Overhauling of Pumps of MV Vishva Vijetha on Turnkey Basis

Amount

INLET AND DISCHARGE PIPELINE CONNECTION TO REMOVE COMPLETE PUMP TAKEN OUT AND TRANSPORT TO WORKSHOP.PUMP TO DISMANTLE PARTS CLEAN INSPECT AND PUT UP FOR SURVEYOR.MOUTH RING AND WEAR RING CLEARANCES TO CHECK AND ADJUST BY MANUFACTURING AND FITTING NEW WEAR RING AFTER MACHINING MOUTH RINGS (VENDOR-SUPPLY). SHAFT TO BE INSPECTED AND TRUENESS TO BE CHECKED BUILT UP SHAFT BY METAL SPARAY IF REQUIRED.IMPELLER TO BE CHECKED AND BUILT UP BY SUITABLE MATERIAL (IF REQUIRED).PUMP CASING TO BE CHECKED AND BUILD UP AND MACHINE IF REQUIRED.OTHER PARTS LIKE BEARING MECHANICAL SEAL BUSHES SLEEVE WEAR RINGS TO BE ARRANGED BY VENDOR IF REQUIRED.AFTER SURVEY PUMP TO BE ASSEMBLED BACK IN GOOD ORDER AND TRANSPORTED BACK TO SHIP.PUMP FOUNDATION TO CHECK AND DRESSED IF REQUIRED. PUMP TO BE FITTED BACK ON FOUNDATION WITH NEW FOUNDATION BOLTS SS MATERIAL AND WASHER (VENDOR SUPPLY).PRESURE GAUGE CONNECTION CAPILLARY AND PRESSURE GAUGE TO RENEW(PRESSURE GAGUES VENDOR SCOPE). PUMPS SATISFACTORY TRIAL TO BE SHOWN TO CEO / SUPDT. ALL BOLTS , NUT GASKETS / JOINTING WASHERS AND WASTED NUT / BOLTS TO RENEW (VENDOR -SUPPLY). PLATFORM AND HAND RAIL AROUND PUMPS TO BE REMOVED FOR ACCESS AND FITTED BACK AFTER COMPLETION OF THE JOB. QUOTE FOR PUMP OVERHAULING TO BE INCLUSIVE OF ALL REPAIR TOOLS, CONSUMABLES, NEW JOINTS AND PACKINGS , MANPOWER , TRANSPORTATION ETC.TO REMOVE PLATFORMS HAND RAILING AROUND THE PUMPS FOR ACCESS TO REMOVAL FOR THE PUMPS. SCREW P/PS TO REMOVE FROM PLACE TRANSPORT TO W/SHOP DISMANTLE AND CLEAN. ALL PARTS TO CHECK CLEARENCES TO CHECK / ADJUST AND RENEW AS REQUIRED- BALL BEARINGS (VENDOR-SUPPLY) MECH SEALS (SHIP-SUPPLY). SAFETY/PRESSURE REGULATING VALVES TO O’HAUL AND ADJUST AS PER REQUIREMENT. PUMPS TO ASSEMBLE TRANSPORT BACK ON BOARD FIT BACK IN PLACE AND ALIGNMENT TO CHECK. ALL GASKETS/JOINTING WASHERS AND WASTED NUT/BOLTS TO RENEW (VENDOR-SUPPLY) PLATFORM AND HAND RAILING AROUND THE PUMPS TO BE REMOVED FOR ACCESS THE REMOVAL OF PUMPS & TO BE FITTED BACK AFTER COMPLETION OF THE JOB FOR . SATISFACTORY TRIALS TO BE SHOWN TO CEO/SUPDT. Complete SoW is to be carriedout as per Annexure-A to the satisfaction of HSL and Ship Staff.

ASSEMBLE ROTATING ASSEMBLY AND CARRY OUT BALANCING. ALL ASSOCIATED PRIMING UNIT TO BE OVERHAULED AND NECESSARY FLOAT & RUBBER RINGS TO BE RENEWED. DETAILS OF THE P/PS AS FOLLOWS:

BALLAST PUMPS. Maker :TAIKO KIKAI INDUSTRIES CO; LTD; MODEL: EMDE-400MC CAPACITY:-1500M3/Hx25m MOTOR: 185 KWX 1190 RPM 440 V 60 Hz 3 PH.

MAIN S.W PUMPS. Maker ;TAIKO KIKAI INDUSTRIES CO; LTD; MODEL: EMC-250MCT: VERTICAL CENTRIFUGAL PUMP :CAPACITY:-300M3/Hx25m MOTOR: 30 KWX 1775 RPM 440 V 60 Hz 3 PH

FIRE & GS PUMP (1); FIRE & BILGE PUMP (1).CENTRIFUGAL PUMP; TAIKO KIKAI INDUSTRIES CO; LTD; CAPACITY:- 120/250 M3/HX 85/30M MOTOR: 90KWX1785 RPM; 440V; 60 Hz; 3 PH

EMERGENCY FIRE PUMP TAIKO KIKAI INDUSTRIES CO; LTD; MODEL: MMCN-125MB

MAIN ENGINE L.O.PUMP NO 1 & 2: TO BE OVERHAULED.

CENTRIFUGAL PUMP: CAPACITY:- (260 M3/HX45 M)72M3/H X 80 MTR; MOTOR: 90KWX1785; 440V 60 HX; 3PH

BILGE TRANSFER PUMP: Maker : SHIN-SHIN MACHINERY:TAIKO KIKAI INDUSTRIES CO; LTD; MODEL: HPK-20A : PISTON PUMP; CAPACITY:-20 M3/H; MOTOR: 7.5 KWX 1800 RPM

SLUDGE PUMP. Maker: TAIKO KIKAI INDUSTRIES CO; LTD; MODEL: HNP-401 System Particulars : SCREW PUMP; CAPACITY:- 10M3/HX1200RPM; 3.7 KW;440V; 60Hz; 3 PH

HFO TRANSFER PUMP. MODEL-MSH-20A; 20 M3/H; 25M ; 11KW; 1800RPM; 440V; 60Hz

TECH WATER HYDROPHOBE P/P/ DAILY F.W PUMP; MODEL TMVE-32MT;2.2 KW; 3.5M3/ HR; 440V; 60Hz; 3 PH

BOILER FEED PUMP: MODEL MB 32X04S 3.6M3/HR HEAD 110M SHIN SHIN

F.W.G. EJECTOR PUMP . MAKE:ALFA LAVAL MODEL: 100NTSm; CAP: 71.5 m3/hr; HEAD: 48m; OUTPUT:11KW; 3600 rpm.

M/E JACKET W. PUMP: Maker : TAIKO KIKAI INDUSTRIES CO; LTD; MODEL:EMC-125MCT System Particulars : VERTICAL CENTRIFUGAL PUMP; CAPACITY:-100M3/Hx30m MOTOR:150 KWX 18005 RPM 440 V 60 Hz 3 PH

LT COOLING F.W. PUMP: 535 M3/HR,1800 RPMX02 NOS,TAIKO KIKAI INDUSTRIES CO.LTD.,EMD-300MCT

FIRE PUMP TO PRESENTED & SHOWN TO SURVEYOR(CSM SURVEY)

SRI SAI KRISHNA WORKS

Sri Balaji Marine and Civil Engg Works

SHRI GURUDATTA ENGINEERING WORKS

avisan engineering enterprises

Asha Engineering Works

SRI SRINIVASA ENGINEERING WORKS