Supply and Delivery of water supply Materials to pipeline leakages and motor repairs at Various Places in Narayankhed Municipality under MGF/15thFC

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)

90mm dia 6.0 kg/sqcm

110mm dia 6.0 kg/sqcm

Laying and jointing of HDPE pipes in ready made trench by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.

90mm dia 6.0 kg/sqcm

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and Taxes. For Double Socket branch flange Tee, All Socket Tees, Reducers, Flanged Sockets, Flanged Spigot, Double Socket Duck Foot Bend, Double Flange Duck/Foot bend, all socket Cross, all Flange Tee, all Flange Cross, Double Flange Reducer, Blank Flange, Mechanical Joints, Double Socket Bends, Double Flanged Bends etc.

Upto 500 mm dia

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes.

PIPE ENDS LONG NECK OD 90 mm

PIPE ENDS LONG NECK OD 110 mm

MS FLANGES OD 90 mm

MS FLANGES OD 110 mm

REDUCERS OD 90 mm x 110 mm

BENDS OD 110 mm

END CAPS OD 90 mm

END CAPS OD 110 mm

M S Bolts / Nuts / Washers

Supply and Fixing Electro Fusion Tapping saddle complying with BS EN 12201-3-2011, PN 12.5 rating & WRAS approved raw material as per BS 6920, manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade compounded raw material for usage in drinking water system and having working pressure of 10 bar. The cost shall include testing of all materials, labour, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding of all taxes.

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.

Manufacture, Supply and Delivery of Cast Iron Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints conforming to IS No.8794 /1988 at site of work anywhere in T.G. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding all taxes. CL-15

Schedule of rate for supply of Rubber rings manufactured as per BIS: 5382/1988 with BIS Mark embossed per each set suitable for A.C* Couplings including cost of material, incidental, handling, packing, transportation and unloading at site transit risk etc., but excluding taxes. The Rubber Rings shall be tested at the factory premises conforming to B.I.S 5382/1988

Rewinding of Submersible pums motor up to and including……..HP, 3 Phase up to 1400 RPM of all types and makes with copper wire including minor repairs, lubrication of ball bearings, bush bearings and replacing condencer, screws etc testing of motor for original speed.