PROVN OF 02 NOS 50000 LTRS CAPACITY SWTS WITH ACCESSORIES AND 12 IN NOS LED STREET LIGHTS AT CGRA NALIYA UNDER AGE (I) CG JAKHAU

Amount

B/R PORTION

Excavation over area, n. exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

All as per item serial No 01 here-in-before but depth exceeding 1.5 m and not exceeding 3.0m complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance exe 250 m and not exc. 500 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for hardcore with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

M&L for precast PCC block masonry type in CM 1:5:8 with solid block of any size and set in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for RCC M-30 design Mix (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete etc. complete all as specified and as directed.

M&L for RCC M-30 design Mix (using 20mm graded stone aggregate) as in walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses foundations etc. complete all as specified and as directed.

M&L for RCC M-30 design Mix (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste formwork to faces of walls,retaining walls and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

Use and waste formwork to soffits of suspended slab such as roof slabs floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) in rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for formwork to fair finished surfaces of flat concrete, edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide etc complete all as spd and directed.

M&L for mild steel CRS bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

All as per srl item No 17 above but 6 to 8mm dia.

M&L for 10mm thick rendering in cement mortar (1:3), to fair faces of brick or concrete wall surfaces, mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for 10mm thick rendering in cement mortar (1:4), to fair faces of brick or concrete wall surfaces, mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only integral water proofing compound of approved make complete all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

S&F cast iron work grade FG 150, unmachined in brackets, gully traps, grating, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges and similar articles for each article exc 5 kg in weight complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide, zinc chrome primer complete all as specified and as directed.

S & F GI tubing 25 mm bore, medium grade with all fittings, laid in walls or ceiling / trenches complete all as specified and as directed. Note : Excavation & earth work if any required shall be measured and paid separately.

S&F stop valves/ angular stop valve, 25mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe.

S & F 25mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

E/M PORTION

Supply and fix steel tubular swaged poles type 410 SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and single swan neck, including foundation and coping complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and lay jointing and testing and commissioning of 16 Sqmm x 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches / ducts / laid under roads / paths / drain / culverts or passing through pipes complete all as specified and directed by Engineer- in- charge.

S&F FRP based outdoor type Junction box pole Hinged (L) mounted with clamps and including MCB SP 06 Amps complete all as specified and as directed. Make: Sintex Model No: GS JB 2817 or equivalent as approved by AGE(I).

S & F FR PVC insulated and PVC sheathed copper conductor cable, 3 core, 2.5 sqmm from junction box to light fitting complete all as specified and directed by Engineer - in - Charge

S & F 50 mm bore Galvanized Steel tubes, light grade with all fittings, fixing on pole for cable protection complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable, errection of poles/ struts etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil complete all as specified.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n exc 3.0 mtr indepth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, laying of cable, errection of poles/ struts etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M&L for dry sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to specified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment.

Supply & laying factory made unreinforced Precast concrete cable cover of class LV, type 1, flat, size 250 mm x 150 mm x40mm for protection for cable all as specified.

M & L for cement concrete PCC (1:4:8) type D2 using 40 mm stone aggregate for foundation bed of poles complete all as specified.

M & L for cement concrete PCC (1:3:6) type C1 using 20 mm stone aggregate for foundation filling and coping of poles complete all as specified.

M&L for cutting existing pipe 50 to 75 mm dia and taking branch connection of PP-R pipe of 50 to 75 mm dia by providing and fixing tee including cutting and making fusion joint etc. complete all as specified and directed by Engineer in charge

Supply and lay 3 layer (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 6 (PN-20) and PP-R plain fittings in trenches/walls /ceilings or laying in floors complete of size outer dia 50 mm, including fittings complete all as specified and directed by engineer in charge.

Supply and fix PPR Gate Valves (Brass Insert) of 50 mm bore complete all as specified and directed by engineer in charge.

Supply and lay jointing and testing and commissioning of 25 Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.

Supply & fixing of Monoblock pump set suitable for 415 V AC, 3 phase system having capacity 5 HP/3.7KW, suction pipe size 80 mm dia , delivery pipe size 65 mm dia complete with all accessories complete all as specified and directed by Engineer in Charge.

Supply, install, testing and commissioning Control Panel, Outdoor type, dust and vermin proof, totally enclosed, platform mounted, factory made having front openable shutter with locking arrangement made out of CRCA steel sheet 3.15 mm thick with MS angle iron frame work of size 40 mm x 40 mm x 6 mm thick, duly painted all as specified including necessary foundation bolts, PCC (1:2:4), type B-1 platform of suitable size for mounting the panel, suitable for 415 Volts, 50 Hz, three phase, 4 wire system complete with internal wiring with copper conductor and including the following accessories:-

(i) MCB TPN , 32 Amps, 'C' series, 415 volts, 50 Hz, rupturing capacity 10 KA, Make. L&T/Legrand/Schnieder - 01 No.

(ii) Digital Ammeter 0-50 amp - 01 Nos.

(iii) Digital Voltmetr 0-500 Volt - 01 Nos.

(iv) LED indicating lamps with colour Red, Yellow, Blue - 01 Set of three

(v) DOL starter three phase ML2 (heavy duty) suitable for 5 HP monoblock pump motor . Make L&T/Seimens/ - 01 Nos.

Supply and fix hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed by Engineer in Charge.

Supply and fix RRL hose of 63 mm dia and 15 meter length complete all as specified and directed by Engineer in Charge.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 3 Core , 6.0 Sq mm , 1100 Volts grade complete all as specified and directed by engineer in charge.

Material and labour for earthing complete with galvanized earth plate electrode in 60 cm x 60 cmx 6 mm thick buried directly in ground vertically at a depth not less than 2.25 meter below ground level with top edge of earth plate at depth not less than 1.5 mtr below ground level connecting to and including GI strip 25 mm x 4 mm by means of GI bolts, nuts, check nuts and washer light grade 40 mm dia GI protection pipe and connected to equipment, GI pipe medium grade 20 mm dia for watering an including funnel wire mesh, RCC pit cover and PCC 1;2:4 type B-1 including Rocksalt, charcoal, excavation and earth work disposal of surplus soil shown as plate No 3 of SSR part - I 1991 and all as specified complete. Note : - The unit rate quoted shall deemed to have included for GI protection pipe, GI earth strip up to 7.5 mtr, GI water pipe, wire mesh, funnel, excavation, RCC pit cover complete.

Supply and Fix galvanised steel water tubing, medium grade 80 mm bore for suction pipe, including necessary fittings such as GI bends,Tees, Union etc complete all as specified and as directed.

Supply and Fix galvanised steel water tubing, medium grade 50 mm bore for delivery pipe, including necessary fittings such as GI bends,Tees, Union etc complete all as specified and as directed.

Supply and Fix CI football for suction pipe 80 mm dia including necessary fittings complete all as specified and as directed.

M&L for cutting of black top road for laying of GI pipe and making good as per existing surface complete all as specfified and directed by Engr-in-Charge.

M&L for fabrication and fixing canopy for protection of centrifugal pump made out of 40x40x6 mm angle iron and 2 mm thick sheet steel confirming to Fe 290 Gde-E-165 having size of structure 75x60x180 cm and roof with slope of 10 degree, painting with two coat of primer and one coat of synthetic enemel paint incl necessary PCC work, fasteners , nut, bolt, washer etc complete all as specfified and directed by Engr-in-Charge.

Hari Construction

KALIKAY ENTERPRISES

TAKHUBHA KANUBHA JADEJA

NAVIN K LAKHANI

Vijay Construction Co

Venus Engineering