GENERAL-Non Plan works 2025-26-SR and Maintenance work to PWD Roads Sub division Chittur

Work Name:GENERAL-Non Plan works 2025-26-SR and Maintenance work to PWD Roads Sub division Chittur-General Civil Work

摥戠⁹桴⁥慭畮慦瑣牵牥 眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠〮┸愠摮਍挠湯潦浲湩⁧潴䤠㩓㔱㈶ⰲ漠⁦灡牰癯摥戠慲摮☠洠湡晵捡畴敲Ⱳ椠污潣潬牵⁳湡൤ 桳摡ⱥ氠楡⁤湯㈠‰浭琠楨正挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮›‴潣牡敳猠湡⥤†潪湩楴杮਍眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠⸳″杫猯浱椠据畬楤杮朠潲瑵湩⁧桴⁥樠楯瑮⁳楷桴眠楨整਍挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮⁳瑥⹣吠敨琠汩獥洠獵⁴敢挠瑵眠瑩⁨桴⁥敺潲挠楨灰湩൧ 楤浡湯⁤畣瑴牥漠汮⁹‮䰠祡湩⁧景琠汩獥眠汩敢搠湯⁥楷桴琠敨渠瑯档琠潲敷ⱬ瀠楬牥ബ 敷杤ⱥ挠楬獰漠⁦敲畱物摥琠楨正敮獳‬敬敶楬杮猠獹整湡⁤畲扢牥洠污敬⁴潦⁲汰捡湩൧ 桴⁥楴敬⁳敧瑮祬愠摮攠獡汩⹹䐊畯汢⁥档牡敧瘠瑩楲楦摥琠汩⁥潰楬桳摥映湩獩⁨景猠穩൥匊穩⁥景吠汩⁥㘠〰砠ㄠ〲‰浭ǹ㄀⸱㜳㩁牐癯摩湩⁧湡⁤楦楸杮ㄠ瑳焠慵楬祴挠牥浡捩朠慬敺⁤汦潯⁲楴敬⁳潣普牯業杮琠卉㨠ㄠ㘵㈲⠠桴捩湫獥⁳潴戠⁥灳捥晩敩⁤祢琠敨洠湡晵捡畴敲⁲ 景愠灰潲敶⁤慭敫椠污潣潬牵ⱳ猠慨敤⁳硥散瑰戠牵畧摮ⱹ戠瑯汴⁥牧敥Ɱ戠慬正漠⁦湡⁹楳敺愠⁳灡牰癯摥戠⁹湅楧敮牥椭⵮桃牡敧椠歳物楴杮‬楲敳獲漠⁦瑳灥⁳湡⁤慤潤⁳癯牥ㄠ′浭琠楨正戠摥漠⁦散敭瑮䴠牯慴⁲㨱″ㄨ挠浥湥㩴㌠挠慯獲⁥慳摮 湡⁤潪湩楴杮眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠㌠㌮杫瀠牥猠浱椠据畬楤杮瀠楯瑮湩⁧湩眠楨整挠浥湥⁴業數⁤楷桴瀠杩敭瑮漠⁦慭捴楨杮猠慨敤挠浯汰瑥⹥Ć㔀⸰⸶⸱㨴潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳䘨捡潴祲洠摡⥥漠⁦楳敺㌠砰〲㉸挰牯渠慥敲瑳愠慶汩扡敬猠穩⁥潣普物業杮琠卉㈠㠱‵慰瑲䤠漠⁦㤱㤷映牯映畯摮瑡潩湡⁤汰湩桴眠瑩⁨桴捩湫獥⁳〲浣愠摮愠潢敶椠㩮䌠⁍㨱‶ ‱散敭瑮㨠㘠挠慯獲⁥慳摮⤠攠捴挠浯汰瑥⍥
〵㈮㈮⸵㨱楆汬湩⁧楷桴挠湯牴捡潴❲⁳睯慥瑲⁨ 硥汣摵湩⁧潲正 湩琠敲据敨ⱳ瀠楬瑮ⱨ猠摩獥漠⁦潦湵慤楴湯⁳瑥⹣椠慬敹獲渠瑯攠捸敥楤杮㈠‰浣椠敤瑰ⱨ挠湯潳楬慤楴杮攠捡⁨敤潰楳整⁤慬敹⁲祢爠浡業杮愠摮眠瑡牥湩Ⱨ

lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-chargeû
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)ã10.29.2:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sidesy9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbowno”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend™50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia TeeÖ50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2metre‡18.54.4:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gmseachÃ18.58.2.1:Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating18.8.2:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipesâ17.32.2:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm
4.17:Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.