Repairs and replacement of UGD pipelines & Chambers and water Supply pipe lines to Block No.5,6,9 & 14 of RR-III Housing colony in New RR Peta 57th Division

Supply and Delivery of PVC/SWR pipe and Specials including Cost and Conveyance of all materials etc complete as directed by the departmental authorities

75 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G 11

110 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G 21

75 mm’ dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings BMW-G 58

110 mm dia - PLAIN Bend 87.5 Degree - UPVC/SWR Pipe fittings BMW-G 57

75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings BMW-G 70

110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings BMW-G 72

75 mm dia - Single 'Y' - PVC/SWR Pipe fittings BMW-G 82 with Door

75 mm dia - Coupler -UPVC/SWR Pipe fittings BMW-G 91

110 mm dia - Coupler -PVC/SWR Pipe fittings BMW-G 93

75 mm dia - Pipe Clip -PVC/SWR Pipe fittings BMW-G 104

110 mm - Pipe Clip -UPVC/SWR Pipe fittings BMW-G 106

75 rim dia - Rubber ring for Socket - UPVC/SWR Pipe fittings BMW- G 133

110 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings BMW- G 135

Rubber Lubricant- 250Grams BMW- G.141

250 ml - Solvent Cement BMW- G.147

Round Jali - UPVC/SWR Pipe fittings BMW-G 121

75mm dia -Door cap-UPVC/SWR Pipe Fittings bmw-G 127

110mm dia -Door cap-UPVC/SWR Pipe Fittings bmw- G 129

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice BMW- G.152

HIRE CHARGES FOR ACCESS SCAFFOLDING - up to 3.66 M using Casurina 3 Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for PLASTERING to WALLS - 1 sqm - 1 sqm (Wall Area)

Cutting of open of B.T. Road surface (as well as asphalt concrete up to 75mm thick) including water bound macadam including stacking of excavated materials for lying of pipe lines as per the directions of the departmental authorities.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Manual Means)

Providing concrete for plain concrete (M20 Nominal mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Engaging Labour on hire basis for cleaning the silt, Existing pipe dismantling and other unwanted materials from and lifting these in to tractors etc., complete as directed by departmental authorities.

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable. I.S.I Mark Basic Rate as per SSR (H.D-35 with 560mm dia clear opening)

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation to anywhere in A.P, excluding all taxes.For 200mm dia

II Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line). For 200mm dia HDPE pipe

Providing Jack hammer on hire basis including all charges as per the directions of the departmental authorities. LAB-00351

Earth work excavation and depositing on bank with an initial lead of 50 Mts and lift of 3 Mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipe line trench

Brick Masonry in CM(1:5) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete. For Chamber

Providing concrete for plain concrete (M20 Design mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH for Slabs

Bailing of water from the pipeline trenches with oil engine driver pump sets, including hire charges, fuel charges and wages for driver and helper etc., complete as per SSR as directed by the departmental authorities.

Engaging JCB with capacity of shovel of 0.85 Cu.m of 110 HP for Levelling the Site on hire basis including fuel charges, wages of driver and helper and all operational charges etc., complete as directed by the departmental authorities.For Sectioning

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Engining Hydraulic tractor on hire basis for loading of debris and shifting of debris to the desired place including cost of fuel and driver charges as directed by departmental authorities etc., complete as directed by departmental authorities.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outletsand over flow pipes but without fittings & base support for tanks (BMW-G.01)

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size BMW-F 27

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size BMW- F-25

Supply and Fixing of GI Fittings with stranded make including cost and conveyance of all materials etc,. Complete as directed by the departmental authorities

20mm dia X 6" GI Long Nipples

20mm dia X 4" GI Long Nipples

40mm dia X 12" GI Long Nipples

40mm dia X 6" GI Long Nipples

40mm dia X 4" GI Long Nipples

40mm dia X 3" GI Lona Nipples

50mm dia X 12" GI Long Nipples

50mm dia GI Unions BMW- F.06

40mm dia GI Unions BMW-F 05

40mm dia GI Elbows

50mm dia GI Elbows

40mm dia UPVC Tee

40mm dia UPVC Elbows

25mm dia UPVC Elbows

20mm dia UPVC Elbows

25X20mm dia GI Tee

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

54mm ODPipe - SDR 11 BMW-I.231

41.30mm ODPipe - SDR 11 BMW-I.230

28.60mm ODPipe - SDR 11 BMW-I.228

22.20mm ODPipe - SDR 11 BMW-I.227

Supply of 20mm PPR Clamp conforming to DIN Standards 8077/8092 BMW-I.411

Supply of 25mm PPR Clamp conforming to DIN Standards 8077/8092 BMW-I.412

Supply of 40mm PPR Clamp conforming to DIN Standards 8077/8092 BMW-I.414

40mm dia UPVC Couplings

50mm dia UPVC Couplings

Rubber Lubricant- 250Grams BMW- G 141

50mm dia PPR Ball Valves BMW-I 407

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessarry fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia BMW-1.415

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia BMW-1.416 For 54mm OD pipe