13/2021-22

Amount

Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.

Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings

Providing and fixing 0.60mm thick pre painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating i.e. fixing with pre painted iron J or L hooks, bolts and nuts 6mm dia meter with pre painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i.e. fixing with pre painted iron J or L hooks, bolts & nuts 6mm dia & pre painted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters :-Enamel paint other than white :-

Brick work using common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks (Super Structure)

Half brick masonry in common burnt clay building bricks in :- Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks (Super Structure)

Demolition above G.L. up to floor two level including disposal of unserviceable materials within 20 meters lead and including cutting the necessary reinforcement and separating out from R.C.C. /R.B. works

Excavation in foundations, trenches etc., in earth work, lift up to 1.50 Meters stacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 meters. Pick work jumper work 50% each

Providing and laying cement concrete 1:4:8 (1Cement:4 Sand:8 graded stone aggregated) 40mm nominal size and curing complete excluding cost of centering and shuttering in foundation & plinth.

RR masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth i/c leveling up with CC 1:6:12 in cement mortar 1:6 in breast walls and retaining walls.

RR masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth i/c leveling up with CC 1:6:12 in cement mortar 1:6 in breast walls and retaining walls. Super structure above floor two level

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to floor two level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:5

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for melting the surface

Steel work riveted in built up sections including cutting, hoisting, fixing, in position and applying a priming coat of red lead paint In grating, Framed guards, bars, ladders railings, brackets & similar works.

Providing and laying cement concrete 1:5:10 (1Cement:5 Sand:10 graded stone aggregated) 40mm nominal size and curing complete excluding cost of centering and shuttering in foundation & plinth..

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles(wherever required) including rubbing and polishing complete with tiles of following shades:- in white

Precast terrazzo tiles 20 mm thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 10 mm thick cement plaster 1:3 (1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles

Providing and fixing 10mm thick anti skid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Providing and laying Duro stone vitrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying Duro stone vitrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing wood work in frames of door, windows, clestory, windows and other frames wrought, framed and fixed in position of sal wood

Providing and fixing wooden plank ceiling with overlapping each oher and jointing with wooden screws (frame work and cover fillets to be measured and paid for separately 12 mm thick 1st class

Providing wood work in frames of door, windows, clerestory, windows and other frames wrought, framed and fixed in position 2nd class Deodar wood

Providing and fixing paneled glazed and paneled and glazed shutters for door, windows, clerestory, windows including black enameled iron butt hinges with necessary screws 1st class Deodar wood 40mm thick

Providing and fixing paneled glazed and paneled and glazed shutters for door, windows, clerestory, windows including black enameled iron butt hinges with necessary screws 1st class Deodar wood 35 mm thick

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws. 1st class Deodar wood 40mm thick

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws. 1st class Deodar wood 30mm thicj

Providing and fixing bright finished brass sliding door-bolts with nuts and screws etc. complete. 300x15 mm

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete.200x10 mm

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete 150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete 125mm

Providing and fixing bright finished brass handles with screws etc. complete 100mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing bright finished hard draw hooks and eyes 100mm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partition etc with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In charge (cost of aluminum snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.

Polishing two coats with French polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler.

NITESH VERMA GOVT CONTRACTOR