Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹21.5 L+₹70,453.43 (3.39%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹21.7 L+₹89,677.23 (4.32%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹21.7 L+₹94,478.23 (4.55%)Rejected-Finance | L4 | Rejected-Finance BEING NOT LOWEST | |
| 5 | L5₹22.1 L+₹1.3 L (6.25%)Rejected-Finance GANDHI NAGARI AIRPORT ROAD BHUJ KUTCH PIN 370 001 GUJARAT | KACHCHH | GUJARAT | 370001 | L5 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹25.0 L
EMD Value
₹49,980
Closing Date
26 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPLACEMENT OF HARDSTANDING, SLAB,PCC ,LEVILLING, INCL CONNECTED ITEMS OF WORKS AT AF STN BHUJ
2022_MES_566201_1
8630/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹49,980
Yes
24 Jan 2023
30 Nov 2022
28 Dec 2022
30 Nov 2022
26 Dec 2022
14 Dec 2022
5 Dec 2022 - 9 Dec 2022
Amount
Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thick (below or above ground level ) complete all as specified and directed by Engineer-in-Charge.
Material & labour for providing cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) in foundation, filling sub basees and mass concrete complete all as specified and directed by Engineer-in-Charge.
Material & labour for 100mm thick cement concrete type B1, 1:2:4, using 20mm graded stone aggregate as in hard standing/ pavings in alternate bays including use of necessary formwork and finishing concrete topping even and fair without using extra cement and spike rolling to surface or making impressions of expanded metal , whilst the concrete is green complete all as specified and directed by Engineer-in-Charge.
Material & labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge.
Material & labour for 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm thick compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge.
Material & labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of grade 'B' complete all as specified and directed by Engineer-in-Charge.
Material & labour for forming contraction joints 30mm deep x 10mm wide, filled with sealing compound of grade 'B' complete all as specified and directed by Engineer-in-Charge.
Rough excavation in any type of soil n. exc 1.5 m deep and getting out complete all as specified and directed by Engineer-in-Charge.
Removing excavated materials (soil) exceeding 500km but not exceeding 1.5km and depositng where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engineer-in-Charge (Note:-Lead for earth 500 m)
Demolition of precast concrete block walling of any description built in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Material & labour for precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material & labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces is to be finished even and fair complete all as specified and as directed by Engineer-in-Charge.
Material & labour for providing cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in coping kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed by Engineer-in-Charge
Material & labour for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc complete all as specified and directed by Engineer-in-Charge.. (Reinforcement shall be measured and paid for separately).
Material & labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.
Material & labour for cutting grass manually and removing materials obtained from cutting/cleaning both sides of runway, PTT near DTGM board, Links, Cleaning of taxi track and other airfield area as per user requirement etc. complete all as specified and directed by Engineer-in-Charge. Note:- Contractor will arrange his own minimum 04 Nos. of labour form 09:00 AM to 05:00 PM (including lunch break of half an hour at mid day) every day and as well as reuquired. However department will have the right to stop the work at any time due to security point of view.
Material & labour for ploughing of soft ground arrester in the pattern prescribed by the Engineer in Charge using including deploying of tractor with jungle jim/plougher and a driver and cutting of grass around runway and taxi track all complete all as specified and as directed by Engineer-in-Charge. (Note :- Payment shall be made for each hour or part thereof of execution of work by the tractor on site. Necessary log book duly signed by the users, Engineer in charge and contractor shall be maintained and kept on records of the Engineer in charge and shall be produced when desired by the GE. Stationary for the same shall be supplied by the contractor)
Material & labour for grass cutting by mechanical bush cutter around airfield lights, sign boards along with drain as per reqiurement by users including deploying of labour complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair of illuminated both side LED Guidance Sign Board of sizes 1924 mm x 800 mm for runway code number 3 or 4 with an all-Aluminum weather-proof sturdy frame keeps the electronics protected from environmental hazards and mechanical enclosure will have designed such a way that it can be opened for maintenance from the front without any special tools. The top edge should have heavy-duty hinges that open the front door towards the top side and IP65 or above sealed to provide protection against dust and rain ingress and electrical connection of LED clusters should be designed in such a way that failure of a particular cluster or a group of clusters only marginally affects the illumination of the Signage. LEDs need to have more than 50,000 hours of operational life and do not heat up and electronics should be capable for operation from -20 °C to +55 °C and signboard shall be uniformly internally illuminated with required LEDs to achieve uniform illumination level and operated on AGL circuit without flickering including supporting frangible legs & frame incl secondary cable with connector and Isolation transformer 100 W from near tapping point and incl additional PCC plateform for sign board as directed by EIC etc. & sign shall comply as per ICAO Annex.14 Vol.I, ADM part 4 and ADM part 6 complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair of illuminated both side LED Guidance Sign Board of sizes 1912 mm x 800 mm for runway code number 3 or 4 with an all-Aluminum weather-proof sturdy frame keeps the electronics protected from environmental hazards and mechanical enclosure will have designed such a way that it can be opened for maintenance from the front without any special tools. The top edge should have heavy-duty hinges that open the front door towards the top side and IP65 or above sealed to provide protection against dust and rain ingress and electrical connection of LED clusters should be designed in such a way that failure of a particular cluster or a group of clusters only marginally affects the illumination of the Signage. LEDs need to have more than 50,000 hours of operational life and do not heat up and electronics should be capable for operation from -20 °C to +55 °C and signboard shall be uniformly internally illuminated with required LEDs to achieve uniform illumination level and operated on AGL circuit without flickering including supporting frangible legs & frame incl secondary cable with connector and Isolation transformer 100 W from near tapping point and incl additional PCC plateform for sign board as directed by EIC etc. & sign shall comply as per ICAO Annex.14 Vol.I, ADM part 4 and ADM part 6 complete all as specified and directed by Engineer-in-Charge.
M/s Pal Builders
BHAVANI PROVISION STORES
Bhavik Construction
OM SREE MAHADEV TRADERS
ASHAPURA CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .