights, including Aluminium exhaust pipe duct size not less than 6 inches dia and length not less than 15 feet, including suitable clamps, end point of pipe should be insert in the existing hole duly removing UNSV exhaust fan and preparation of hole suitable size for exhaust duct and making good with complete all as specified and as directed.

S&F in repairs sub main wiring with two run of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 2.5 Sqmm copper multistranded of suitable size conductor including and drawing into Surface PVC conduit, making good with fixed on/in wall, ceiling including 2.5 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete all as specified and as directed.

S&F in repairs flush type switch socket combination 16A, 3 pin, with gange box fixing on wall/tiles surface complete all as specified and as directed.

Supply and lay in trenches/fixed to walls/poles etc and commissioning UG XLPE Cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core and complete all as specified and as directed.

Exc in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cable. and getting out in any type of soil complete all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and complete all as specified and as directed.. Note:- Punned quantity will be measured paid at this item.

Supply and lay in trenches DWC HDPE cable duct pipe of 40 mm inner dia for cable protection complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing garden lights LED bollard 10W, 0.6 M height with necessary connection with Junction boxes including 20x20x20cm foundation with PCC (1:2:6) complete all as specified and directed. Make : Model-Mini mount bl10wled 830psymtopmma of Havells or equivalent in approved make

S & F Junction box 1 to 4 way, external dia 20mm suitable for garden light of 10w and post light of 25w complete all as specified and directed.

Supply and fixing PVC insulated 3 core cables 1.5 Sqmm size, 1100 volts grade with copper conductor (FR-LSH, 1.0 Sqmm earth wire) and drawing into garden light brackets/PVC conduits and connecting with Junction box, also drawing into post lights brackets and connecting with junction box complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 AMP, in the junction box complete with connection testing and commissioning. complete all as specified and as directed.

Supply and fixing of Analog ordinary timer in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing of power contactor 240V AC in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 04 x post light of 25W with necessary connection complete all specified and directed. Make: Model- Havells 25 Ruby Mini Post top LED lamp 4000K or equivalent in approved make complete all as specified and as directed.

Supply and lay Tubes, 'light grade' galvansized 40mm dia for cable protection with all fitting and fixed complete to walls and ceiling or laid in floors/road crossing complete all as specified and as directed.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m meand radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 5mm thick Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from frame ) exceeding 1.5 sqm but not exceeding 4 Sqm each all as specified and directed. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed.

S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawings complete all as specified and as directed.

S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.

S&F 125 mm size Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type B-21 complete all as specified and as directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed in repairs complete all as specified and as directed.

S&F 150 mm long Aluminium alloy handles cast type anodised complete all as specified and as directed.

Point wiring complete with stranded copper conductor 2 runs of 1.5 sqmm size (Nominal area) PVC insulated FRLS unsheathed cable 1100 Volts grade conforming to IS 694 drawn in and including 1.6 mm thick concealed ERW steel conduit conforming to IS 9537 (Part-II) of size not less than 25mm dia including flame proof fittings such as junction box, MS couplings unions bends, reducers inspection elbow, sealing conduets plugs etc and also including single core stranded copper conductor 1.5 Sqmm PVC insulated unshealthed cable as earth wire to common earth and connected to earth dolly and the body of flame proof luminaires and drawn in the same surface conduit complete all as specified and directed. (for light / ceiling fan/ exhaust fan point)

All as per item No. 31 above, but with 4.0 sqmm cable for 16/20 Amps Socket independent complete all as specified and as directed.

Supply and fixing LED light fitting 4 feet 1x16/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed.

Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and as directed.

Flame proof junction boxes with 15 Amps terminal block 4 way plain cover, minimum 20 mm dia entry holes and connecting up electrically the flame proof method complete all as specified and as directed.

Flame proof flexible metallic hose conduit M20 / 3/4" conduit M x M or Fx M or F x F 500 mm complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross-sectional area, single core PVC insulated (FRLS), unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and including rigid non-metallic PVC concealed conduit 25mm dia medium grade and accessories ISI marked and including chases Cutting and making good surfaces, suitable modular pressed steel terminal boxes 1.6mm thick (recessed) for fixing of switches, sockets etc including 1.5 Sqmm nominal cross sectional area, single core PVC insulated (FRLS), unsheathed multistranded copper conductor cable earth continuity wire to common earth and connected to earth dolly for one light / fan/ Security light/ 5Amps Indp Socket / Bell point controlled by one switch complete all as specified and directed

S&F modular switch one way 6 Amps, 1 module complete all as specified and as directed.

S&F of modular switch socket combination 6A, 6 pin, 3 module complete all as specified and as directed.

S&F of modular Fan regulator electronic step type, 120W- 2 module, 240V single phase complete all as specified and as directed.

S&F of ceiling rose, 3 plate PVC/polycarbonate, isolated body complete all as specified and as directed.

S&F 3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed.

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for heavy duty wall mounting with Plastic body , 3 speed, low noise, speed 1440 Rpm, including necessary fixing arrangements on wall / pillar by using clamp, screws, nuts & Bolts as required complete all as specified and directed by Engr-in -charg

Supply and fix of industrial heavy duty Air circulator Pedestal fan 230 volt Single phase 450 mm Sweep with plastic body and Air delivery of 150 Cubic meter ,3 blades having speed of 1440 Rpm , No. of Speed setting should be 3 complete all as specified and as directed. directed by Engr-in -charg

Supply and fix min 3 star rating ceiling fans, complete with three blade, suitable length down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, Rubber bush for shackle with bolt, nut and lock pin for fixing on Slab/truss by provision of suitable hook/Clamp for hanging of ceiling fan complete all as specified and as directed.

S&F of MCB, SP 6-32 Amps, C Curve, 10 kA, Complete all as specified and as directed.

S&F sub main wiring with two run of single core cable FRLS PVC insulated sheathed cable 1100 volts grade 2.5 Sqmm copper multistranded conductor including and drawing into concealed/surface PVC conduit, fixed on/in wall, ceiling including 2.5 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth complete including taking down existing sub main wiring complete all as specified and as directed.

M/S SIRI BUILDERS (BID ID -3144670)

PAVANI INFRAS (BID ID -3147182)