Repairs of Ashok Leyland Bell Hack Snow Plough Machine for the year 2023-24

Amount

Repairs to engine by way of extraction of engine with the help of crane from truck, dismantling of engine Head from Engine then extraction of worn out/damaged parts, then P/F of new parts i.e. , Cylinder liner-06 no., Valve inlet-02 no., Valve exhaust-02 no.,Gasket kit-01 no, seal crankshaft rear-01 no, seal valve inlet -02 no., valve guide inlet & exhaust-4 no, spring inlet & exhaust valve inner-4 no, spring inlet & exhaust valve outer-4 no, stud cylinder block to cylinder head-4 no, cylinder head releasing stud-4 no, fuel injectors-06 no, seal Timing case front cover-01 no, Tappet-12 no, screw tappet adjusting-12 no., nut tappet adjusting-12 no, Araldite tube-02 no, cotton cloth -03 kg, jain maker tube-01 no, diesel for washing of parts ,testing & idle running-50 lit. Assembling of the complete engine and testing on full load. The job includes cost of material and labour charges (Complete job)

Repairs to cutting frame by way of P/F of fabrication of cutting edge -04 nos of required length. Each, cutting edge bolt with nuts -16 nos, removing of minor bends of frame and welding of cutting frame edge where ever found required. Complete Job

Complete oil change of machine i.e. [engine oil-18 ltrs (15W40), Gear Oil- 10 liters (Ep 90), Differential Oil-24 liters (EP 120), Hydraulic Oil- 10 lites along with filter kit. Complete job. The job includes cost of materials, fuel for the journey of the machine from Divisional Office Doda to Repair Workshop and then back after conducting the repairs and testing, etc. & labour charges. Complete Job.

Repairs to Clutch System by way of P/F of spares / materials in place of defective / worn out parts of the vehicle by way of dismantelling of clutch system with P/F of new parts i.e. Clutch Plate- 1 No, pressure plate- 1No. Clutch Release Bearing- 01 No., Clutch release Fork-01 No., Shaft Bolt- 05 No. The Job Includes cost of Material and Labour Charges. Complete Job

Repairs to the electrical system of the machine by complete checking and replacing the damaged wiring, p/f of fused bulbs, L.T. wire, cabin lights, side indicators, front head lights, relays, bulbs with holders, speedo meter cable, also dismantling the dynamo assy., its cleaning with petrol, waste cloth, repairing by way of p/f dynamo plate, dynamo armature, carbon brush set, link set, spring set. Complete job including cost of material and labour charges

Repairs to the self-starter assy. 24V of the vehicle by dismantling it, cleaning/washing with petrol and extraction of worn out parts and then repairing by p/f of self-field coils, selfsolenoid switch, carbon brush set, rewinding of armature, bendix drive, shaft bush set. Complete job including cost of material & labour charges to execute the job.

Rebate against old parts.

KANT AUTOMOBILES

JAIN LUBRICANTS AND MOTOR SPARE PARTS