Providing 160mm dia Pipeline from Autonagar ELSR to Gurunanak Colony Road (JAMAC Apartment) at 11th Division of VMC. 1st Call MP LADS

Earth work in excavated for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and brcking, removal of stumps and other deleterious material and disposal upto a lead of 50mts dressing of sides and bottem and backfilling intrenchs with excavated suitable material as per technical specification 305 MORD/304 MORTH

Cutting of C.C. surface including stacking of excavated materials for laying of pipe lines including all labour charges and necessary equipments as per the ditections of the departmental authorities.

Centrifugally cast (SPUN) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding taxes and duties. For 160mm dia

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) For 160mm dia

Supply and delivery of Quarry Dust filling from approved source including cost, seignorge charges and conveyance of all materials including all labour charges for filling, sectioning, watering and ramming etc., complete as per S.S

Manufacture, supply and delivery ,fabrication and errection at site MS Pipes and Spls. made with 10mm thick MS Plate including painting with one coat of redoxide ,two coats of anty corrosie paint including cost of material, cutting ,welding, bending, and fabrication charges, necessary earthwork including transportaion, loading, unloading,at work spot.as directed by the Dept. Engineer-in- chrge CED and other taxes, etc complete for 150mm dia

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). For 150 mm dia. x 15 mm thick

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties. For l bend 90 & 0.6 flange tail

Bailing out of water from Pipe line trenches with oil driven pump sets, including hire charges, fuel charges for driver & helper etc complete as directed by the departmental authorities.

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 150mm dia PN - 1.60

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces For 160mm dia

Construction of Masonary Sluice Valve pits suitable to the sluice valves of size 80mm as per TD No. 4/1941 complete as per S.S For 150mm dia including cost and coneveyance of all materials and labour charges etc., complete as directed by the departmental authorities.

Providing inter connection between to the existing pipe line and newly laid pipe line including of all necessary inter connection materials and washers and man mazdoorsetc., etc., complete as directed by the departmental authorities. For existing 250mm HDPE pipe line to proposed 160mm dia HDPE pipe