Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.9 LAdmitted-Finance AISHA BHAWAN 643 648 SHOP NO 202 FASIL ROAD FARASHKHANA BEHIND G B ROAD DELHI 110006 | NORTH | DELHI | 110006 | L1 | Admitted-Finance | |
| 2 | L2₹1.0 Cr+₹4.9 L (5.00%)Admitted-Finance 108 3 CHANDAR NAGAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MITTAL MACHINES PVT LTD L2 | ELECTROHARD INDUSTRIAL SOLUTIONS L1 |
|---|---|---|---|---|---|
| 1.01AT TUBE WELL -1 | |||||
| 1.02 | SUBMERSIBLE PUMP MOTOR SET, DISCHARGE 750 LPM AND HEAD 100 METER, 25 HP | 2 | SET | 5,57,000 ₹5,57,000 | 5,43,000 ₹5,43,000 Lowest |
| 1.03 | SUPPLY ,INSTALLATION ,TESTING AND COMMISSIONING(SITC) ON TURNKEY BASIS FOR FULLY AUTOMATIC CONTROL PANEL WITH AUTOMATIC STARTER | 1 | SET | 2,27,500 ₹2,27,500 | 2,21,430 ₹2,21,430 Lowest |
| 1.04 | SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 100 AMP CHANGE OVER SWITCH IN STEEL SHEET ENCLOSURE | 1 | SET | 33,500 ₹33,500 | 31,320 ₹31,320 Lowest |
| 1.05MAIN PIPING AND VALVES :- MS PIPE HEAVY DUTY 100 MM, THICKNESS 7.90 MM THICKNESS WITH FLANGES WELDED AT BOTH ENDS FOR INTERLOCKING ARRANGMNETS , OUTER CUT ON FLANGES FOR SUBMERSIBLE CABLE ALONG WITH PACKING AND NUT BOLTS (1 PIPE = 3 METER= 20 PIPE) ALONG WITH FOLLOWING :- | |||||
| 1.06 | • CAST STEEL SLUICE VALVE 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR BYPASS ARRANGEMENTS)
• CAST STEEL NON RETURN VALVES 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR RISING MAIN)
• 100 MM DIA MS BEND 900 Bend -2 Nos
• 100 MM MS TEE : 01 NOS
• MS DISTANCE PIPE 100 MM, 1.5 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 02 NOS
• MS DISTANCE PIPE 100 MM, 1.0 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 01 NOS
• MS NRV TAIL PIECE
• MS TOP CASING COVER : 01 NO
• NUT BOLTS, PACKING AND JOINTING MATERIAL : 01 SET | 1 | SET | 3,29,800 ₹3,29,800 | 3,25,940 ₹3,25,940 Lowest |
| 1.07 | SUPPLY OF 02 TONNE WITH 10 METER CHAIN HEAVY DUTY
CHAIN PULLEY | 1 | SET | 36,500 ₹36,500 | 33,790 ₹33,790 Lowest |
| 1.08 | POWER WIRING AND EARTHING MATERIAL
A. SUBMERSIBLE COPPER CABLE REQUIRED , SIZE 16 SQMM * 3 CORE : 120 METER
B. POWER CABLE FROM MAIN TO SATRTER REQUIRED IS ALMUINUM ARM. 50 SQMM * 3.5 CORE : 80 METER
C. LUGS AND JOINTING MATERIAL : 01 SET
D. EARTHING REQUIRED FOR PUMP AND PANEL : 01 SET
E. EARTHING REQUIRED FOR SERVO VOLTAGE STABILZERS : 01 SET) | 1 | SET | 1,48,500 ₹1,48,500 | 1,43,180 ₹1,43,180 Lowest |
| 1.09 | GAUGES :- SUPPLY AND FIXING OF GAUGES AND FITTINGS
PRESSURE GAUGE 100 MM DIAL SIZE OF 0-100 KG/ CM2-01 NO.
