Loading
Loading…
Loading…
Tender Value
₹6.5 L
EMD Value
₹12,960
Closing Date
15 May 2026, 4:00 pmClosed
Executive Engineer PHE Division Kargil
Executive Engineer PHE Division Kargil
Construction of protection wall for service reservoir and laying and fitting of pipe line to new house holds including face lifting at water supply scheme Khandi (under JJM).
2026_PWD_18842_1
E-tender- 19 of PHE Division Kargil of 2026-27
Open Tender
Pipes and Pipe related activities
Item Rate
20 days
Khandi
Refer to NIT
3 documents required · 3 mandatory
₹65
Payable To Executive Engineer PHE Division Kargil
₹12,960
25 Apr 2026
25 Apr 2026
16 May 2026
25 Apr 2026
15 May 2026
25 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work in excavation by manual means in trenches for foundation ,drains, pipes ,cables etc.(Not exceeding 1.5mtr in width ) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan ,depth up to 1.5mtr including disposal of excavated earth up to 1mtr from cutting edge, disposed earth to be leveled and neatly dressed in: | |||||
| 1.01 | All kind of soil | 360 | Cum | - | - |
| 1.02 | Ordanary rock | 90 | Cum | - | - |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering lead up to 50mtr and left up to 1.5m. | 405 | Cum | - | - |
| 3Providing/ Laying and fitting of pipes complete including cost of pipes and required fittings as per the direciton of site Engineer incharge including all carriage complete. | |||||
| 3.01 | HDPE Pipe 25mm dia | 300 | RM | - | - |
| 3.02 | HDPE Pipe 20mm dia | 200 | RM | - | - |
| 4 | Random rubble masonry with hard stone from nallah in foundation and plinth including leveling up with cement concrete 1:6: 12 (1 cement 6 coarse sand : 12 graded stone aggregate 20mm nominal size upto plinth level . Cement mortar 1:6 (1 cement 6 coarse sand including all carriage complete. | 45.9 | Cum | 4 | ₹183.6 |
| 5 | Providing and fixing of sintex 500 litre capacity 3 layer at source including all necessory fitings complete. | 1 | No | - | - |
| 6 | Finishing with Epoxy Paints two or more coats at all locations prepared and applied as per manufacture specification including approprate priming coats preparation of surface etc complete on steel work/concrete work. | 259.15 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 20.46 MB
BOQ_44995.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .