Construction, Testing and Commissioning of Devla Talla Water Supply Scheme with Raising Main, Distribution Main and Distribution Pipe Line and Pump House, OHT At Capacity 300 KL and FHTC etc. at Haldwani Block District Nainital

Rates for CConstruction, Testing & Commissioning of Devla Talla Water Supply Scheme with Raising Main, Distribution Main & Distribution Pipe Line & Pump House, OHT At Capacity 300 KL & FHTC etc. at Haldwani Block District Nainital.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete. G.I pipe conforming to I.S : 1239(part-1) medium duty(class-'B') 50 mm dia

65 mm dia

80 mm dia

100 mm dia

125 mm dia

150 mm dia

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. 250 mm dia (5.6 mm thick)

300 mm dia (5.6 mm thick)

350 mm dia (5.6 mm thick)

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

Replacement and reparing of exsiting pipeline and Valve.

Excavating in soil mixed with single boulders etc. requiring the use of specials T&P, if any, for pipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete. G.I pipe conforming to I.S : 1239(part-1) medium duty(class-'B') 20 mm dia

25 mm dia

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work (Note :- This item shall be paid with the condition that the recovered pipe from dismantling is reusable.) Dismantling of G.I. pipes. 80 mm dia

100 mm dia

Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete. 80 mm dia

100 mm dia

Repairing of 50 mm to 150 mm dia GI/MSERW pipe line by Welding Earth work in Excavation Dewatering of pit manually and cleaning of pipe line as lumpsum @ 1/2 Lab for half day Repairing of pipe by 01 welder and 02 Helper( Labour) Earth filling with ramming 10% extra of excavation

Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main. 50mm-80mm

65 mm dia

80 mm dia

100 mm dia

125 mm dia

Replacement of existing valves :

80 mm dia

100 mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge. - for Nominal concrete 1:3:6 or richer mix.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Supply of bulk water meter (Ultrasonic Water flow meters) with battery operated ( including freight charge & all taxes etc.). GPRS Modem for Online monitoring, suitable to connect with Ultrasonic Water flow meters ( including freight charge & all taxes etc.). 50 mm

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Constructing masonry Chamber 150x150x150 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. :- With F.P.S. bricks

Shifting of FHTC's from old PVC line to new GI line. FHTC (Functional Household Tap Connection)

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materials, Carting from site store to site o fwork, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection. Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection as Lump Sum

PUMP HOUSE WITH ATTENDANT ROOM Construction Work :-

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation, trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. - Ordinary rock

Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) grade - All work up to plinth level

Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) grade of reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement. - All work up to plinth level.

Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) grade of Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. - for Thermo-Mechanically Treated bars

Centering and shuttering including strutting,ropping etc. and removal of form For foundation

For column

For beam

Slab, Chhajja

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand).

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) grade. - Apron

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. - New work (Two or more coat )

Finishing walls with exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

Chequered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand). - Medium shade pigment using 50% white cement, 50% ordinary cement

62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and fixing to existing door frames - 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitered and joined at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness.

The lock rail made up of ’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanized M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanized M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. - Using M.S. angels 40x40x6 mm for diagonal braces.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for window, ventilator and similar works. use angle, square bar, etc

Providing & fixing glass panes with putty and glazing clips in steel windows & ventilator all complete. With 4.0 mm thick glass panes.

Providing & fixing fly proof wire gauze to windows and ventilator with M.S. Flat 15x3 m and nuts & bolts complete. - Galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. - ISMB 300 x 140

Painting Steel work(doors, windows, etc.) with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture.

Water supply & sanitary installations :-

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external works. 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. for internal works. 20 mm dia nominal bore

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

20 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank

Excavation of earth below G.L. by manually or by mechanical means for laying of Sewers, Manholes, Gully pits, Chambers etc. in soil including extra excavation below inverts, trimming and dressing of sides, leveling and back filling of trenches by excavated earth in 20cm layers, watering and ramming the same including removal of surplus earth or other dismantled material upto a distance of 50 meters from the centre of trenches and cleaning of sites properly after completion of the work. Excavation by mechanical means shall be restricted upto 90 cm above invert levels at every point of excavation. Excavation from invert levels to 90cm above shall be done manually only. Soil mixed with moorum, shingle & kankar etc. using of any specials, T&P, if required. (95% of relevant quantity) 0.00m to 1.50m B.G.L.

Supply & Laying-Jointing of following dia R.C.C. S&S pipes with rubber gaskets to the site of work, lowering the same into trenches below ground level true to alignment, making the joints with rubber gaskets and with necessary spun yarn soaked in bitumen jointing with 1:2 cement mortar in coarse sand including cost of all jointing materials and testing etc. complete but excluding excavation and back filling of trenches upto ground level. (Class - NP3) 150mm dia 0.00m to 1.50m B.G.L.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Rising Main and its Appurtenant Works

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. Proposed TW to OHT, (200mm dia) 5.6mm thick

Excavating in soil mixed with single boulders etc. requireing the use of specials T&P, if any, forpipe line trenches including lift up to 50m and lead upto 30m with back filling, watering, ramming of excavated earth in the trenches.

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 carse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. :- With F.P.S. bricks

Over Head Tank With Staging and boundary wall works.

Supply of all materials, labour, T&P etc and construction of R.C.C. O.H.T. of 300 KL and 22m staging height including cost of all material, labour, shuttering, scaffolding, T&P completed for following capacity (in KL) with 1.00m wide R.C.C. stair case from G.L. to balcony and from balcony to top dome 1m x1m R.C.C. landing at suitable locations and railed with 3 rows of 20mm dia G.I. (M) pipe on 65x65x5 mm angle iron posts fixed with ladder, from top to the floor inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, over flow and washout pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex.)/enamel paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/SQM and staging 22.00 meter. Submission of Soil testing, Detailed Design and drawing from any recognized University such as I.I.T etc or Govt accredited firm/Lab as per direction of Engineer in -charge. R.C.C. as per approved design including fixing various pipes and ventilator at top and fixing of M.S. sheet of 10mm gauge manhole cover of 60X60cm size with frame and locking arrangement and railing including supply of all material. Two columns R.C.C. stair case with 1.0 mtr minimum clear width attached with tank body as an access to balcony and top dome of tank from ground level as per design and drawing with 1.25m high railling and gate with cabin as per specification including supply of all materials. Supply of fixing of M.S. Ladder form inside the tank body from room to the bottomdome of the tank in the slope of 3:1 (3vertical:1 horizontal) with railing as specified. Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material, Railing shall be provided in three rows of G.I. pipes (medium Quality) Supply and fixing of digital water level indicator along with all necessary equipment such as invertor a per specifications and fixing of lightening conductor and earth plate etc. as per specifications. Testing of tank of water tightness as per specifications enclosed including supply of water. Supply of all materials and construction of 80mm thick R.C.C. floor, apron and 15cm dia semi-circular drain around apron in a slope towards wash out chamber. Three coats of approved quality and shade of Apex Asian Paint for Painting of as per direction of Engineer in charge over concrete work including supply of all materials etc. Three coats of anti-corrosive/aluminium/black Japan paint of approved quality on all iron work including supply of all material, labour and T&P etc. Supplying, carting and fixing of following sizes MSERW/D.I D/F pipes with required specials such as reducers, duck foot bend, (bell mouth etc. in inlet of tank) rubber insertion sheet, nut bolts, washer etc. complete as per specifications: a- 150 mm dia in inlet b- 200mm dia in outlet c- 200 mm dia in overflow d- 100 mm dia in wash out Supplying, carting and fixing of following sizes D.I. D/F sluice valves as per relevant latest I.S. Specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications: a- 150 mm da in inlet b- 200mm dia in outlet c- 200 mm dia in overflow Supply of all materials labour T&P and construct brick masonry sluice valve chambers including R.C.C. cover as per deptt. Type design at inlet, outlet and washout pipes. The R.C.C. cover shall be casted in M.S. Channel section with handles on both sides.(Sluice valve chamber for over flow & wash out may be combined). The words Jal Jeevan Mission, year of construction, capacity of O.H.T. and slogan approved by Engineer in charge shall be painted prominently in letter not less than 30cm. In height. Maintenance of 12 months including supply of all materials etc complete. Maintenance period shall be counted from date of completion.

Boundary Wall Work

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Centring shuttering including strutting, propping etc. and removal of form work Lean Concrete

Iron Gate Work

Earth work in excavation by manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavation soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Ist class Brick work 1:6 in foundation including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

PC plaster with cement mortar in 1:6 (one cement and six local sand) minimum thickness 12 mm including raking of joint upto 1.27 cm 10 1/2 '' depth and also including supply of all materials labour T&P and require for proper completion of the work

M.S. work in heavy size such as build up gates doors, frames etc wrought to required from including drilling of holes revanting of welding share necessary and also including supply of steel bolts, nuts etc and their fixing required for proper completion of work

Acrylic smooth exterior paints three coats on pillars

Painting two coats of approved paint over one base (priming coat) on new surface of Gate and Pillars

Centring shuttering including strutting, propping etc. and removal of form work For CC work

PUMPING PLANTS & ACCESSORIES FOR TUBEWELL

Submersible pump set of 800 LPM, 175 Mt. head suitable for 300mm dia Assembly operating at 3 phase 84Hz AC supply.

