RMO of Elect. and Mech. Works Services at GPO Building Vikas Bhawan-II, Delhi. (Upgradation of existing Cisco make network system in connectivity Server room to ACB network).

Supplying, Installation Testing and Commissioning of Managed 24 port L2 switch compatible for 19" rack mountable 1U having minimum 2GB RAM and 1 GB Flash memory, through put of minimum 90 NPPS, with retardant hot swappable power supply, modules/SFP, fan tray and should support MAC address 16000, stacking with dedicated stacking/MLAG ports of 80 GBPS stacking bandwidth, stack minimum 4 switches, Minimum 4 number of uplink interface, +. Power Output Capability 30W per port simultaneously, Minimum 48 x 1000Base-T (from Day 1), 4 x 1G/10G Uplink Interfaces. Should be loaded with 2X10Gbps MM SFPs from Day 1, should support protocol support SVIs (inter VLAN Routing), Static routing, OSPF, PIM, IEEE Standards 802.1d, 802.1s, 802.1w, 802.3ad, 802.3x, 802.1p, 802.1q, 802.3, 802.3u, 802.3ab, 802.3z, 802.3ae, 802.3 , minimum 500 IPV4 routes, 500 IPV6 routes with IPv6 ready logo, 802.1x authentication and accounting, IPv4 and IPv6 ACLs, Dynamic VLAN assignment, IP Source Guard, 802.1x, DHCP Option 82 or equivalent, Dynamic ARP Inspection (DAI), MAC Limiting, Sticky MAC or equivalent, Proxy ARP, IPv6 Security IPv6 RA Guard, IPv6 DHCP Guard/DHCP Snooping, IPv6 Neighbor Discovery Inspection and IPv6 Source Guard, Access List/ Firewall Filters, QoS, IPv6, SSHv2, SNMPv2c, SNMPv3, NTP, RADIUS and TACACS+, Jumbo frame, Telemetry & Visibility using Netflow /jflow / sflow, SPAN, RSPAN, management functionality using open APIs/ NETCONF/RESTCONF using https/ YANG/ XML data models for external tools to automatically provision network resources / configuration or through https, switch should be EAL3/ NDPP/ NDcPP certified under Common Criteria OR should satisfy the TEC -ER /IR/GR standard complete with 1 Years Guarantee and software/firmware support etc complete as required.. (Make Cisco)

Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. i) 10 G SFP + Single Mode/Multi Mode (Make Cisco)

Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 μm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required. (Make Syrotech / Moolex / Derwiser)

Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, NonPlenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy identification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required. (Make-Molex / Panduit/3C3/ derwiser /Commscope)

1 Run of cable

Please Enable Macros to View BoQ information