SHERVIDYAPEETH PUMPING WATER SUPPLY AUGMENTATION WORK

Rates for SHERVIDYAPEETH Pumping Water Supply Scheme(Civil and Electrical) work complete .Block- TARIKHET, District – Almora

INTAKE AND TREATMENT WORKS

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royalties etc. complete.

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) G.I. wire 10 Gauge BWG

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical ecificationsClause 802, 803, 1202 & 1203 of MORD Specifiction

RISING MAIN

Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. 40mm dia 4.0 mm Thickness

125mm dia 4.8 mm Thickness

125mm dia 5.6 mm Thickness

125mm dia 6.6 mm Thickness

125mm dia 7.1 mm Thickness

Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete.Assuming that 90%pipe line is laid in trenches ,it is estimated that 75% exavation will be in soil mixed with shingle,bajri&boulders and rest 25%will be in soft rock Soil mixed with boulder and bajri

Soft rock

Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete. Sluice Valve (P.N 1.60) 65 mm dia

125mm dia

Constructing stone masonry Chamber's of following sizes in cement mortar 1:6 (1 cement : 6 coarse sand) i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:4 (1 cement : 4 coarse sand) 20mm thick, as per standard design : Sluice Valve Chamber of size 1.20mx1.20mx1.20m

Gate/ Air Valve Chamber of size 0.60mx 0.60mx 0.60m

Cartage of following pipes, specials, valves and fittings from rail head Kathgodam up to site of work including loading, unloading and stacking complete.By truck distance pucca road

By head load distance in

Dismantling of Flexible Pavements by manual meansBituminous Courses

Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202.

Construction of anchor blocks

Welding Work for old existing MS ERW Pipe of different Dia

Protection Work (as detailed below)

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.50m in width or 10.0sqm in plan) including dressing of sides and ramming of bottoms, lift up to 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil.

Concrete with cement, coarse sand & 40mm gauge stone ballast in proportion 1:4:8 in foundation and floors including supply of all material, labour and T&P etc. required for proper completion of work, as per drawing and technical specification clause 802, 803, 1202 & 1203.

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification..

Providing cement concrete, nominal mix in 1:2:4 with cement, coarse sand & 20mm gauge stone ballast in open foundations, as per drawing and technical specification clause 802, 803, 1202 & 1203.

Distribution System

Providing of all materials, carting from site store to site of work, laying & jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete.15 mm dia.

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete.Assuming that 90%pipe line is laid in trenches ,it is estimated that 75% exavation will be in soil mixed with shingle,bajri&boulders and rest 25%will be in soft rock Soil mixed with boulder and bajri

Soft rock

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50.00m but excluding the cost of earth work.15 mm dia.

20 mm dia.

25 mm dia.

32 mm dia.

50 mm dia.

Relaying of dismantled G.I.Pipe in true alignment in trenches including supply of all materials,labour,T&P etc. complete. .15 mm dia.

20 mm dia.

25 mm dia.

32 mm dia.

50 mm dia.

Supply and fixing of the following fittings including cartage of materials, labours, T&P etc complete Gate valves (Class-I) as per I S 778/1997 20mm dia

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

Constructing stone masonry Chamber's of following sizes in cement mortar 1:6 (1 cement : 6 coarse sand) i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:4 (1 cement : 4 coarse sand) 20mm thick, as per standard design :Gate/ Air Valve Chamber of size 0.60mx 0.60mx 0.60m

Cartage of following pipes, specials, valves and fittings from rail head Kathgodam up to site of work including loading, unloading and stacking complete.By truck distance pucca road

Provision for FHTC works in revenue villages

By head load distance in

Supply and fixing of bulk meter of suitable size

Dismantling of Flexible Pavements by manual meansBituminous Courses

Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202.

Protection Work (as detailed below)

Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.50m in width or 10.0sqm in plan) including dressing of sides and ramming of bottoms, lift up to 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil.

Concrete with cement, coarse sand & 40mm gauge stone ballast in proportion 1:4:8 in foundation and floors including supply of all material, labour and T&P etc. required for proper completion of work, as per drawing and technical specification clause 802, 803, 1202 & 1203.

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification..

Providing cement concrete, nominal mix in 1:2:4 with cement, coarse sand & 20mm gauge stone ballast in open foundations, as per drawing and technical specification clause 802, 803, 1202 & 1203.

Clear Water Reservoir

Supply of all materials, labour and T & P etc. and construction of R.C.C. Sump / Clear Water Reservoir of following Capacity in K.L. as per type design and drawing including fixing of pipes and fittings including cartage of materials etc. Complete 10 KL

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil. Excavation for site development of sites for CWR

Protection Works as detailed below.

Random Rubble Stone Masonry laid in (1:6) cement and sand mortar, in breast walls, retaining walls etc. including supply of all material, labour, T&P and loyaltiies etc. complete.

Providing and laying in position cement concrete of spacified grade excluding the cost of centring and shuttering - all work upto plinth leval in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Old Reservior Repairing

Providing and laying in position cement concrete of spacified grade excluding the cost of centring and shuttering - all work upto plinth leval in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

20mm thick PC plaster in proportion of 1:4 with cement and sand over stone masonry, including racking of joints up to a depth of 1.27cm including supply of all materials, labour, T&P etc required for proper completion of work.

Supply of all materials, labour, T&P etc. and fixing of 60*60 cm MS, MH cover medium quality with handle, hinges & locking arrangements. (made of 3mm sheet & 40x40x5mm angle appx. Wt. 21 kg. including painting & cartage up to site)

Provision For Fixing of Intake & overflow Pipe's

GI barbed Wire Fencing with Iron Gate

White washing 3 coats including supply of all materials, labour, T&P etc. required for proper completion of work with slogan writing

REPAIR OF PUMP HOUSE

Steel work welded built of section /framed works including cutting fixing in position applying a priming code of approved steel primer using steel its as required in gratings, frames, guard bar, ladder, railing gates and similar works. Door Chaukhat & other works

Section window's

Provide 40 mm thick PCC flooring in 1:2:4 with cement, sand and 20mm gauge stone ballast mortar.

Provide 5mm thick glass strips on flooring 20mm deep.

Provide 15 mm thick plaster in 1:4 cement and sand mortar (Rough &.plain both sides)

Provide acylic smooth exterior paint (two or more coats) to give an even shade.

Painting on doors and windows (two or more coats) over and including one priming coat.

Supply and fixing of 4mm thick plane glass panes on window's including supply of nails and putty etc all complete.

Protection work

Earth work in foundation for retaining, breast wall's etc., in all type of soils, rocks including all lead, lift and disposal of surplus material as per direction of engineer-in-charge, as per drawing and technical specification clause 305.1 of MORD specification.

Concrete with cement, coarse sand & 40mm gauge stone ballast in proportion 1:4:8 in foundation and floors including supply of all material, labour and T&P etc. required for proper completion of work, as per drawing and technical specification clause 802, 803, 1202 & 1203.

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification.

Providing cement concrete, nominal mix in 1:2:4 with cement, coarse sand & 20mm gauge stone ballast in open foundations, as per drawing and technical specification clause 802, 803, 1202 & 1203..

miscllenious works for pumphouse & ALL CWR

Provision of 1.20 m wide M.S. Iron Gate with Pillars complete in all respect.

Provision of Drainage System consisting of following works

Barbed wire fencing

Supplying at site Angle iron post & strut 45X45X5 mm

Repair of 90 kl CWR

Construction of Sluice valve chamber at main tank

E&M WORKS

Provision for supply & fixing of new pump,starter & motor sets

Submersible pump & motor set 25 HP,800 LPM Discharge & 90 mtr

Auto Starter delta starter panel complete supply and fixing

Pump Set - Supply and fixing Centrifugal pump make Kirloskar (KSV) 10 Stages 2900 rpm , 340 mtr 750 LPM complete ,

Supply and fixing 100 HP Induction motor make kirloskar/ comptor/ABB 2900 RPM , 3 phase 4 pole 440 V 50 Hz

Auto Starter delta starter panel complete supply and fixing

Pump Set - Supply and fixing Centrifugal pump make Kirloskar (KSV) 10 Stages 2900 rpm , 90 mtr 150 LPM complete

Supply and fixing 10 HP Induction motor make kirloskar/ comptor/ABB 2900 RPM , 3 phase 4 pole 440 V 50 Hz

Auto Starter delta starter panel complete supply and fixing

Double regulation flat with connection 20 mtr

Nut bolt Tool Box and other necessary spare parts for maintenance of pump house and other foreseen material

Base Plate for Pump

Transportation charges

NRV valves 125 mm (PN -3.0)

NRV valves 40 mm (PN -3.0)

AUTOMATION SYSTEM FOR PUMP HOUSE

IRTU/PLC intelligent GSM based Remote Terminal Units of With analog and Digital Parameters and features as specified one each for 2 Pumps to store and transmit data on GSM backbone.

GSM based wireless communication hardware for RTUs capable to transfer data from remote site to MCS/LMS with all accessories.

Level transmitter as specified automatic 0-10 mtr

Intelligent Energy meter suitable for automation

Valve autuator for 80 mm dia valve

Auto phase reversal unit 100 HP-150 HP

Actuator Panels

Hard wired Timer circuit for actuators

Pressure transmitter

Isolation Transformer (440 V step down 220 V for Protection of site Electrical)

Over Voltage & Under Voltage Trip Protection (350 V- 450 V)

Electronic flow Metors for line Sizes of Automata/E & H/Nivo make for 80 mm line size with local electronic (display and set point facility)

2 Core Cable 1.5 mm

4 Core Cable 1.5 mm

10 Core Cable 1.5 mm

conduit pipe 1"

Accessories like conduct pipe flexible pipe, PVC bend,AC & DC relays with base, lugs etc.

Erection commissioning of all instruments and customization of software.

Operation and maintenance of pumping station by atomization

Labours needed for fixing automation system in pump house

Internal and External electrification of pump house.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of Piano type 5 amp switch on the existing switch board.

Supply and fixing of 3 pin 5/6 amp socket outlet on the existing switch board.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supply and Fixing of Double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required. (40A)

Supply and Fixing of bulk head light Bajaj/Philips/equivalent make

Supply anf Fixing of 40 W tube light complete in all respect (Bajaj/Philips/equivalent make)

Supply anf Fixing of 14 watt CFL on above fitted Holder (Bajaj/Philips/equivalent )

Supply anf Fixing of 23 watt LED external lighting luminaires with mounting bracket etc. complete.

M/s Kashmirilal Constructions Pvt. Ltd.