Amoda Co-operative Lift Irrigation Scheme Amoda Tal-Yawal Dist-Jalgaon Area - 1134 Ha

Amount

Preparation of current status report of Cooperative Lift irrigation scheme.

Item No:- 1 :- Preparation of report on current status of existing construction of all component of Lift Irrigation Scheme such as Jack well, rising main, anti surge system, delivery chamber, Pipe distribution system, current condition of electrical and mechanical components. (including photography and videography)

Item:- 2 :- To collect information about land acquisition, financial obligations on the scheme such as water bill, electricity bill, tax, recovery, loan etc. Prepare an aggregate report of all matters and submit the report to the department in six copies.

Item No:- 3 Determining the command area based on the old documents of the scheme as well as if there are any changes in the current field situation. To aprroved the command area from the competent authority. To prepare the documents in the prescribed format as required and to take action to publish the notification of the revised command area.

To get approval from competent Authority by conducting detailed survey.

Item No.4 :- 100 m X 100 m Block Survey of grid 10 m x 10 m for Pump house a including transfer of entire data to computer system in different georeferential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval & scale.

Item No.5:- Providing permanent bench mark dressed stone of basalt, granite or gneiss of size 30CmX30CmX45Cm at least 15Cm below the ground and embedding it to a depth of 30Cm in grade M-15 in situ concrete of size 90CmX90CmX60Cm deep over 1M deep foundation concrete of grade M-10 including excavation, concrete, providing and fixing dressed stone and backfilling the pit up to ground level with sand etc complete.

Item No.6:- Strip Survey for Rising main on falling contour including investigation of alternative line, taking falling contour fixing canal line, taking 'L' section and cross section on final line and distributaries survey etc complete. (Excluding fixing apex / chainage stones) including transfer of entire data to computer system in different georeferential layer / themes using features of standard plotting Software compatible with canal irrigation system design Software packages including contour plotting at specified interval & scale. Absolutely linear survey for all types of canals (Length of survey for L-section and cross sections to be measured separately for payment)

Item No- 7 :- Taking trial bore for detailed investigation with NX diamond drill double tube in all sorts of strata like soft murum, hard murum and boulders including all materials such as casing pipes, accessories, grease, steel boolsam and other such materials and or as required including conveying such materials and machinery to site of works, preserving the loose samples in glass/plastic jar and core samples serially numbered at site of work and conveying the same to the head quarter of concerned office and submission of detailed bore log sheet etc complete,as directed.

Item No.8:- Excavation for taking trial pits on final alignment of dam line and canal at specified interval and in Nalla-bed of size 2.00 x 2.00 x 2.50mtr. in length, breadth and depth respectively or size as may be directed by the Engineer In charge including back filling trial pits etc complete.

Item No.9:- Preparation of detailed construction plan for pipe distribution network system (primary distribution system main channel, secondary distribution system CADWM). including necessary command survey, linear survey etc Complete.

To make detailed design as per PDN hand book Volume 1 and 2 of Water Resources Department.

Item No. 10:- To study the present cropping pattern and propose new cropping pattern including discharge calculation as per new cropping pattern.and get approval from competent authority.

Item No-11 To get approval of the general layout of the scheme based on the discharge approved from competent authority and to make a detailed design and Vetting of the Scheme components such as Intake Structure, Pump House, Pumping Machinery, Electrical Component, Rising Main, Distribution Chamber, Design of Primary And Secondary Distribution system.

Item No- 12 To get approval for the design, to get necessary approval from the Standing Committee, Sub-Committee, Central design organization and Tapi Irrigation development Corporation and Subordinate Offices as well as Electrical and Mechanical department for the components of Lift Irrigation Scheme.

Item No- 13 :- To prepare detailled estimates of Civil, electrical and mechanical components as per the updated schedule of Rate and approved design. also to take action to get technical approval from the competent authority.

Item No-14 :- Preparation of detailed project report of the scheme as above. To check the project report of the scheme from the State Level Technical Advisory Committee, Nashik and submit it to the Government for administrative approval through Tapi Irrigation Development Corporation.

Item No:- 15 To submit the approved survey report, Design, Drawing (A0,A1,A2,A3,A4) Detailled project report, etc. in soft copy (editable) and hard copy (six copies ) as above.

Shireen Enterprises

SAMSWA PROJECTS LLP

WAVES TECH INDIA

SHREE KHAIRNAR CONSTRUCTION PVT LTD

Sau Manjusha Narayansinh Rajput

HYDROPNEUM SYSTEMS

Vilas Patil and Associates