Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L1 | Accepted-AOC LOWEST AND REASONABLE RATE | |
| 2 | L2₹39.7 L+₹31,480 (0.80%)Rejected-Finance | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹40.6 L+₹1.2 L (2.97%)Rejected-Finance | L3 | Rejected-Finance HIGHER RATE |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY
BHUJ
CERTAIN BR WORKS TO VARIOUS BLDGS OF POCKET C UNDER AGE BR II OF GE ARMY BHUJ
2024_MES_648723_1
8200
Open Tender
Civil Works
Item Rate
270 days
GE ARMY BHUJ
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE ARMY BHUJ
₹90,000
Yes
22 Jun 2024
30 Mar 2024
27 Apr 2024
30 Mar 2024
25 Apr 2024
12 Apr 2024
Amount
Taking down existing chowkats or frames of any description and in any position exceeding 1.5 sqm n-exc 4.0 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.
Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.
Resecuring or easing & adjusting of shutters without taking down of any description exc 1.0 Sqm each but n. exc 2.0 Sqm each complete all as specified and directed.
Resecuring or easing & adjusting of shutters without taking down of any description n. exc 1.0 Sqm each complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coated aluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window & Ventilator shutters side hung type aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e.. handles, barrel tower bolts, hinges etc, powder coated aluminium snap beading, screws etc. complete all as specified and directed Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
M&L for Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified Note : Panel filling i.e.. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
S & F 3mm thick figured glass ,pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc all as specified.
S & F Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40mm (weight not less than 600 gms /sqm )and fixed with aluminium wire staples/iron and wooden beads etc complete all as specified and directed.
S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as directed.
S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and directed.
S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .
Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clip and providing and fixing new ones complete all as specified and directed.
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including taking down old one.
S&F in repair 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .
M&L 2nd class hard wood (well seasoned) plain fillets, square, rectangular or triangular in section area exc 13 Sqcm and n.exc 25 Sqcm and secured with nails complete all as directed.
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed.
M&L for PCC (1:2:4) type B-0 (using12.5 mm graded stone aggregate) as in holdfast block etc complete all as specified and directed.
S & F aluminium anodised floor door stopper 140 mm long
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed
M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces/stone masonry and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.
M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar
Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick screed bed or bedding layer of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone slab 20-25 mm thick as in riser/skirting laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including, grinding, rubbing and polishing over 10 mm thick bedding in cement mortar (1:4) complete all as specified and directed.
M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd (and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction Stage 5:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.
M&L Plain cement concrete 1:4:8 type D-2 as in mass filling in sunken portion complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L glazed coloured ceramic tiles in vertical surface of size 450x300x7 mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match for surface of tiles, over 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick as in skirting fixed over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
Taking down steel window and fixing in same opening after making serviceable by welding , providing hinges and peg stay, PCC for holdfast etc including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete and making good the disturbed surface as directed by Engr-in-charge.
S & F butt Hinges, medium weight, stainless steel, 100 mm size complete all as specified.
M & L for powder coated aluminium grill of design No DG-104, 7.5mm thick sections of deco grill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed by Engr in Charge.
M & L in repair for Curtain rod, powder coated aluminium alloy of 25mm dia pipe decorative finish with and including supply and fixing powder coated decorated type brackets, stops, rollers etc. fixed on walls with brass screws with PVC rawl plugs as in curtain rods complete all as specified and directed.
Preparation of old painted surface of concrete and concrete based materials of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge.
Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying one coat of white wash , complete all as specified and directed. by Engr-in-Charge
Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.by Engr-in-Charge
Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M & L for one coat of colour wash on wall complete all as specified and directed.
Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for applying one coat of cement base paint including watering and curing of surface adeqautely before and after application of cement base paint complete all as specified and directed.
Preparation of old decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface M&L for applying one coat of distemper oil emulsion paint white or tinted complete all as specified
Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. .
Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying external wall care putty in two layer 1mm thick and making surface even and smooth to receive external emulsion and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as Specified and directed.
M&L for writing letters or figures using fluorecent paints (Block, Roman, Italic or Indian) n exc 30 cm high over and including black painted surfaces (back ground) complete all as specified and directed.
M&L for stops , commas shortlines dashes hypens brackets using fluorecent paints etc complete all as specified and directed.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scrapers or any other mean including filling depressions of scrapped surface with putty and preparation of surface for further treatment and M&L for two coats of distemper oil emulsion white or tinted over a two coat of wall care putty on walls complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position in beams, columns chajjas and similar items complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .
M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.
M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Providing & applying Rising damp-proof coating system with Single component ready to use damp-proof coating Roff Hydamp : 1.SURFACE PREPARATION: Thoroughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc. All large voids or hollow portions must be removed and re-plastered. Non- moving cracks having width upto 5 mm must be filled with Polymer based crack filler. 2 APPLICATION: Apply the first coat of Dr Fixit Dampguard Classic with a paintbrush directly on the prepared surfaces by mixing ( 1 part base:1 part hardner: 1 part of water) . Allow to dry for a minimum 2-3 hrs. Apply one part of DAMPGUARD mixed chemical and 2 parts of OPC white cement/Birla Putty and make the Putty, apply Putty on the entire surface area. Allow it to dry for at least 3-4 hours. Apply the Final coat of Dr Fixit Dampguard Classic on the entire surface and allow the surface to air cure 48 Hrs proceeds to paint.
Dismantling asbestos cement corrugated or semi corrugated sheet in roof coverings complete complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A,complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws as specified all as specified and as directed.
Excavating in post holes in soft /loose soil (or Similar holes) each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance exceeding 50 m and making good surface complete all as specified and directed.
M&L cement concrete type B2 (1:2:4) using 40 mm graded stone aggregate as in foundations filling for post holes and mass concretecomplete all as specified and directed.
Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs of RCC roof and histing if required reconnecting and re-fixing in position with replacement of nipple/union/socket check nut of capacity exc 500Ltrs n.exc 1000Ltrs incl cleaning & removing of all scab & dirt etc from tank & from mouths of circulating pipes etc complete all as directed
Cutting chase in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealing APP membrane etc and making good, cutting not exc 10cm girth complete all as specified and as directed.
M&L for brushing neat cement slurry with 3 Kg/Sqm of cement complete incl complete removal of existing roof treatment all as specified and directed.
M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.
M&L in repairs App based polymeric membrane minimum weight 3.5 Kg/Sqm and Minimum 3 mm thick reinforced with polyester non wove fabric (Wt. not less than 150 gms/Sqm land on primed surface by forced application completed all as specified and directed at site.
M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.
Supply only Integral WPC complete all as specified and directed. (Make:Pedilite/Roft/Fosroc/Bauchemic India/Cico)
S&F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylindrical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L Cement concrete ( 1:3:6) type C- 2, using (40mm graded stone aggregate) 75 mm thick as in sub base /plinth protection etc. Finishing cement concrete surface even and smooth without using extra cementcomplete all as specified and directed.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
Khodiyar Construction
ASHAPURA CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .