Construction, Testing and Commissioning of Halduchaur Doliya (MVS) Water Supply Scheme at Haldwani Block District Nainital.

Amount

Rising Main and its Appurtenant Works

Halduchaur Doliya.

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

Proposed TW to OHT (150mm dia) 5.6 mm thick

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

150 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Halduchaur Devram

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

Proposed TW to OHT (150mm dia) 5.6 mm thick

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

150 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Construction of 150 KL OHT At Halduchaur Doliya.

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of 150 KL and 12m staging with 1.00m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x1m R.C.C. landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and washout pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex.)/enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 and staging 12.00 meter.

Additional rates for staging per meter height beyond 12m height including cost of all material, labour, shuttering, scaffolding, T&P completed for following capacity (in KL) overhead tank including 11 m additional height. Total staging of 150.00 KL is 17 M.

Submission of Soil testing, Detailed Design and drawing from any recognized University such as I.I.T etc or Govt accredited firm/Lab as per direction of Engineer in -charge.

R.C.C. as per approved design including fixing various pipes and ventilator at top and fixing of M.S. sheet of 10mm gauge manhole cover of 60X60cm size with frame and locking arrangement and railing including supply of all material.

Two column R.C.C. stair case with 1.0 mtr minimum clear width attached with tank body as an access to balcony and top dome of tank from ground level as per design and drawing with 1.25m high railling and gate with cabin as per specification including supply of all materials.

Supply of fixing of M.S. Ladder form inside the tank body from room to the bottomdome of the tank in the slope of 3:1 (3vertical:1 horizontal) with railing as specified.

Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material, Railing shall be provided in three rows of G.I. pipes (medium Quality)

Supply and fixing of digital water level indicator along with all necessory equipment such as invertor a per specifications and fixing of lightening conductor and earth plate etc. as per specifications.

Testing of tank of water tightness as per specifications enclosed including supply of water.

Supply of all materials and construction of 80mm thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber.

Three coats of approved quality and shade of Apex Asian Paint for Painting of as per direction of Engineer in charge over concrete work including supply of all materials etc.

Three coats of anti corrosive/aluminum/black Japan paint of approved quality on all iron work including supply of all material, labor and T&P etc.

Supplying, carting and fixing of following sizes MSERW/D.I D/F pipes with required specials such as reducers, duck foot bend, (bell mouth etc. in inlet of tank) rubber insertion sheet, nut bolts, washer etc. complete as per specifications: a- 150 mm dia in inlet

b- 200mm dia in outlet

c- 200 mm dia in overflow

d- 100 mm dia in wash out

Supplying, carting and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. Specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications:

a- 150 mm da in inlet

b- 200mm dia in outlet

c- 200 mm dia in overflow

Supply of all materials labour T&P and construct brick masonry sluice valve chambers including R.C.C. cover as per deptt. Type design at inlet, outlet and washout pipes. The R.C.C. cover shall be casted in M.S. Channel section with handles on both sides.(Sluice valve chamber for over flow & wash out may be combined).

The words Jal Jeevan Mission, year of construction, capicity of O.H.T. and slogan approved by Engineer in charge shall be painted prominently in letter not less than 30cm. In height.

Maintenance of 12 months including supply of all materials etc complete. Maintenance period shall be counted from date of completion.

BOUNDARY WALL WORK

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Centering shuttering including struttings, propping etc. and removal of form work

Lean Concrete

IRON GATE WORK

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

M.S. work in heavy size such as build up gates doors, frames etc wrought to required from including drilling of holes revanting of welding share necessary and also including supply of steel bolts, nuts etc and their fixing required for proper completion of work

Acrylic smooth exterior paints three coats on pillars

Painting two coats of approved paint over one base (priming coat) on new surface of Gate and Pillars

Centering shuttering including struttings, propping etc. and removal of form work

For CC work

Construction of 50 KL OHT At Halduchaur Devram.

