System Improvement

Safe Cartage of following material from Store Centre Uttarkashi to near road site of work by pvt. truck with loading & unloading avg. distance 51 to 70 Km.

(i) ST Pole SP-21

(ii) Small Line Material

Head Load Cartage of following material from roadside to work sites avg. distance 1 to 3 Km

(i) ST Pole SP-21

(ii) Small Line Material

Dismantling of following LT line after roll of Conductor-

(ii) 2Ph 3W

(iii) 1Ph 2W

Dismantling of following LT Pole-

(i) LT Pole

Excavation of earth for pole pit of size 0.9*0.6*1.6 of full length of pole erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of single support pole in proper level and alignment alongwith fixing of all accessories.

(i) LT Pole SP-21

Grouting of pole in size 0.45*0.45*1.5 of the support in CC ration 1:4:8 block including cost of cement, sand and stone ballast back filling of soil and boulder in pit and ramming and proper alignment levelling as per RESPO construction manual.

Excavation of earth for stay pit of size 0.6*0.6*1.2 of full length of pole erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightning and nozalling of stay with pole and stay rod on required tention as per drawing.

(i) Stay Set LT

Grouting of stay in size 0.6*0.6*0.3 of the support in cc ration 1:4:8 block including cost of cement, sand and stone ballast back filling of soil and boulder in pit and ramming and proper alignment levelling as per RESPO construction manual.

Straingthing of tilted LT Pole with refitting of stay.

Laying, spreading & sagging of LT AB cable & making LT line with complete binding and jumpering.

(i) LT XLPE AB Cable 3C*70+50mm²

(ii) LT XLPE AB Cable 3C*35+25mm²

(iii) LT XLPE AB Cable 3C*25+25mm²

Earthing of pole with earth rod.

Laying and fixing of 1*25sqmm XLPE Cable for distribution box.

Fixing of distribution box with connection complete.

Disconnection & reconnection of consumer cable.

Route clearance of tree branches coming near LT line.

Back head load cartage of scrap material from work side to road side.

Back cartage of scrap material from road side to Rishikesh 180 Km.

Providing and fixing of following De-certralized material for the completion of the above Works.

Dead End Clamp with I-Hook and N&B insulated SP-23/21/10

Suspension Clamp with I-Hook and N&B insulated SP-23/21/10

Piercing Connector 70 Sqmm - 70 Sqmm.

Piercing Connector 70 Sqmm - 35 Sqmm.

Piercing Connector 70 Sqmm - 25 Sqmm.

Piercing Connector 35 Sqmm - 35 Sqmm.

Piercing Connector 35 Sqmm - 25 Sqmm.

Piercing Connector 25 Sqmm - 25 Sqmm.

PG Clamp for Neutral 50 - 25 Sqmm.

PG Clamp for Neutral 35 - 25 Sqmm.

PG Clamp for Neutral 25 - 25 Sqmm.

PG Clamp for Neutral 35 - 35 Sqmm./70 - 70 Sqmm./95 - 95 Sqmm.

1*25 Sqmm XLPE Cable

Stay Clamp with N&B SP-21

LT XLPE AB Cable 3C*70+50mm²

LT XLPE AB Cable 3C*35+25mm²

LT XLPE AB Cable 3C*25+25mm²

Al. lugs for distribution box connection 95 Sqmm/70 Sqmm/35 Sqmm for T/f

Al. lugs for distribution box connection 25 Sqmm

LT distribution box clamp

LT distribution three phase box

Sagar Engineering Company

VIKAS ELECTRICALS AND CONSTRUCTION