Minor Miscellaneous work in Staff Quarters KASEZ Township at KASEZ, Gandhidham.

ABSTRACT OF COST

AMOUNT (Rs) AMOUNT (Rs)

S. No. DESCRIPTION

1 CONCRETE WORK 6,81,200.00 0.00

2 REINFORCED CEMENT CONCRETE 13,56,862.50 0.00

3 BRICK WORK 93,443.50 0.00

5 WOOD WORK & PVC WORK 27,72,603.75 0.00

10 REPAIRS TO BUILDING 1,40,125.00 0.00

11 DISMANTLING AND DEMOLISHING 3,22,551.00 0.00

12 PLUMBING WORKS 2,90,377.60 0.00

13 ALUMINIUM WORK 1,06,390.00 0.00

14 ELECTRICAL WORKS 17,13,736.36 4,55,983.00

TOTAL FOR DSR/ NS ITEMS 1,21,69,655.21 4,55,983.00

GRAND TOTAL : DSR/ NS ITEMS 1,26,25,638.00

GRAND TOTAL : DSR/ NS ITEMS 1,26,25,638.00

Digitally signed by SHUBHAM

NBCC (India) Limited

(A GOVERNMENT OF INDIA ENTERPRISE)

Minor miscellaneous work in Staff Quarter KAESZ township at KASEZ Gandhidham.

BILL OF QUANTITIES

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

1 4.1 Providing and laying in position cement concrete of specified grade excluding the

cost of centring and shuttering - all work upto plinth level.

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

CONCRETE WORK TOTAL 681200.00 0.00

REINFORCED CONCRETE WORK

2 5.1 Providing and laying in position specified grade of reinforced cement

concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural CUM 150.00 9045.75 1356862.50

sources : 3 graded stone aggregate 20 mm nominal size de rived from natural

REINFORCED CONCRETE WORK TOTAL 1356862.50 0.00

3 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in all

shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 10.00 9344.35 93443.50

BRICK WORK TOTAL 93443.50 0.00

4 8.2 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and

prepolished) machine cut for kitchen platforms, vanity counters, window sills,

facias and similar locations of required size of approved shade, colour and texture

laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with

joints treated with white cement, mixed with matching pigment,epoxy touch

ups,including rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

5 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

including machine polishing to edge to give high gloss finish etc.complete as per

design approved by Engineer-in-Charge.

8.3.2 Granite work metre 10.00 510.95 5109.50

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

6 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 SQM 150.00 1267.95 190192.50

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of

MARBLE WORK TOTAL 1033742.00 0.00

WOOD AND PVC WORK

7 9.1 Providing wood work in frames of doors, windows, clerestorey windows and

another frames, wrought framed and fixed in position with hold fast lugs or with

dash fasterners of requires dia & length ( hold fast lugs or dash fasterner shall be

paid for separately).

9.1.1 Second class teak wood CUM 0.50 142949.70 71474.85

8 9.21 Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part-

I) non-decorative type, core of block board construction with frame of 1st class

hard wood and well matched commercial 3 ply veneering with vertical grains of

cross bands and face veneera on both faces of shutters:

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary sqm 50.00 2172.10 108605.00

9.21.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished sqm 200.00 2093.70 418740.00

M.S. piano hinges with necessary screws

9 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum Sqm 50.00 462.35 23117.50

depth on all edges of flush door shutters (over all area of door shutter to be

10 9.46 Providing and fixing chromium plated brass curtain rod having wall

thickness of 1.25mm with two chromium plated brass brackets fixed

with C.P. brass screws and PVC sleeves etc., wherever necessary

11 9.79 Providing and fixing special quality bright finished brass cupboard or

ward robe locks with four levers of approved quality including necessary

screws etc. complete.

12 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or shade with nuts and screws etc. complete :

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

13 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade with necessary screws etc. complete :

14 9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or

shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade with necessary screws etc.complete.

9.101.2 Twin rubber stopper Each 10.00 72.35 723.50

16 9.109 Providing and fixing PTMT door catcher of length 72 mm and dia. of Each 50.00 40.05 2002.50

42 mm with suitable washers weighing not less than 33 gms

17 9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers Each 15.00 850.05 12750.75

without pair of handles of approved quality for aluminium door, with

necessary screws etc complete as per direction of Engineer- in-charge.

18 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /

ward robe shutters, including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type Each 50.00 52.50 2625.00

19 9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets Each 210.00 20.40 4284.00

shutter by with stainless steel rollers to run inside C or E aluminium

channel section (The payment of C or E channel shall be made

20 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a Rmt 180.00 492.70 88686.00

wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,

mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm

M.S. square tube, the vertical door frame profiles to be reinforced with 19x19

mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be

provided throughout the frame. The door frame to be fixed to the wall using M.S.

screws of 65/100 mm size, complete as per manufacturer’s specification and

direction of Engineering-Charge.

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

21 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame

made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for

styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture. M.S. frame covered with 5 mm

thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out

of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on

both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which

75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to

form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall

be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom

and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick,

20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame

welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm

wide PVC sheet beading on inner side, and joined together with solvent cement

adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on

the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as

per direction of Engineer-in-charge, manufacturer’s specification & drawing.

9.120.2 30 mm thick pre laminated PVC door shutters Sqm 70.00 3663.80 256466.00

Providing & Fixing decorative high pressure laminated sheet of plain

/wood grain in gloss / matt / suede finish with high density

protectivesurface layer and reverse side of adhesive bonding quality conforming

toIS : 2046 Type S including cost of adhesive of approved quality.

23 9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/

ventilators comprising of uPVC multi-chambered frame and mullion (where ever

required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized

mild steel section made from roll

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 sqm 10.00 8106.30 81063.00

x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of

appropriate dimension. (Area upto 0.75 sqm.)

24 9.169 Providing and fixing 19mm thick both side balancing lamination factory sqm 250.00 2593.15 648287.50

pressed BWP grade marine ply as per IS 710 of approved brand boxes,

shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws

etc. complete as per direction of Engineer-in charge.

25 9.170 Providing and fixing stainless steel fancy handle of approved make fixed with SS

screws etc. complete as per direction of Engineer-in- charge.

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

26 9.171 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges EACH 100.00 272.00 27200.00

(hydraulic type) of approved make/brand to cupboard shutters with full threaded

steel screws including making necessary recess in board and finished etc.

complete as per direction of Engineer- in-charge.

27 9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer one set 210.00 885.10 185871.00

channels of approved make 500 mm long with screws etc. complete as per

directions of Engineer- in-charge.

28 9.173 Providing and fixing ready made 304 grade stainless steel Modular KG 500.00 423.70 211850.00

kitchen basket and accessories such as right angle basket (Plain Cup &

Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil

basket, Dinner set basket, kitchen grain basket, Multipurpose basket as

per site requirement including finishing (wherever required) and fittings.

The same shall be fixed with necessary stainless steel nuts & bolts,

Stainless Steel screws & telescopic channel etc. as per direction of

Engineer-incharge. (For payment purpose only weight of Stainless steel

basket shall be considered excluding weight of all fixing accessories such

as nuts, bolts, fasteners telescopic basket channels etc. Payment of

providing and fixing telescopic channel shall be paid separately)

29 9.174 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding metre 500.00 43.80 21900.00

tape of approved quality for cupboard/wardrobe shutters including

necessary synthetic resin hot pressed to edges on binding machine

etc. complete as per directions of Engineer- in-charge.

WOOD WORKS TOTAL 2772603.75 0.00

30 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 5200.00 194.40 1010880.00

31 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,

fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 5000.00 172.60 863000.00

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

32 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, KG 100.00 772.40 77240.00

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top

of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, ( for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts, fasteners

STEEL WORKS TOTAL 1951120.00 0.00

33 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed

with grey cement slurry mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

34 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement including cement slurry,

but excluding the cost of nosing of steps etc. complete.

11.3.1 40mm thick with 20mm nominal size stone aggregate. SQM 100.00 614.20 61420.00

35 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or SQM 30.00 1439.40 43182.00

more (thickness to be specified by the manufacturer), of 1st quality conforming

to IS : 15622, of approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4

Coarse sand), including pointing the joints with white cement and matching

pigments etc., complete.

36 11.41A Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS : 15622, of approved make, in all colours and shades,laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the

joints with white cement and matching pigments etc., complete.

11.41A.1 Double charge vitrified tile polished finish of size

37 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by

the manufacturer), with water absorption less than 0.08% and conforming to IS:

15622, of approved brand & manufacturer, in all colours and shade, in skirting,

riser of steps, laid with cement based high polymer modified quick set tile

adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,

including grouting of joints (Payment for grouting of joints to be made

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

38 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy

grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of

hardener and 0.20 kg of resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

39 11.50 Deduct for not grouting the joints with white cement and matching pigment in sqm -50.00 13.30 -665.00

the items of fixing of vitrified tiles.

FLOORING WORKS TOTAL 239963.00 0.00

40 12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to

any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts

8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins,

rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel

rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under

approximately 2400 psi and hot cured. They shall be of uniform pigmentation

and thickness without air pockets and shall conform to IS 10192 and IS

12866.The sheets shall be opaque or translucent, clear or pigmented, textured or

smooth as specified

41 12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm .

in true horizontal level, suspended on inter locking metal grid of hot dipped

galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive)

consisting of main "T" runner with suitably spaced joints to get required length

and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at

1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm

center to center to form a grid of 1200x600 mm and secondary cross "T" of

length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to

be interlocked at middle of the 1200x600 mm panel to form grids of 600x600

mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main

"T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x

25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4

mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed width of

24 mm of all T-sections shall be pre-painted with polyester paint, all complete for

all heights as per specifications, drawings and as directed by Engineer- in-charge.

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard sqmt. 200.00 1528.00 305600.00

having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having

perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the

side borders of 30 mm, backed with non woven tissue on the back side, having

an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass

ROOFING WORKS TOTAL 1177555.00 0.00

FINISHING WORKS

42 13.1 12 mm cement plaster of mix:

43 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 SQM 150.00 537.45 80617.50

cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement :

3 coarse sand) finished rough with sponge.

44 13.16 6 mm cement plaster of mix:

45 13.62 Painting with synthetic enamel paint of approved brand and manufacture to give

13.62.1 Two or more coats on new work. SQM 150.00 226.25 33937.50

46 13.80 Providing and applying white cement based putty of average thickness 1 mm, of SQM 200.00 156.05 31210.00

approved brand and manufacturer, over the plastered wall surface to prepare the

surface even and smooth complete.

47 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC

content less than 50 gms/litre, of approved manufacturer, of required shade and

colour complete, as per manufacturer's specification.

13.41.1 New work (two or more coats) over and including water thinnable priming coat SQM 200.00 185.65 37130.00

with cement primer having VOC content less than 50 gms/litre

48 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre, of approved brand and

manufacture, including applying additional coats wherever required, to achieve

even shade and colour.

49 13.69 Polishing on wood work with ready mixed wax polish of approved brand and

50 13.85 Applying priming coats with primer of approved brand and manufacture, having

low VOC (Volatile Organic Compound ) content.

13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) SQM 100.00 70.35 7035.00

having VOC content less than 50 grams/ litre

FINISHING WORKS TOTAL 289985.50 0.00

REPAIRS TO BUILDING

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

51 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters

and under, including cutting the patch in proper shape, raking out joints and

preparing and plastering the surface of the walls complete, including disposal of

rubbish to the dumping ground, all complete as per direction of Engineer-in-

14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) Sqm 250.00 560.50 140125.00

REPAIRS TO BUILDING TOTAL 140125.00 0.00

DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by mechanical means including disposal

of material within 50 metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 50.00 1503.60 75180.00

53 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of Cum 50.00 3551.25 177562.50

steel bars and disposal of unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