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of 50 KL and 12m staging with 1.00m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x1m R.C.C. landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and washout pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex.)/enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2 and staging 12.00 meter.

Additional rates for staging per meter height beyond 12m height including cost of all material, labour, shuttering, scaffolding, T&P completed for following capacity (in KL) overhead tank including 11 m additional height. Total staging of 50.00 KL is 14 M.

Submission of Soil testing, Detailed Design and drawing from any recognized University such as I.I.T etc or Govt accredited firm/Lab as per direction of Engineer in -charge.

R.C.C. as per approved design including fixing various pipes and ventilator at top and fixing of M.S. sheet of 10mm gauge manhole cover of 60X60cm size with frame and locking arrangement and railing including supply of all material.

Two column R.C.C. stair case with 1.0 mtr minimum clear width attached with tank body as an access to balcony and top dome of tank from ground level as per design and drawing with 1.25m high railling and gate with cabin as per specification including supply of all materials.

Supply of fixing of M.S. Ladder form inside the tank body from room to the bottomdome of the tank in the slope of 3:1 (3vertical:1 horizontal) with railing as specified.

Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material, Railing shall be provided in three rows of G.I. pipes (medium Quality)

Supply and fixing of digital water level indicator along with all necessory equipment such as invertor a per specifications and fixing of lightening conductor and earth plate etc. as per specifications.

Testing of tank of water tightness as per specifications enclosed including supply of water.

Supply of all materials and construction of 80mm thick R.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber.

Three coats of approved quality and shade of Apex Asian Paint for Painting of as per direction of Engineer in charge over concrete work including supply of all materials etc.

Three coats of anti corrosive/aluminum/black Japan paint of approved quality on all iron work including supply of all material, labor and T&P etc.

Supplying, carting and fixing of following sizes MSERW/D.I D/F pipes with required specials such as reducers, duck foot bend, (bell mouth etc. in inlet of tank) rubber insertion sheet, nut bolts, washer etc. complete as per specifications: a- 150 mm dia in inlet

b- 200mm dia in outlet

c- 200 mm dia in overflow

d- 100 mm dia in wash out

Supplying, carting and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. Specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications:

a- 150 mm da in inlet

b- 200mm dia in outlet

c- 200 mm dia in overflow

Supply of all materials labour T&P and construct brick masonry sluice valve chambers including R.C.C. cover as per deptt. Type design at inlet, outlet and washout pipes. The R.C.C. cover shall be casted in M.S. Channel section with handles on both sides.(Sluice valve chamber for over flow & wash out may be combined).

The words Jal Jeevan Mission, year of construction, capicity of O.H.T. and slogan approved by Engineer in charge shall be painted prominently in letter not less than 30cm. In height.

Maintenance of 12 months including supply of all materials etc complete. Maintenance period shall be counted from date of completion.

BOUNDARY WALL WORK For 40 Mtr.

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 60 m.

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Centering shuttering including struttings, propping etc. and removal of form work

Lean Concrete

IRON GATE WORK

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

M.S. work in heavy size such as build up gates doors, frames etc wrought to required from including drilling of holes revanting of welding share necessary and also including supply of steel bolts, nuts etc and their fixing required for proper completion of work

Acrylic smooth exterior paints three coats on pillars

Painting two coats of approved paint over one base (priming coat) on new surface of Gate and Pillars

Centering shuttering including struttings, propping etc. and removal of form work

For CC work

Haldu Chaur Dauliya MAIN DISTRIBUTION SYSTEM

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

G.I pipe conforming to I.S : 1239(part-1) medium duty(class-'B')

50 mm dia

65 mm dia

80 mm dia

100 mm dia

125 mm dia

150 mm dia

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

200 mm dia

5.6 mm thick

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

50 mm dia

65 mm dia

80 mm dia

100 mm dia

125 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road

Providing and Fixing Ultrasonic Water Flow Meter for Bulk pipelines inline type, flange end with Integral mounted, Flow rate and Totaliser display, Battery operated (with five year battery life) communication : UART/RS485, suitable against antifraud attempts etc. including all necessary fittings complete.

