Construction of Type-III Qtr. For additional block (OPDS and administrative wing of civil Hospital at Nadaun District Hamirpur H.P.

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre)to all height, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Boulder/stone filling hand packed under floors, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size. excluding the cost of centering and shuttering all work upto plinth level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size). including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand: six graded stone aggregate 20 mm (twenty millimetre nominal size) all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Back filling behind return wall,abutment wall,r/wall stone boulders of size range 5 cm to 20 cm (Five centimeter to twenty centimeter),in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm (Eighty millimeter) thick C.C. (Cement concrete) paver block of M-30 (Nominal mix M-thirty) grade with approved color design and pattern, complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : Three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimeter) nominal size) upto plinth level with :Cement mortar 1:6 (one cement : six coarse sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not less than @ 320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government..

Providing and laying in position reinforced cement concrete work M-20 (M-twenty ) design mix with minimum cement contents not less than @320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram Per Cubic metre) including curing complete excluding cost of centering , shuttering , finishing and reinforced for reinforced concrete work in walls (any thickness) including attached pilasters,,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete work M-20 (M-twenty ) design mix with minimum cement contents not less than @320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram Per Cubic metre) including curing complete excluding cost of centering , shuttering , finishing and reinforced for reinforced concrete work in beams , suspended floor , roofs having slop upto 15 (fifteen) degree landing , balconies , shelves , Chajjas , lintels , bands , plain window sills , stair cases and spiral stair cases above plinth level upto all floor level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Shelves (Cast in situ) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetre) wide . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for Stairs, (excluding landings) except spiral staircases . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500 (five hundered ) of Sail / TATA Tiscon/Shyam Steel/ Jindal panthar for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:4 (one cement : Four coarse sand) in superstructure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (Eighteen millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimeter) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Baroda Green marble complete at all levels. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (Eigteen millimeter) thick, 150 mm (one hundred fifty milliemter) wide pelmet of coir veneer board ISI (Indian Standard Institute) marked IS : 14842, (Indian Standard: Fourteen Thousand Eight hundred forty two) including top cover of 6 mm coir ve

neer board, nickle plated M.S. (mild steel) Pipe 20 mm (twenty millimeter) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimeter) M.S. (mild steel) Flat 10 cm (ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred into forty into forty millimeter) on both inner side of pelmet and rawl plugs 75 mm (seventy five millimeter) long etc. complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm (three hundred millimeter) complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 19 mm (Ninteen millimetre) thick commercial board water proof ISI Marked is No 1659 of (UNIPLY / GREEN Ply or its equivalent) shutters for cup boards i/c fixing with nical plated Piano hings with screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing M.S. (mild steel) (TATA/SAIL/Apollo/JSW Make ) grills of required pattern in frames of windows etcetera with M.S.(mild steel) flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to Stell windows by welding complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing 40x5 mm (forty into five millimeter) flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm (ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter)1:3:6 mix (one cement : three coarse sand :six graded stone aggregate 20mm (twenty millimeter) nominal size).complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X5 mm (forty into forty into five millimeter), aprooved make (TATA,SAIL or RASHTRIYA ISPAT) thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel but thinges 2.5 mm (two point five millimeter) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing MS (Mild Steel) channel aprooved make (TATA,SAIL or RASHTRIYA ISPAT) frame 125x50x4mm (one hundred twenty five into fifty into four millimeter) for end frame and 125x50x4mm (one hundred twenty five into fifty into four millimeter) with MS flat 125x4mm (one hundred twenty five into gour millimeter) in combination for centre frame complete as per Engineer in- charge complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 35mm (thirty five millimeter) thick ISI(Indian Standards Institute) marked factory made flush doors shutters conforming to IS : 2202 (Part I) (Indian standard two thousand two hundred two part one) non-decorative type, commercial board phenol bonded termite resitant and water proof core of block board construction with full frame of 1st class hard wood well matched commerical 3( Three) ply venrring with vertical grains or cross bands and face venrres on both face of shutter core of block board construction with frame of 1st class har wood and well matched commercial 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm (Thirty five millimeter) thick i.e. ISI(indian standard institute)marked stainless steel but hinges with necessary screws complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 35mm (thirty five millimeter) thick 2nd class Deodar wood panelle or panelled and glazed shutters for doors,windows and clerestory windows, including Panelling for panelled or panelled and glazed shutter all floor complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 35mm (thirty five millimeter) thick second class Deodar wood wire gauge shutters using galvanized M.S. (Mild Steel) wire gauge of average width of aperture 1.4 mm (one point four millimeter) in both directions with wire of dia 0.63 mm(zero point six three millimeter),for doors, windows and clerestory windows with hinges and necessary screws: complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 300x16mm (three hundred into sixteen millimeter) ISI (Indian Standard Institute) marked oxidised M.S. (Mild Steel) Sliding Door bolt black finish, (Barrel type) with necessary screws etc. complete :.complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 250x10mm (two hundred fifty into ten millimeter) ISI (Indian Standard Institute) marked oxidised M.S. (Mild Steel) tower bolt black finish, (Barrel type) with necessary screws etc. complete : complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-

in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) ISI (Indian Standard Institute) marked oxidised M.S. (Mild Steel) tower bolt black finish, (Barrel type) with necessary screws etc. complete : complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter) ISI (Indian Standard Institute) marked oxidised M.S. (Mild Steel) handles conforming to IS:4992 (Indian Standard: Forty Nine Hundred Ninty Two) with necessary screws etc. complete : complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) ISI (Indian Standard Institute) marked oxidised M.S. (Mild Steel) handles conforming to IS:4992 (Indian Standard: Forty Nine Hundred Ninty Two) with necessary screws etc. complete : complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Structural steel work of (TATA,SAIL or RASHTRIYA ISPAT) riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Steel work in built up tubular (TATA/SAIL/Apollo/JSW Make ) (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing MS railing for stair case having balluster of 19x19mm (Nineteen into Nineteen millimeter) square bar with aclear height of 85cm (eighty five centimeter) embedded in cement concrete steps and jointed with a electrical/gas welding at top along with MS (Mild Steel) flat of 40mmx6mm (forty into six millimeter) size complete with a applyiong priming coat of red lead paint as per drawing and specification and as per direction of Engineer-in-charge.complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Kota stone in single piece in tread of steps over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Marble stone flooring in single piece in riser of steps with 18 mm (Eighteen millimeter) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with :Jaisalmer yellow Marble complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Double charged vitrified floor tiles 600X600 mm (six hundred into Six hundred millimeter) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Double charged Vitrified tiles in sizes 600X600 mm (six hundred into Six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Full Body vetrified tiles (300x300mmx15mm) (three hundred into three hundred into fifteen millimeter) in grey/coloured or of approved Nitco /Kajaria / Simpolo /Johnson / Somany shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand)

laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Full Body vetrified tiles (300x300mmx15mm) (three hundred into three hundred into fifteen millimeter) in grey/coloured of required (Nitco /Kajaria / Simpolo /Johnson / Somany) shade in skirting risers of steps and dados on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

White glazed tiles (30 x 45 cm (thirty into forty five centimeter) (Nitco /Kajaria / Simpolo /Johnson / Somany) skirting rizers of steps and dado 12mm (twelve millimeter) thick cement mortar 1:3 (One cement : three sand) and jointed with cement slurry. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing Single socketed pipes 110mm (one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand : three hundred eighty two), leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 75mm (Seventy five millimetre) diameter of Supreme/ Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing Shoe 110mm (one hundred ten millimeter) on wall faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes i/c fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing Single Pushfit Coupler 110mm (one hundred ten millimeter) on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes i/c fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC Bend 110mm dia.(one hundred ten millimeter) on wall faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes i/c fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing unplasticised -PVC (Poly venyl Choloride) pipe clips of approved design to unplasticised PVC (Poly venyl Choloride) rain water pipes by means of 50x50x50 mm (fifty into fity into fifty millimeter) hard wood plugs, screwed with M.S. (mild steel) screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete.110 mm (one hundred ten millimeter) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 0.60 mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.60mm (zero point six zero millimeter) thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia (six millimeter diameter) & prepainted G.I.(galvanized Iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 15cm( fifteen centimeter ) wide 45cm ( forty five centimeter) overall semicircular plain G.I sheet gutter with iron brackets 40x3mm( forty into three millimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.63mm (Zero point six three millimetres) thick sheet as per the direction of Engineer in Charges including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel BP sheet 1.66mm (one point sixty six millimetre) to 2mm(two millimetre) thick in eaves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as

per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separtely including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing plain multipurpose cement board(Hight pressure steamcured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 3mm (Three millimeter) thick ACP Sheet approved (Aldecko) shade and Over GI frame work fixing with scews Complete with Engineer in-charge (frame work to be measured seprately). including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement into six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six Fine sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement into three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete at all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

White washing with lime to give an even shade :New work (three or more coats) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Distempering with 1st quality acrylic Washable distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seventy five litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing garsa (Kullu) stone slab 12.5mm (twelve point five millimeter) thick cladding on R.C.C. ( reinforcement cement concrete) surface side as on faces of arch masonry walls etc. on 12mm (twelve millimeter) thick cement plaster 1:3 ( one cement : three sand ) and jointed with cement slurry including scaffolding etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Construction coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm(fifteen into twenty two centimeter) in cement mortar 1:6(one :six) and inside plastering with cement mortar 1:3(one:three) including earth work and laying 10 cm (ten centimeter)cement concrete in 1:5:10 (one cement:five sand:ten aggregate)of 40 mm(forty millimeter) nominal size and 7.5 cm(seven point five centimeter) cement concrete 1:2:4 (one cement :two approved sand : four graded crushed stone aggregate of 20 mm(twenty millimeter) nominal size ) and finished with a floating coat of neat cement compl

ete as per standard design. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:a)Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: b)laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm (ten centimeter). c) third layer of 1.5 mm (one point five milimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm (one point two hunderd eighty nine kilogram per square meter) mixed with water proofing cement compound @ 0.670 kg/sqm (zero point six hundred seventy kilogram per square meter) and coarse sand @ 1.289 kg/sqm (one point two hunderd eighty nine kilogram per square meter). This will be allowed to air cure for 4 (four) hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm (thirty centimeter) on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Exhaust fan ISI marked including fixing with approved adhesive etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Excavation tranch of required width of pipes cables etc.Pipes, cables etc, not exceeding 80 mm(Eighty millimeter) dia. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal type water closet (European type of CERA, HINDWARE, PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE, PARRYWARE make) and C.P. flush bend with fittings and C.I. (cast iron) brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. (water closet)pan with ISI (Indian Standard Institue) marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing wash basin (CERA, Parryware, Hindware, Sanitaryware) with C.I. ((cast iron) brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 550X400 mm (five hundred fifty into four hundred fifty millimeter) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing Stainless Steel A ISI (18/8)(Indian standard institute) kitchen sink 510X1040 mm (five hundred ten into one thousand forty millimeter) bowl depth 178 mm (one hundred seventy eight millimeter) as per IS: 13983(Indian standard Thirteen thousand nine hundred eighty three) with C.I. brackets and stainless steel plug 40 mm (forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required : complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one point zero zeroo) metre long with S.S. triangular plate to Eureopean type W.C.(water closet) of quality and make ( Jaquare Opal series) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 32mm (forty millimeter)dia P.V.C. waste pipe for sink or wash basin (Finolex/ Relpipe (Reliance) / Vectus ) including P.V.C. waste fittings complete. Semi rigid pipe . complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.(chromium plated) brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST

or other taxes imposed by the Government

Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar / Hindon series of JAL / ESS including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm(one hundred fifty millimeter) diameter high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC(Polyvinyl chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC(Polyvinyl chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and Fixing 110mm(one hundred fifty millimeter) diameter PVC double equal branch ISI(indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and Fixing 75mm(seventy five millimeter) diameter PVC double equal branch ISI(indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) including fixing with aprooved adhesive etc complete complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) including fixing with aprooved adhesive etc complete complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC Floor trap of self cleansing design with screw

ed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :110 mm X 75 mm.(one hundred ten into seventy five millimeter) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 600x20mm (Six hundered into twenty millimetres) size CP Brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 1216 (16mm OD (sixteen millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 1620 (20 mm OD (twenty millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing 15 mm(fifteen millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20 mm(twenty millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Making connection of G.I(Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Fixing water meter and stop cock in G.I.(Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately). 200 mm (two hundred millimeter) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20mm (twenty five millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 25mm (twenty five millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 45cm ( fourty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government. Government.

Providing and fixing C. P. Brass overhead shower rose with 15 or 20 mm (fifteen or twenty millimetre) inlet 150mm (one hundred fifty five millimetre) with single flow and shower arm of Continental series of Jaquar / Hindon series of Jal / ESS including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. (cast iron) surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twent

y millimeter) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twenty millimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 15 mm(fifteen millimeter) diameter nominal bore G.I.(galvanised iron) Union in G.I. (galvanised iron)pipe including cutting and threading the pipe and making long screws etc. complete (New work) :complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20 mm(twenty millimeter) diameter nominal bore G.I.(galvanised iron) Union in G.I. (galvanised iron)pipe including cutting and threading the pipe and making long screws etc. complete (New work) :complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Finolex/Relpipe (Reliance)/Vectus), IS : 12701(indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib cock of approved quality (Jaquar / Hindon series of Jal / ESS (superior or heavy type) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing C.P. (Chromium plated) brass long body bib cock of approved quality conforming to IS (Indian Standard) standards and weighing not less than 690 gms (Six Hundred Ninty grams) .15 mm (Fifteen Millimeter) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.