54 15.7 Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

15.7.4 In cement mortar cum 10.00 2060.20 20602.00

55 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within 50

15.12.1 Of area 3 sq. metres and below Each 50.00 367.20 18360.00

15.12.2 Of area beyond 3 sq. metres Each 15.00 502.75 7541.25

56 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below Each 50.00 143.50 7175.00

15.13.2 Of area beyond 3 sq. metres Each 15.00 188.90 2833.50

57 15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 50.00 73.40 3670.00

15.23.2 For thickness of tiles above 25 mm and up to 40 mm sqm 50.00 113.35 5667.50

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

DISMANTLING AND DEMOLISHING TOTAL 322551.00 0.00

SANITARY INSTALLATIONS

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

59 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with

100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled device (handle lever)

conforming to IS:7231, with all fittings & fixtures complete including cutting and

making good the walls and floors wherever required.

17.1.1 White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral EACH 10.00 6767.40 67674.00

type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European

type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever), conforming

to IS : 7231, with all fittings and fixtures complete, including cutting and making

good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 10.00 6515.55 65155.50

61 17.7 Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls where required :

17.7.4 White vitreous china flat back wash basin size 550 x 400 mm with single 15 mm EACH 11.00 1879.20 20671.20

C.P. brass pillar taps.

62 17.8 Providing and fixing white vitreous china pedestal for wash basin completely EACH 5.00 1683.35 8416.75

recessed at the back for the reception of pipes and fittings.

63 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high EACH 10.00 168.35 1683.50

and 112 mm distance from wall of standard shape with bracket of the same

materials with snap fittings of approved quality and colour, weighing not less

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm

wide with minimum distances of 37 mm from wall face with concealed fittings

arrangement of approved quality and colour weighing not less than 88 gms

65 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported EACH 20.00 1083.50 21670.00

on anodised aluminium angle frame with C.P. brass brackets and guard rail

complete fixed with 40 mm long screws, rawl plugs etc., complete.

WATER SUPPLY INSTALLATIONS

66 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot and cold water supply, including all CPVC plain and

brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing.

This includes jionting of pipes and fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same including testing of

joints complete as per the direction of engineer incharge

concealed work, including cutting chases and making good the wall etc.

18.8.1 15 mm nominal outer dia pipes RMT 10.00 497.80 4978.00

18.8.2 20 mm nominal outer dia pipes RMT 20.00 537.60 10752.00

18.8.3 25 mm nominal outer dia pipes RMT 20.00 627.25 12545.00

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

18.8.4 32 mm nominal outer dia pipes RMT 20.00 739.30 14786.00

67 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

threaded fittings. This includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling and testing of joints complete as per direction

of Engineer in Charge.

18.9.2 20 mm nominal outer dia Pipes RMT 10.00 274.30 2743.00

18.9.3 25 mm nominal outer dia Pipes RMT 10.00 355.40 3554.00

18.9.6 50 mm nominal outer dia Pipes RMT 10.00 794.25 7942.50

68 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed ends):

18.17.2 32 mm nominal bore EACH 2.00 689.60 1379.20

18.17.3 40 mm nominal bore EACH 2.00 826.10 1652.20

69 18.18 Providing & Fixing ball valve (brass) of approved quality, High or low pressure,

with plastic floats complete:

18.18.3 25 mm nominal bore EACH 5.00 464.05 2320.25

70 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:

71 18.51 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

72 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS 8931 a) 15 mm nominal bore.

PLUMBING WORKS TOTAL 290377.60 0.00

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z sections

and other sections of approved make conforming to IS: 733 and IS: 1285, fixing

with dash fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,

mitred and jointed mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the directions of Engineer-

in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder KG 50.00 539.85 26992.50

coating 50 micron)

21.1.2 For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket required (Fittings shall be

paid for separately)

21.1.2.3 Polyester powder coated aluminium (minimum thickness KG 100.00 643.45 64345.00

of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in- charge . (Cost of

aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness Sq.m 10.00 1505.25 15052.50

