REPAIR/REPLACEMENT OF INTERNAL WIRING, FITTING AND FIXTURE, FLAME PROOF LED LIGHTS, WIRING FITTING AND FIXTURE, SWITCH SOCKET, CONNECTED EARTHING ITEMS, BURNT MCB, DBs, MCCBs AND CONNECTED ITEMS AT DOMESTIC AND TECH AREA AT AF STN NALIYA

Amount

Taking down copper/aluminum point wiring (light, fan, socket or power) complete and including fitting and fixture such as switches, socket ,ceiling rose ,pendent,regulators, light fittings, etc to be measured separetaly complete all as specified and directed. Note:- Job including for taking out old gutties,screw,nails,casing caping/conduit etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.

Material and labour for point wiring with 1.5 sq mm FRLSH single core PVC insulated unsheathed 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including PVC box ISI marked of suitable size for mounting the switches , socket outlets , fan regulators etc complete all as specified and directedfor following :-

One light/Fan point controlled by one switch.

One socket 3 pin outlet 5 amp on independent board.

One light point controlled by two 2-way switches.

One 3 pin socket outlet 5 amp on the same board with other switches.

One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size

All as per serial item number 2.00 here-in-before but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm 2.5 sq mm copper cable as earth continuity conductor.

Material and labour for point wiring for one light/Fan/socket 5Amps point on indep board controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable 1100 volts grade ISI marked drawn through and including heavy duty ERW conduit not less than 20 mm dia concealed type , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly complete all as specified and directed. Note : Point wiring will be done from Main DB. Length of point wiring may be beyond 5 mtrs and no extra amount for long point wiring will be considered.

Material and labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 1.5Sqmm, PVC insulated, unsheathed, FRLSH drawn through and including heavy duty ERW steel conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 1.5 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete including taking down old sub main wiring complete all as specified and directed. . Note:- 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment.

All as per serial item number 5.00 here-in-before but of copper conductor of size 6 Sqmm.

Supply and fix in replacement switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fix in replacement Flame proof switch socket & plug combined in LM6 cable termination box in LM6,16A, 250V, 2P+earth complete all as specified and directed.

Supply and fix in repair/replacement of flame proof, weather proof type, distribution board, Aluminum die cast alloy in LM6 material sheet metal enclosure including MCB 63 Amp SPN (incomer) and 07 Nos SP 6-32 Amps (out going), terminal, wiring and all fitting accessories etc complete all as specified and as directed.

Supply and fix in repair/replacement of LED flame proof well glass in die cast aluminum housing with heat resistant toughened glass, 70watt , IP65 protected and including all accessories, connecting up with flexible copper conductor 1.5 Sqmm 3core covered with flexible metal conduit of suitable size complete all as specified and directed.

Supply and fix flame proof, weather proof distribution board, Aluminum die cast alloy in LM6 material sheet metal enclosure including MCB 40 Amp, SPN (incomer) and 06 Nos SP 6-32 Amp (out going) terminal, wiring and all fitting accessories etc complete all as specified and directed.

Supply and fix flame proof weatherproof distribution board aluminum die cast alloy in LM6 material sheet metal enclosure incl MCB 63Amp TPN(Incomer) and 12 Nos SP 6-32 Amp(Outgoing) terminal, wiring and including all fitting accessories etc complete all as specified and as directed.

Supply and fix in repair/replacement of LED flame proof well glass in die cast aluminum housing with heat resistant toughened glass, 60watt , IP65 protected and including all accessories, connecting up with flexible copper conductor 1.5 Sqmm 3core covered with flexible metal conduit of suitable size complete all as specified and directed.

Supply and fix in replacement LED flood Light fitting 100 watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminum IP66 flood ligh with toughened glasst, suitable for highlighting architectural facade and general purpose lighting and connected items complete all as specified and directed.

Supply and fix in replacment of switch piano flush type single pole one way 5 amp complete all as specified and directed.

Supply and fix in replacment of switch piano flush type single pole two way 5 amp complete all as specified and directed.

Supply and fix in replacment of ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified and directed.

Supply and fix in replacment of switch socket combination 2 in 1, 3 pin 5/15 amp flush type complete all as specified and directed.

Supply and fix switch socket combination 2 in 1,5 amp flush type complete all as specified and directed.

Supply and fix in replacment of socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type complete all as specified and directed.

Supply and fix in replacment of MCB DB SPN 12 ways double door with 240 Volt, 200 amps rated bus bar with all accessories fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall complete all as specified and directed.

All as per serial item number 21.00 here-in-before but 8 way.

All as per serial item number 21.00 here-in-before but 4 way.

Supply and fix in replacment of sheet metal enclosure 4 ways double door triple pole and neutral with 415 Volt, 200 amps rated bus bar with all accessories fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall complete all as specified and directed.

Supply and fix in replacment of vertical type DB ,double door Suitable for isolated neutral bar 4 ways,IP 43 protection, Door earthing,mechenical impact strength IK 08 insulated busbar assembly ,fixed in the wall with suitable nut and bolt including 4 pole MCCB 125 Amp 16 KA fixed in DBs as incommer three phase supply fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall complete all as specified and directed.

Supply and fix in replacment of Isolater TPN 4 pole 100 amp complete all as specified and directed.

Supply and fix in replacment of Isolater TPN 4 pole 63 amp complete all as specified and directed.

Supply and fix in replacment of Isolater TPN 4 pole 40 amp complete all as specified and directed.

Supply and fix in replacement of MCB single pole and neutral 40-63 amps, 240 Volts complete all as specified and directed.

Supply and fix in replacement of MCB single pole and neutral 32 amps, 240 Volts complete all as specified and directed.

Supply and fix in replacement of MCB 6 to 32 amps single pole 240 Volts complete all as specified and directed.

Supply and fix in replacement of MCB 6 to 32 amps single pole 240 Volts complete all as specified and directed.

Supply and fix in replacement of MCCB enclosure suitable for 4 pole MCCB fixed in the wall with suitable size of nut bolt including taking down existing MCCB from the panel/old enclsure and refied the same in new enclosure and match the existing surface of wall with the existing surface etc complete all as specified and directed.

Supply and fix in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp including taking down old Unsv DBs any type by disconnecting of electrical connection etc complete all as specified and directed.

Supply and fix in replacement of switch bell push, flush type 5 Amp complete all as specified and directed.

Supply and fix in replacement of bell, AC, 230 Volts single pole complete all as specified and directed.

Supply and fix in replacement of lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified and directed.

Supply and fixing in replacement of LED Batten for LED tube light with 01 Nos of LED tube 20 Watt fixed on two Nos of Square Block with twin core copper flexible wire and incl taking down old type tube light fitting etc complete all as specified and directed.

All as per serial item number 38.00 here-in-before but of LED tube light 10 Wat complete all as specified and directed.

Supply and fix in replacement of LED flameproof type dome type LED light of capacity 60W,220-240V with lumens 100 per watt and surge protection 4KVA and LED driver of make phillips , optics beam angle 12 Deg C Die cast aluminium complete all as per CAT SSPL/WG/1231 including taking down old unserviceable street light fitting any type complete all as specified and directed.

Supply and fix in replacement of fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fix in replacement of LED Post top lantern of 40 watt, warm white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection, including provision of suitable size of GI pipe medium grade and suitable length as required on the site fifed on the existing pillers by welding of four Nos of leg and fixed by using fastner and nut and bolts and neccessary connection with twin core copper cable multistranded 1100 volt grade complete all as specified and directed.

Supply and fix in replacement of 36W LED recessed 2x2 luminaire 6500K fixed in the existing Ciling/roofs white powder coated CRCA housing with LED seanless front frame with flat white transmissionacrylic cover and necessary connection with twin core copper cable of suitable size complete all as specified and directed.

Supply and fix in repair of aesthetically designed LED security light luminiareis of 35 watts system wattage for energy saving having IP 66 degree of protection,with minimum system efficiency as>85%,made of pressure die casting aluminum housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management LED should have lens optics and vandal proof prismatic poly carbonate covers for ensuring efficient optics and uniform distribution of light Fitting should have operating voltage range of 120-270 VAC,THD<10%,P.F>.95 The fitting should have in built surge protector of 5 KV and CRI>70 with CCT 5700 K including 40mm dia GI pipe light grade of 1.5mtr length with necessary clamp & nut bolts complete all as specified and directed.

Supply and fix in replacement sub main wiring drawing through PVC casing caping of suitable size with all fittings two run of single core 6 sq mm FRLS single core PVC insulated unsheathed 1100 V grade with multistranded copper conductor and one run of 6 sq mm FRLS as earth wire of multistranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade including taking down old unserviceable sub main wire any size with casing caping/conduit and all accessories complete all as specified and directed.

Supply and fix in replacement sub main wiring drawing through PVC casing caping of suitable size with all fittings two run of single core 4 sq mm FRLS single core PVC insulated unsheathed 1100 V grade with multistranded copper conductor and one run of 4 sq mm FRLS as earth wire of multistranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade including taking down old unserviceable sub main wire any size with casing caping/conduit and all accessories complete all as specified and directed.

Supply and fix of 6 sq mm FRLSH as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade incl PVC casing caping 25mm width with necessary fittings (bend , Tee etc) complete all as specified and directed.

Material and labour for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board complete all as specified and directed. Note:- Maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs including necessary pit with cover, including testing on complition.

Supply only Switch socket combination 5/15 A 250V AC universal with box in polycarbonate complete all as specified and directed.

Supply only switch piano flush type 5 amps single pole one way complete all as specified and directed.

Supply only switch socket combination multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.

Supply only socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

Supply only ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.

Supply only electric bell Ding-Dong AC 230 Volt SP with brass screws and cup washers all as specified and directed.

Supply only replacement of capaciator 2.50 Mfd, 240 V complete all as specified and directed.

Supply only Hylem sheet 3 mm thick size 9'' x 11'' including cutting of switch,socket complete all as specified.

Supply only Hylem sheet 3 mm thick size 8'' x 5'' including cutting of switch,socket complete all as specified.

Supply only of Isolater TPN 4 pole 100 amp complete all as specified and directed.

Supply only Isolater TPN 4 pole 63 amp complete all as specified and directed.

Supply only MCB single pole and neutral 35-63 amps, 240 Volts complete all as specified and directed.

Supply only MCB 6 to 32 amps single pole 240 Volts complete all as specified and directed.

Supply only switch bell push, flush type 5 Amp complete all as specified and directed.

Supply only lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified and directed.

Supply only moduler switch 1 way 6A 1 module complete all as specified and directed.

Supply only moduler bell push 6 A, 1 module complete all as specified and directed.

Supply only moduler socket 6 A, 2/3 pin,2 module complete all as specified and directed.

Supply only moduler socket 6A/16A, 2/3 pin combined, 2 module complete all as specified and directed.

Supply only moduler fan regulator 120 W. 2 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 1 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 2 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 3 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 4 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 6 module complete all as specified and directed.

Supply only moduler white cover plate with frame. 8 module complete all as specified and directed.

Supply only PVC rectangular block for mounting switches, sockets,fan regulator,etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mmx50mm deep. Including taking down old unserviceable board any type and removing the all unsv swinches sockets etc all as directed. Note:- New switchs, sockets,switch sockets mounting on the new board will be mesasured seprately.

All as per item serial item number 76.00 here-in-before but of size 200mmx150mmx50mm deep.

All as per item serial item number 76.00 here-in-before but of size 350mmx300mmx50mm deep.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit with adequate quantity of charcoal and dust and common salt, not less than 2.25 mtr deep below ground level connected to & using galvanised iron strip 25×4mm as earthing lead drawn through GI protection pipe of size ordered specified for protection of earthing lead from earth electrode to test point/main DB from mechanical injury or tempering by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate No 5 of SSR Part - I and connected to earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting with earth point testing etc complete all as specified and directed. Note:- On testing after completion of earthing if desired earth resistance is not achieved, the earthing will be redone at no extra cost to obtain the desired earth values <5 ohms.

AARTI ENTERPRISES (BID ID -3420317)

Gayatri Construction Co (BID ID -3420350)

TAKHUBHA KANUBHA JADEJA (BID ID -3417500)

NEELKANTHA ASSOCIATE (BID ID -3420531)

M/s. AMIT ASSOCIATES (BID ID -3415790)

Krishna Engineering (BID ID -3420261)

Laxmi Enterprise (BID ID -3420271)