Providing RO Plant and Sump Well at NIDM in Kondapavuluru village of Gannavaram Mandal Est Cost RS:20.00 Lakhs

providing RO plant system including cost and conveyance of all labour charges and instalation etc.,for 2000 LPH with the following components including all taxes and two years maintenance period.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Sand filling in foundation and basement with watering and tamping including cost and conveyance of all materials and all labour charges etc complete

CC (1:4:8) mix using 40mm hbg metal including cost and conveyance of all metirials and all labour chargs etc complete. (Footings,Flooring and steps)

VRCC (1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc., but excluding cost of steel and its fabrication charges for Footings.

VRCC (1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc., but excluding cost of steel and its fabrication charges for Flooring

VRCC (1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc., but excluding cost of steel and its fabrication charges for Plinth & Cross Plinth Beam.

VRCC (1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc., but excluding cost of steel and its fabrication charges for Roof Beam.

VRCC (1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc., but excluding cost of steel and its fabrication charges for Roof Slab 150 mm thick.

Construction of super stucture with brick masonary in (1:6) using fly ash bricks including cost and conveyance of all materials, labour charges and seign. charges etc. complete. Basement , Step 1 & 2 Super Structure.

Cost and supply of steel FE 415 Including fabrication charges and labour charges etc., complete

Plastering in CM(1:5) mix 12mm thick including etc., of all materials and all labour charges etc complete

Flooring with ceramic tiles 8 to 10mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 600x600mm of is 13711,13712,13630 of any colour set over a sbase coat of Cm(1:8) 12mm thick over already laid cement concrete bed including peat cement slurry at 3.30kgs per sqm and jointing neatly with white cement paste to full depth of slabs laid on already taid cement concrete bed set over baseceat of C< (1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sqm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges filling joints neatly dressing of flooring stones etc.,

Painting to new walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50grms liter of approved brand and shade over a base coat of appropriate primer of approved brand, making three coats in all to give an even shade after throughly brushing the surface to remove all dirt and ramains of loose powered materials including cost and conveyance of all materials to work site and all operational incidental labour charges etc., completer., for finished item of work as per ss 911 for inernal wall (APSS No. 912)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) 54mm ODPipe - SDR 13.5

Earth work excavation in all type of soils with intial lead and lift etc complete Initial

Earth work excavation in all type of soils with intial lead and lift etc complete 2nd Mattu

CC(1:4:8)using 40 mm HBG metal icluding Cost and conveyance of the all materials etc complete.

Sand filling in foundation and basement with watering and tamping including cost and conveyance of all materials and all labour charges etc complete

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for bottom raft.

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Side walls

M30 grade concrete using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for TopSlab with .15 thickness.

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.

Accoproof plastering with CM(1:3),12mm thick including cost and conveyance of all the materials ect complete.

Cement plastering with CM(1:3),12mm thick including cost and conveyance of all the materials ect complete.

Snowcem painting including cost and conveyance of all the materials ect complete.

Cost and Supply of the material Man hole covers including with all incidental charges etc.,