COMPOUND GAUGE 100 MM DIAL SIZE OF 0-1 KG/ CM 2 -01 NO.
HEAVY DUTY CONTROL COCK-01 NO
M.S. NIPPLE PIPES, ELBOWS ETC. REQUIRED FOR FIXING THE ABOVE GAUGES ON PUMP 01 SET. | 1 | SET | 7,650 ₹7,650 | 7,243 ₹7,243 Lowest |
| 1.10 | ELECTRONIC CHLORINE DOSING SYSTEM COMPLETE IN 6 KG PRESSURE, 230 V WITH INSTALLATION, 100 LTR TANK AND CONNECT WITH STARTER COMPLETE | 1 | SET | 35,600 ₹35,600 | 30,460 ₹30,460 Lowest |
Tender Value
Refer Docs
EMD Value
₹2 L
Closing Date
25 Jan 2025, 5:00 pmClosed
Assistant accountant
Office of Exevutive Engineer Uttarkhand Jal Sansthan Purola
Supply Installation Testing and Commissioning SITC of Tubewell Submersible Pumping Plant with complete Pumping Equipments and Accessories at Barkot Nagar Palika Pumping Scheme
2025_UKJS_79459_1
1213/Nivida/2024-25 Dt. 04-01-2025
Open Tender
Electrical Works
Item Wise
Barkot
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,720
Yes
Executive Engineer Uttarakhand jal Sansthan Purola
₹2 L
Yes
5 Feb 2025
15 Jan 2025
28 Jan 2025
15 Jan 2025
25 Jan 2025
15 Jan 2025
AT TUBE WELL -1
SUBMERSIBLE PUMP MOTOR SET, DISCHARGE 750 LPM AND HEAD 100 METER, 25 HP
SUPPLY ,INSTALLATION ,TESTING AND COMMISSIONING(SITC) ON TURNKEY BASIS FOR FULLY AUTOMATIC CONTROL PANEL WITH AUTOMATIC STARTER
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 100 AMP CHANGE OVER SWITCH IN STEEL SHEET ENCLOSURE
MAIN PIPING AND VALVES :- MS PIPE HEAVY DUTY 100 MM, THICKNESS 7.90 MM THICKNESS WITH FLANGES WELDED AT BOTH ENDS FOR INTERLOCKING ARRANGMNETS , OUTER CUT ON FLANGES FOR SUBMERSIBLE CABLE ALONG WITH PACKING AND NUT BOLTS (1 PIPE = 3 METER= 20 PIPE) ALONG WITH FOLLOWING :-
• CAST STEEL SLUICE VALVE 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR BYPASS ARRANGEMENTS) • CAST STEEL NON RETURN VALVES 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR RISING MAIN) • 100 MM DIA MS BEND 900 Bend -2 Nos • 100 MM MS TEE : 01 NOS • MS DISTANCE PIPE 100 MM, 1.5 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 02 NOS • MS DISTANCE PIPE 100 MM, 1.0 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 01 NOS • MS NRV TAIL PIECE • MS TOP CASING COVER : 01 NO • NUT BOLTS, PACKING AND JOINTING MATERIAL : 01 SET
SUPPLY OF 02 TONNE WITH 10 METER CHAIN HEAVY DUTY CHAIN PULLEY
POWER WIRING AND EARTHING MATERIAL A. SUBMERSIBLE COPPER CABLE REQUIRED , SIZE 16 SQMM * 3 CORE : 120 METER B. POWER CABLE FROM MAIN TO SATRTER REQUIRED IS ALMUINUM ARM. 50 SQMM * 3.5 CORE : 80 METER C. LUGS AND JOINTING MATERIAL : 01 SET D. EARTHING REQUIRED FOR PUMP AND PANEL : 01 SET E. EARTHING REQUIRED FOR SERVO VOLTAGE STABILZERS : 01 SET)
GAUGES :- SUPPLY AND FIXING OF GAUGES AND FITTINGS PRESSURE GAUGE 100 MM DIAL SIZE OF 0-100 KG/ CM2-01 NO. COMPOUND GAUGE 100 MM DIAL SIZE OF 0-1 KG/ CM 2 -01 NO. HEAVY DUTY CONTROL COCK-01 NO M.S. NIPPLE PIPES, ELBOWS ETC. REQUIRED FOR FIXING THE ABOVE GAUGES ON PUMP 01 SET.
