Renovation of toilet at KV school at AF stn Naliya

Amount

Sch A Part -I (B/R Portion) Taking down of cement plaster from surfaces of wall of any description including raking out joints, hacking out for key, scrubbing down with water etc including complete all as specified & directed.

M&L for rendering 15mm thick cement plaster in two layers with 10mm thick in cement mortar (1:6) as 1st coat and 5mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement as 2nd coat on brick or concrete wall surfaces, finished even and smooth without extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

M&L for preparing new plastered surfaces of walls and applying two coats of acrylic based paint (Exterior emulsion paint) over a coat of primer complete all as specified and directed.

Supply only Integral Water proofing compound.

M&L for rendering 10mm thick cement plaster on concrete surfaces of walls in CM 1:6, finished the surface even and smooth wihout using extra cement etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls, and applying 1mm thick wall care putty on wall and two coat of oil bound distemper over a one coat of primer complete all as specified & directed.

M&L for complete removal of existing treatment on walls of any description and preparing surfaces of walls and applying two coats of oil bound distemper over a coat of with alkali resistant priming paint over 1mm thick layer of wall putty complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster on concrete surfaces of ceiling in CM 1:3, finish the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for preparation of new plastered of ceiling and applying three coat of white wash complete all as specified & directed.

M&L for preparation of old surface of ceiling of any description and applying one coat of white wash complete all as specified and directed.

M&L for cutting and widening existing cracks not exc 10mm in depth in 'V' shape in wall and then filling in CM (1:3) including making good to facings complete all as specified and directed.

M & L for preparation of old plastered or unplastered surface of wall and applying one coat of acrylic based paint (Exterior Emulsion Paint) over a coat of primer complete all as specified and as directed.

Demolition of precast concrete articles and precast concrete block walling, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry walling with solid blocks of PCC (1:5:8) using 20mm graded stone aggregates, exc 10cm in width and set in cement plaster (1:6) complete all as specified and directed.

M&L for two coat of sythentic enamel painting on old steel painted sufaces including prearation of surfaces10 cm width or girth complete all as specified & directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc,laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified & directed.

M&L for glazed ceramic coloured tiles over vertical surface of wall, 450x350x7mm thick (or nearest size), set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

S&F for Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 20 mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F for Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe including taking up or down steel tubing and connections for 25 mm bore of pipe complete all as specified and directed.

M & L for removing old PVC/Cast Iron floor trap including wall crossing pipe and fixing with new outlet 75 mm PVC (SWR) floor trap with stainless steel grating and new wall crossing and filling with PCC (1:2:4) mixed with water proofing compound including matching with existing tile and jointed with outer pipe line with paste and connected to near manhole in ground floor complete all as specified & directed.

S&F in repairs 15 mm dia CP bib cock with flange complete all as specified and directed.

S&F in repair 15 mm dia bore Angle cock chromium plated cast copper alloy fancy decorative type with flange plate complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L in repairs, 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including PVC sheet cover with fixtures, black/ white closed pattern with flat bottom (excluding flushing cistern and flush pipe), including connection to drain (or out going pipe) complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern low level white with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to flushing pipe, ''P'' trap set in and including concrete and making good to floor complete all as specified and directed.

S&F in repairs, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Taking down chowkat or frame with shutter (Without Taking off shutter from frames) exc 1.5 sqm and n.exc 4 sqm and removing from MD land complete all as specified & directed.

Taking down chowkat or frames not exc 1.5 sqm each with shutter(without taking of shutters from the frame) and removing from MD land complete all as specified & directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous finecellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified & directed. (Note :- Door frame shall be waterproof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified & directed.

Supply & fix for anodised aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung) and glazing complete with 4.80 mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium(anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as shown on drg No. CEAA/64 all as specified and as directed (Make of Aluminium Sections powder coated : Jindal or equivalent of INDAL).Make :- Jindal, Hindal Co or equivalent

S&F for stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed.

S&F for 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed.

S&F for150 mm long aluminium, anodized barrel tower bolts of extruded section and fixed complete all as specified & directed.

Taking down PVC pipes including all fittings like shoes, bends, etc of any dia complete all as specified & directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipe, single socketed in any length rubber joints fixed to walls/trenches complete all as specified and directed.

M&L for RCC (1:1 1/2:3) Type A in slabs supported on walls, beams and columns in floors, roof, landing, balconies, deck slab complete all as specified & directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns , hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirmation to TMT bars complete all as specified and directed

S&F in repairs Vitreous china coloured WHB oval shaped counter top of min size 595x420x200 mm including, waste coupling, PVC waste pipe etc complete all as specified and as directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified & directed.

M&L 20mm thick Granite (of any type) pre-polished in cooking platforms and like fixed with neat cement slurry over 15mm thck cement mortar (1:4) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repairs 32mm dia waste coupling of CP brass for WHB fixed complete all as specified and directed.

S&F 20mm bore, gun metal or globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified & directed.

M&L in repairs, 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and directed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and directed.

M&L for rendering 10mm thick, in cement mortar (1:3) on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing in sunken portion complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base finished even and fair complete all as specified & directed.

S & F mild steel hold fast and similar small articles conforming to Fe 290-0 or E 165 complete all as specified & directed.

M&L for cement concrete type C-1 1:3:6 (by using 20mm graded crushed broken stone aggregate) for hold fasts complete all as specified & directed.

S&F in repair 2 in 1 health faucet with 1Mtr (braided tube) SS tube and hook complete all as specified & directed.

S&F in repair Corner glass shelf 300mm complete all as specified and directed.

S&F in repair glass shelf 300mm complete all as specified and directed.

S&F 600mm in size brass towel rack chromium plated complete all as specified & directed.

S&F in repair brass CP Towel Ring complete all as specified & directed.

S&F in repair brass CP Soap Dish ccomplete all as specified & directed.

S&F in repair brass towel rail complete all as specified & directed.

Sch A Part -II (E/M Portion) Taking down copper/aluminum wiring (light, fan, socket or power) complete and including (fitting and fixture such as switches, socket ,ceiling rose ,pendent ,regulators , etc to be measured separetaly) NOTE:- Job including for taking out old gutties,screw,nails etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.

M & L for point wiring one light/Fan point controlled by one switch complete with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl PVC ISI marked boxes of suitable size for mounting the switches , socket outlets , fan regulators etc all as specified and directed for following. Note :- PVC Box/ Ms cocealed box with laminated sheet will be fixed on requirment of site

Description all as per Srl item No. 66.00 here-in-before but one Switch socket 3 pin outlet 5 amp on independent board.

Description all as per Srl item No.66.00 here-in-before butOne 3 pin socket outlet 5 amp on the same board with other switches.

Description all as per Srl item No. 66.00here-in-before but with 2.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor and including provision of 2.5 sq mm PVC insulated ,multistranded copper conductor as earth continuity conductor connected to commen earth, for 15 amp ind board

S & F switch piano flush type single pole one way 5 amp.

S & F switch piano flush type single pole two way 5 amp.

S & F ceiling rose three Phase/PVC polycarbonate, isolated body complete all as specified.

S/F switch socket combination 2 in 1, 3 pin 5/15 amp flush type.

S&F switch socket combination 2 in 1,5 amp flush type.

S&F socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type.

S&F MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as specified and directed.

S&F in replacement of MCB single pole and neutral 40 amps, 240 Volts, complete all as specified and directed.

S&F in replacement of MCB 6 to 32 amps single pole 240 Volts, complete all as specified and directed.

S&F LED Batten for LED tube light with 01 Nos of LED tube 18 Watt fixed on two Nos of Square Block with twin core copper flexible wire and incl taking down old type tube light fitting etc complete all as specified and directed.

S&F LED plastic batten with white acrylic cover with 01 Nos LED tube 10 Watt Watt fixed on two Nos of Square Block with twin core copper flexible wire and incl taking down old type tube light fitting/holder any type etc complete all as specified and directed.

M&L for replacement of lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified & directed.

S&F in replacement of LED street light fitting 15 W with pressure die cast housing along with prismatic polymer carbonate diffuser and LED with secondry optic with IP 65 protection, including provision of GI pipe light grade of suitable size bent to the shape fixed in the wall with two nos of clamps,nut,bolts,screw etc and taking down old UNSV street light fitting any type complete all as specified and directed.

S&F in replacement sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed.including taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.

Supply and fix exhaust fan 300 mm size single phase 230/240 V complete with louver fixed in wall with nuts and bolts by making of suitable arrangement and making good including taking down old exhaust fan by removing all electrical cxonnection. Note :- Unserviceable Exhaust fan will be diposited at MES store Yard.

S and G Construction

NILESH SUBHASH KARALE