ALUMINIUM WORK TOTAL 106390.00 0.00

ELECTRICAL WORK

[Q] SUB HEAD: WIRING : WIRING IN PVC CONDUIT

75 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

76 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper Point 57.00 1562.00 89034.00

conductor single core cable in surface / recessed medium class PVC conduit, 2

way modular switch, modular plate, suitable GI box and earthing the point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

77 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 90.00 334.00 30060.00

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

78 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

of FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required

1.14.4 2x 6 Sq.mm+1x 6Sq.mm earthwire Meter 340.00 439.00 149260.00

79 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor

.single core cable in the existing surface / recessed steel / PVC conduit as

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

80 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper Metre 255.00 47.00 11985.00

conductor PE insulated, shielded with fine tinned copper braid and protected with

PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

81 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required

82 1.24 Supplying and fixing following modular switch/socket on the existing Modular

plate & switch box including connection but excluding modular plate etc. as

83 1.25 Supplying and fixing two module stepped type electronic fan regulator on the Each 80.00 369.00 29520.00

existing modular plate switch box including connections but excluding modular

plate etc. as required.

84 1.26 Supplying and fixing two module blanking plate on the existing modular plate & Each 30.00 40.00 1200.00

switch box excluding modular plate etc. as required.

85 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front Each 160.00 477.00 76320.00

on surface or in recess, including providing and fixing 3 pin 5/6 A modular

socket outlet and 5/6 A modular switch, connections etc. as required.

86 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front Each 80.00 586.00 46880.00

on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A

modular socket outlet and 15/16 A modular switch, connections etc. as required.

87 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden Each 97.00 87.00 8439.00

block including connections etc. as required.

88 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes Each 110.00 119.00 13090.00

and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with

all accessories including connections etc. as required.

89 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete Each 17.00 99.00 1683.00

90 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down Each 30.00 213.00 6390.00

rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable etc. as required.

91 1.50 Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

92 1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as Each 160.00 110.00 17600.00

Digitally signed by SHUBHAM

DSR 2023 RATE (Rs.) AMOUNT (Rs.)

Sr. No. Description of item Unit QTY.

ITEM NO. DSR NDSR DSR NDSR

93 2.30 Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator)

94 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

95 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

96 Non-Sch. Supplying of pre-wired fittings complete with all accessories like choke, tube,

capacitor and starter as required.Tube light with fixtures and fittings complete

a) Supply Batten for LED tube light batten light fixture complete with 1x20W LED Each 110.00 271.40 29854.00

.nxt LED 20 Retro Bar Professional 111338 WH 6000K approved equivalent.

b) Supplying of 5 Watt/7 Watt /9 Watt LED Lamp as per required. Each 160.00 413.00 66080.00

97 Non-Sch. Supplying of ceiling fan 1200 mm. sweep 3 Nos. blade (white colour) including Each 80.00 2950.00 236000.00

all accessories, double ball bearing with 400 w electronic type fan regulator,

suitable for operation on 230 v single phase, 50 Hz AC supply etc. complete of

approved make as per site requirement.Crompton, Phillips, Orient etc. make

98 Non-Sch. Supply and fixing of DING -DONG BELL as per site required. Each 17.00 295.00 5015.00

99 Non - Sch. Supplying of exhaust fans of 300 mm sweep PVC Self opening louvers from Each 51.00 1534.00 78234.00

birds & rain water complete with all fixing accessories and suitable for operation

on 230 V single phase 50 Hz AC supply etc. complete of approved make as per

site requirement .

100 Non-Sch. Supply and fixing of 63 amp.-LT Change over switch. Set 17.00 2400.00 40800.00

101 5.4 Earthling with G.I earth plate 600mm x 600mm x 6 mm thick including Set 17.00 7472.00 127024.00

accessories, and providing masonary enclosure with cover plate having locking

arrangement and watering pipe of 2.7 meter long etc.with charcoal/coke and salt

102 5.7 Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for Meter 306.00 51.00 15606.00

conductor earth electrode ,including connection /termination with G.I thimble etc.

103 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Metre 52.94 244.00 12917.36

connections etc. as required.

ELECTRICAL WORK TOTAL 1713736.36 455983.00

Digitally signed by SHUBHAM