Service Contract for Different sizes cable laying and associated jobs at various areas under EMOPH department, SgTPP.

Road boring for cable Laying

Supply and installation of Cable route ( marker(CONCRETE markers 2 feet Height, Width 1ft & 8 Inches Depth) )

LT Power Cable laying work(50 SQMM upto ( 185SQ MM) Laying in underground trench460 mmwx760mm average depth,with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed )

Supply & laying of 3 Inch GI Pipe ( (6Mtr/Pc) )

LT Power Cable laying work(10 SQMM upto ( 35SQ MM) Laying in underground trench460 mmwx760mm average depth,with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed )

Laying of 11 KV HT underground cable In ( a trench 460mm wide X 760mm depth with brick box protection on top & side, sand filling within bricks & earth back filling. )

HT CABLE staright through jointing ( Work of 11 KV 3CX,AL,XLPE,(95/ 185)sqmm cable with supply of suitable jointing Kit 3C AL, XLPE, (95/185sqmm)11KV grade,UN Earthed.Make-3M/RAYCHEM/Jointmask )

Supply& connection  Of 11KV ( (UNEARTHED)END jointing kit for End Termination of (95/185 sqmm) 11KV Cable.MAKE:3M/RAYCHEM/Jointmask )

Supply& Erection of incomer pannel ( fitted with One(01)no 400A MCCB Make- L & T / Schneider/ABB/SIEMENS These panel are to be outdoor type and to be fabricated out of 2 mm GI sheet steel ) with IP55 protection class construction with dimensions within (800mm*450mm*500mm-H*D*L& LEG 600mm with 5% tolerance.)and phosphate body with high corrosion resistant primer and finally with two coats of Light grey powder coating The Box shall have double door with self locking arrangement and a door handle conforming to general quality conditions.. The provision of Earthing is to be made up with G.I Flat of Size 25x4mm. Suitable cable glands of heavy duty, double compression type made up of Brass shall be provided at the bottom of the Box. One for incoming cable and one outgoing cable. )