Supply, Installation, Testing & Commissioning on turnkey basis for fully automatic pump automation control pannel of 50 HP capaciy having intelegent unit having" FIELD PROGRAMMABLE LOGIC CONTROLER based SCADA operated pump motor startRun Control Protactagainst faults automatically operated controle and management system" for supervisory control and data acquasition system at pumping water supply schemes & two year freeof cost AMC for warranty period of following dutiesas per specifications sheet enclosed &suaitable for integrationsin the existing system including cartage from works of manufactures up to site of work Capacity of 90 HP

Supply installation testing and commissioning of three phase digital rolling contact survo voltage stablizer suitable for unbalance voltage and unbalance load including fixing of proper size copper lugs on input and out put cable both end at defferent sites on turnkey basis including five years cost free maintenance. Input voltage 330-460 volts (phase to phase) capacity - 100 kva

Quotation For PVC insulated and PVC Sheathed Round Sheathed 4Core Bright Annealed Bare Copper Conductor Voltage Grade 1100 V AS Per IS 494/2010. Four Core Copper Cable for installation (50 Sq. mm armoured copper cable)

Supply and fixing of 400 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc at dewala talla tubewell.

Supply and fixing of 35 KVAR heavy duty power capacitor L & T make 440 volt 50 H box type.

Main piping and valves as per specification.

Supply of 150mm dia Column pipe, 6.4 mm thick -

Supply and fixing of suitable 16 mm thick MS Flange for column pipe both end with fixing trangle support and cutting of groove for cable all complete with labour & T&P

150mm dia size column pipe clamps.

Supply of 3 Core flat submersible cable KSB make Conti Cable 3/35.0 sq.mm suitable for Submersible

150mm dia C.I.D/F Sluice Valve.

150mm dia C.I.D/F Reflex Valve.

Nut bolts, rubber packing etc.

Lifting tackle 10 tonne capacity Chain pulley.

Electronic type liquid chlorine dosing system.

Liquid chlorine (50Kg Cane)

Gauges as per specification

Earthing Material

Installation.

Commissioning

Testing at site.

One month Trial Run/Maintenance

CONSTRUCTION OF 300MM DIA, 240MT. DEEP BORE TUBEWELL

Geohydrological survey of site before boring. Drilling of Bore by heavy duty direct rotary rig machine in Alluvial, Boulders, Pebbles, Rocky Stone, Sticky Clay etc. From Ground Level Upto 200m Depth Including Cutting, Welding etc.and lowering of slotted & Blind fincut MSERW pipes as per logging results.Supply and shrouding of pea gravels ,Development of tubewell by Air compressor and O.P unit of suitable capacity and all other accesories like tubewell cap,Girder set,bail plug etc.Testing of water for chemical and bacteriological parameters as per IS code 10500:2012 With Complete Materials, LaboursT & P Required for Proper Completion of Work for 300 mm dia linear

Transportation of suitable truck mounted rig machine, air compressor, OP unit, camp equipage ,connected T&P and necessary accessories, casing pipe ,tube well assembly housing pipe etc including loading, unloading creation and leveling of rig machine upto site of work etc complete in all respect as per direction of Engineer incharge required for drilling and development of TW.

Erection & Leveling of Rig machine at site of work.

Drilling of 550 mm dia bore by heavy duty direct rotary Rig machine in alluvial, boulders, pebbles, rocky stone, sticky clay etc from ground level upto entire depth for 300 mm dia linear assembly

Procurement of TW assembly as below (i) 300 mm dia MSERW pipe 7.90mm thick (a) Blind & Threaded

(b) Slotted & threaded

(ii) 300 mm Dia Bail Plug

(iii) 300 mm Dia MS well cap

(iv) 300 mm Dia MS clamp with nuts & bolts with Gurider

(v) Supply of pea gravel of size 1.6 mm to 4.8 mm

(vi) Sorrounding of pea gravels in between bore and tube well assembly upto entire depth of tube well ordered by the department.

Preparing & lowering of tube well assembly starting from G.L to the the required depth including cutting, welding as requied at site complete with all T&P required. (i) Fixing of 300 mm dia bail plug with Nut & U-bolt. (ii) Lowering of 300 mm dai MSERW housing pipe (Plan & Slotted pipe) as required.

(iii) Fixing of 300 mm dia, 8 mm thick tube well cap.

(iv) Fixing of 300 mm dia M.S.D.I. housing clamp..

Dismantling of Rig machine & Clearance of site after satisfactory completion of work.

Development of T/W by 350 PSI/1400 CFM air compressor unit to the satisfaction of Engineering in charge to give sand free discharge and proper packing of pea Gravels at least for 70 Hrs.

Development of T/W by the suitable submersible OP units complete with Lowering and lifting of pumping plant having 2000 LPM discharge approximate including running of OP unit and weld testing to tube well by V Notch atlteast for 60 Hrs to the satisfactory completion of work.