Provision of PHED Water Supply from Khariar Road Town to new Buildings CHC Khariar Road Near Gotma Air Strip

Soil testing , design ,drawing ,Construction & Commissioning of 1 no 1.5 Lakh liter Capacity Clear water UGR with all valves, fittings & piping arrangement of UGR up to 5 Mtr from external face., all complete.

Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete.

150mm dia D.I. Class-K-7 pipe

90mm dia GI Pipe

Supplying all materials, labour and T & P etc. and laying in trenches, centrifugally Ductile ( spun ) Iron pressure pipes conforming to I.S : 1536 of the following nominal diameter and Class as per specification and direction of the Engineer-in-charge including Cost of Pipe, transportation of all materials to site, all complete. 150mm dia D.I. Class-K-7

Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete.

Supplying all materials, labour and T & P etc. and fixing Cast Iron Sluice Valve with double flanged ends & cost of Nut, Bolt, Rubber insertion etc. for water works purposes for the following rating and nominal diameter as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 150mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC/ Vag/ TALIS) - Non Rising Spindle Type

Fixing of 25mm diaSingle Air Relief Valve conforming to IS-14858 : 2000 for water works purposes for the following diameters including drilling the water main ( Cast Iron Pipes with metal straps) as per specification.

Supplying all materials, labour and T & P etc. for Push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using Rubber Gaskets Conforming to I.S 5382 or S.B.R quality including testing of joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 150mm dia. Rubber Tyton joint

Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete.

Transportation by Truck / Tractor up to 05 km lead (DEBRIS & SURPLUS EARTH ) , including loading unloading and spreading etc. all complete.

Cutting of existing C.I / D.I pipe and inserting a special including earth work in excavation and making good the damages as per direction fof EIC, all complete.

100mm to 250mm dia

300mm dia

Specials

300mm x 300mm x 150mm "Tee"

300mm dia MJ (Mechanical Joint)

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 150mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 250mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice Valve Chambers of inside size 1.0mx1.0mx1.50m

Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete.

MS Pipe cost 150mm dia. (4.5mm thick)

MS pipe cutting 150mm dia.

MS pipe welding 150mm dia.

Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete.

Cost of MS Flanged 150mm dia. MS Flange (10mm thick MS Plate)

Providing and laying in trenches galvanized mild steel tubes (Mediumgrade) conforming to IS:1239/2004, Part-1 of the following nominal bore and tube fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)

Providing and fixing to wall or ceiling and floor galvanized mild steel tubes (medium grade) conforming to IS: 1239/2004, Part-1 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification.

Supplying all the materials T&P labour for Construction of Sunken Pump House having Plinth Area 6.0m x 4.0m. At New CHC Khariar Road.

Installation , testing and commissioning of HSC type centrifugal pump sets (Horizontal Splitcase pump with Horizontal Squarrelcage TEFC, LT Motor) having H-45.0m, Q-162.00 Cum / Hr (45 LPS ) conforming to IE-S standard of reputed make such as KIRLOSKAR / BCH / SIEMENS / GRUNDOS / MATHER PLATT including of all taxes and transportation to site at Bhawanipatna as per direction of Engineer-in-charge. (At New CHC 02 Nos ) ( 15 HP x 02 Nos.)

Installation, testing and commissioning of ATS Control Panel, as per direction of Engineer-in-charge.

Installation, testing and commissioning of Feeder Panel as per direction of the Engineer-in-charge.

Supply and fitting , fixing of 35 Sqmm x 03.5 core Aluminium Armoured Cable (Polycab/Havells or equavalent Make) confirming to IS: 7098(Part-1) 1988.

Supply and fitting , fixing of 25 Sqmm single core FRLS Insulated Bright Annealed Copper Conductor (Polycab/Havells or equavalent Make) confirming to IS: 694/2010.

Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete.

MS Pipe cost 150mm dia. (4.5mm thick)

MS pipe cutting

MS pipe welding

Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete.

80mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/r/AVK/Vag/Talis)

80mm dia. Non Return Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/r/AVK/Vag/Talis)

Cost of MS Flange 80mm dia. MS Flange

Suppying all material, labour, T&P for crossing of M.S. pipe line across NH-353 by Horizontal Thrust boring/pushing method (in slope of 1 in 40 towards downstream) including encasing the pipe line by 350 mm dia including excavation of Push Pit, dewatering if any, laying & joining of casing & carrier pipe, capping & sealing casing pipe etc for carrier pipe & nstallation of sign boards on either side of railway track (BS 105:GUIDELINES ON PIPELINE CROSSINGS UNDER RAILWAY TRACK) & direction of Engineer-in-charge & approved by Railway Department /State Works Department etc all complete.

Supplying all materials, labour and T&P for Providing M.S pipes of all classes conforming to IS:3589 & IS:3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO: 8501-1 followed by 500-700 micron two component 100% solid solvent free liquid epoxy coating all complete as per AWWA-210-07 and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.

Supplying all materials, labour and T&P for Providing & fixing High Density Polythylene spacers between casing & carrier pipe to avoid contact 2.5m c/c all complete as per specification (BS 105;GUIDELINES ON PIPELINE CROSSINGS UNDER RAILWAY TRACK/) and direction of Engineer In-Charge.

Supply of electricmagnetic full bore type IP 68 fully welded flanged type water flow meter of Pulse DC type of flow tube SS304 , coll housing & electrode SS316, SS ring type grounding etc. with IP68 siginal converter remote mounting ,input power supply 24V DC 4ma programable LCD display to show actual flow rate, totalised flow, flow direction , flow velocity , conducting with + or 0.5% accuracy etc. and provision to diagnostic empty pipe direction coil temperature , coil resistance etc. and comportable to data communication models with masibuts & communication the data to remote scada station for live monitoring whereever required including providing data cable and power cable required as per site condition . The standard caliberation certificate & gurantee certificate for flow meter & electromagnetic siginal converter to be given for minimum one year for the data of installation . The approve make (ABB, Krone, immerssion, Bermade E&H) including cost of material with all taxes transportation to site/storage with insurnace. 150mm dia Full bore type Electro Magnetic Water Flow meter for Pump House near New CHC.

Supply with fitting & fixing of D.I Mechanical dismentalling joint for use to main uninterrputed water supply in the pipeline in case eof repair of Flow Meter as per specification and direction of the Engineer-in-charge.

Supply with fitting and fixing of D.I fittings for use to main uninterrupted water supply in the pipeline in case eof repair of Flow meter as per specification and direction of Engineer-in-charge.

Flame cutting and facing of MS Plate or pipes upto 8mm thick including supply of all labor material, tools & plants for following plate thickness all complete as per specification and direction of Enginner-in-charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS Pipes and fittings at site by using welding generator including testing of joints as per specification complete.