200 mm dia

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Shifting of FHTC's from old PVC line to new GI line. FHTC (Functional Household Tap Connection)

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site o fwork, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.

15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection.

Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection as Lump Sum

Haldu Chaur Devram MAIN DISTRIBUTION SYSTEM)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

G.I pipe conforming to I.S : 1239(part-1) medium duty(class-'B')

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.

200 mm dia

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

Replacement and reparing of exsiting pipeline and Valve.

Excavating in soil mixed with single boulders etc. requiring the use of specials T&P, if any, for pipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

G.I pipe conforming to I.S : 1239(part-1) medium duty(class-'B')

80 mm dia

100 mm dia

Dismantling of following dia screwed and socketed G.I.Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work (Note :- This item shall be paid with the condition that the recovered pipe from dismantling is reusable.)

Dismantling of G.I. pipes.

80 mm dia

100 mm dia

Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

80 mm dia

100 mm dia

Repairing of 50 mm to 150 mm dia GI/MSERW pipe line by Welding. Work including : (i) Earth work in Excavation, (ii) Dewatering of pit manually and cleaning of pipe line as lumpsum @ 1/2 Lab for half day. (iii) Earth filling with ramming 10% extra of excavation. and (iv) Repairing of pipe by 01 welder and 02Helper( Labour). including Labour charge, Material and T&P complete all in respect.

50 mm dia

65 mm dia

100 mm dia

150 mm dia

Replacement of existing valves :

C.I. D/F sluice valves confirming to IS: 14846-2000

80 mm dia

100 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road

Providing and Fixing Ultrasonic Water Flow Meter for Bulk pipelines inline type, flange end with Integral mounted, Flow rate and Totaliser display, Battery operated (with five year battery life) communication : UART/RS485, suitable against antifraud attempts etc. including all necessary fittings complete.

150 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Shifting of FHTC's from old PVC line to new GI line. FHTC (Functional Household Tap Connection

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site o fwork, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.

15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection.

Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection as Lump Sum

E & M work and accessories for tube-well work

Supply, Installation, Testing & Commissioning on turnkey basis for fully automatic pump automation control pannel of suitable for 1000 lpm 175 m head capacity having intelegent unit having" FIELD PROGRAMMABLE LOGIC CONTROLER based SCADA operated pump motor startRun Control Protactagainst faults automatically operated controle and management system" for supervisory control and data acquasition system at pumping water supply schemes & two year freeof cost AMC for warranty period of following dutiesas per specifications sheet enclosed &suaitable for integrationsin the existing system including cartage from works of manufactures up to site of work Capacity of suitable for 1000 lpm 175 m for 40 HP.

Supply and fixing of 400 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc at tubewell.

Main piping and valves as per specification.

Supply of 150mm dia Column pipe, 6.4 mm thick -

Supply and fixing of suitable 16 mm thick MS Flange for column pipe both end with fixing trangle support and cutting of groove for cable all complete with labour & T&P

150mm dia size column pipe clamps.

Supply of 3 Core flat submersible cable KSB make Conti Cable 3/35.0 sq.mm suitable for Submersible

S/F Tool Kits

Installation as per Directed by Engineer-In-Charge.

S.I.T.C pumping plants & Accessories for tube-well

Submersible pump set of 1000 LPM, 175 Mt. head suitable for 300mm dia Assembly operating at 3 phase 84Hz AC supply.

Supply installation testing and commissioning of three phase digital rolling contact survo voltage stablizer suitable for unbalance voltage and unbalance load including fixing of proper size copper lugs on input and out put cable both end at defferent sites on turnkey basis including five years cost free maintenance.

Input voltage 330-460 volts (phase to phase) capacity - 100 kva

M/S BANWARI LAL