ELECTRONIC CHLORINE DOSING SYSTEM COMPLETE IN 6 KG PRESSURE, 230 V WITH INSTALLATION, 100 LTR TANK AND CONNECT WITH STARTER COMPLETE
RUBBER INSULATION MAT
SITC OF SERVOKON MAKE ROLLING CONTACT SERVO VOLTAGE STABILIZER 50 KVA (3 PHASE) ISO CERTIFIED, SUITABLE FOR INDOOR USE, WITH STAND AMBIENT TEMPRATURE UPTO 55 DEG-CEL UNIT IS A COMBINATION OF THREE NO SINGLE PHASE AIR-COOLED UNITS IMMERSED IN ONE OIL COOLED TANK WITH SEPARATE CONTROL CIRCUIT FOR INDIVIDUAL CORRECTION IN EACH PHASE, COMBINATION SUITABLE FOR BALANCE- UNBALANCED SUPPLY AND LOAD, INPUT VOLTAGE: 280- 460 VOLT, OUTPUT VOLTAGE ; 415(+/-)1% TYPE : ROLLING CONTACT (LINEAR TYPE)
COPPER CABLE FOR ABOVE SERVO 25 SQMM * 4 CORE (100 METER WITH LUGS )
SITC ELECTROMAGNETIC FLOW METER FLANGE ENDS, DISPLAY TYPE : INTEGRAL, POWER SUPPLY : 80-300 V AC, OUTPUT : 4- 20MA PULSE OUTPUT, PRESSURE RATING : 10 KG/CM2, DESIGN OF THE MEASURING SENSOR : FLANGE ANSI 150, FLANGE MATERIAL : CS/MS, ELECTRODE MATERIAL : SS316, MEASURING TUBE : SS 304, TEMP UPTO 80°C, WITH IIA, IIB, CMRI CERTIFIED with REMOTE READING AND MODEM, SIZE 150 MM
COMPLETE INSTALLATION AND TESTING AT SITE FOR PUMPS AND ACCESSORIES
CARTAGE AT SITE INCLUDING ROAD HEAD AND HEAD LOAD UPTO SITE
AT TUBE WELL -2
SUBMERSIBLE PUMP MOTOR SET, DISCHARGE 750 LPM AND HEAD 100 METER, 25 HP
SUPPLY ,INSTALLATION ,TESTING AND COMMISSIONING(SITC) ON TURNKEY BASIS FOR FULLY AUTOMATIC CONTROL PANEL WITH AUTOMATIC STARTER
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 100 AMP CHANGE OVER SWITCH IN STEEL SHEET ENCLOSURE
MAIN PIPING AND VALVES :- MS PIPE HEAVY DUTY 100 MM, THICKNESS 7.90 MM THICKNESS WITH FLANGES WELDED AT BOTH ENDS FOR INTERLOCKING ARRANGMNETS , OUTER CUT ON FLANGES FOR SUBMERSIBLE CABLE ALONG WITH PACKING AND NUT BOLTS (1 PIPE = 3 METER= 20 PIPE) ALONG WITH FOLLOWING :-
CAST STEEL SLUICE VALVE 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR BYPASS ARRANGEMENTS) • CAST STEEL NON RETURN VALVES 100 MM, CLASS 150 WITH FLANGES, PACKING AND NUT BOLTS (1- FOR DELIVERY LINE AND 1 FOR RISING MAIN) • 100 MM DIA MS BEND 900 Bend -2 Nos • 100 MM MS TEE : 01 NOS • MS DISTANCE PIPE 100 MM, 1.5 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 02 NOS • MS DISTANCE PIPE 100 MM, 1.0 MTR LENGTH WITH FLANGES WELDED AT BOTH ENDS : 01 NOS • MS NRV TAIL PIECE • MS TOP CASING COVER : 01 NO • NUT BOLTS, PACKING AND JOINTING MATERIAL : 01 SET
SUPPLY OF 02 TONNE WITH 10 METER CHAIN HEAVY DUTY CHAIN PULLEY
POWER WIRING AND EARTHING MATERIAL A. SUBMERSIBLE COPPER CABLE REQUIRED , SIZE 16 SQMM * 3 CORE : 120 METER B. POWER CABLE FROM MAIN TO SATRTER REQUIRED IS ALMUINUM ARM. 50 SQMM * 3.5 CORE : 80 METER C. LUGS AND JOINTING MATERIAL : 01 SET D. EARTHING REQUIRED FOR PUMP AND PANEL : 01 SET E. EARTHING REQUIRED FOR SERVO
GAUGES :- SUPPLY AND FIXING OF GAUGES AND FITTINGS PRESSURE GAUGE 100 MM DIAL SIZE OF 0-100 KG/ CM2-01 NO COMPOUND GAUGE 100 MM DIAL SIZE OF 0-1 KG/ CM 2 -01 NO. HEAVY DUTY CONTROL COCK-01 NO M.S. NIPPLE PIPES, ELBOWS ETC. REQUIRED FOR FIXING THE ABOVE GAUGES ON PUMP 01 SET.
ELECTRONIC CHLORINE DOSING SYSTEM COMPLETE IN 6 KG PRESSURE, 230 V WITH INSTALLATION, 100 LTR TANK AND CONNECT WITH STARTER COMPLETE
RUBBER INSULATION MAT
SITC OF SERVOKON MAKE ROLLING CONTACT SERVO VOLTAGE STABILIZER 50 KVA (3 PHASE) ISO CERTIFIED, SUITABLE FOR INDOOR USE, WITH STAND AMBIENT TEMPRATURE UPTO 55 DEG-CEL UNIT IS A COMBINATION OF THREE NO SINGLE PHASE AIR-COOLED UNITS IMMERSED IN ONE OIL COOLED TANK WITH SEPARATE CONTROL CIRCUIT FOR INDIVIDUAL CORRECTION IN EACH PHASE, COMBINATION SUITABLE FOR BALANCE- UNBALANCED SUPPLY AND LOAD, INPUT VOLTAGE: 280- 460 VOLT, OUTPUT VOLTAGE ; 415(+/-)1% TYPE : ROLLING CONTACT (LINEAR TYPE)
COPPER CABLE FOR ABOVE SERVO 25 SQMM * 4 CORE (100 METER WITH LUGS )
SITC ELECTROMAGNETIC FLOW METER FLANGE ENDS, DISPLAY TYPE : INTEGRAL, POWER SUPPLY : 80-300 V AC, OUTPUT : 4- 20MA PULSE OUTPUT, PRESSURE RATING : 10 KG/CM2, DESIGN OF THE MEASURING SENSOR : FLANGE ANSI 150, FLANGE MATERIAL : CS/MS, ELECTRODE MATERIAL : SS316, MEASURING TUBE : SS 304, TEMP UPTO 80°C, WITH IIA, IIB, CMRI CERTIFIED with REMOTE READING AND MODEM, SIZE 150 MM
Supply & Fixng a DG Set 400KVA with AMF, with complete earthing as required along with Power Cable
COMPLETE INSTALLATION AND TESTING AT SITE FOR PUMPS AND ACCESSORIES
CARTAGE AT SITE INCLUDING ROAD HEAD AND HEAD LOAD UPTO SITE
MITTAL MACHINES PVT LTD (BID ID -356868)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .