Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 CrAccepted-AOC | ₹12.0 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹13.0 CrRejected-Finance | ₹13.0 Cr | L2 | Rejected-Finance other than L1 |
| 3 | L3₹13.8 CrRejected-Finance | ₹13.8 Cr | L3 | Rejected-Finance other than L1 |
| 4 | L4₹14.1 CrRejected-Finance | ₹14.1 Cr | L4 | Rejected-Finance other than L1 |
| 5 | Rejected-Technical | - | - | Rejected-Technical MOU with green building consultant and IP not submitted |
Tender Value
₹12.3 Cr
EMD Value
₹9.4 L
Closing Date
3 Jun 2024, 6:00 pmClosed
CWE AF TRIVANDRUM
CWE AF TRIVANDRUM HQ SAC IAF COMPLEX AKKULAM THURUVIKKAL POST TRIVANDRUM 11
Provn of OTM Accn for LLTR at 401 AF STN Suryalanka
2024_MES_651179_1
CWE(AF)/TVM/82489E8 OTM Accn for LLTR suryalanka
Open Tender
Construction Works
548 days
Suryalanka
Class S category a(i)
8 documents required · 8 mandatory
₹3,000
AGE I AF Suryalanka
₹9.4 L
Yes
15 Jul 2024
26 Apr 2024
5 Jun 2024
26 Apr 2024
3 Jun 2024
27 May 2024
26 Apr 2024 - 10 May 2024
Amount
Sch 'A' Part- I - BUILDING/STRUCTURES (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)
Design and construction of RCC M-30 framed Structure (G+1) OTM Accn with permanent Specifications in RCC M-30 with brick masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Design and construction of RCC M-30 framed Structure Single Storey Storage Accn with permanent Specifications in RCC M-30 with brick masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Design and construction of RCC M-30 framed Structure Single Storey Garage for " A, B & C" vehicle with permanent Specifications in RCC M-30 with brick masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Blank
Design and construction of RCC Ramp for designed load 40-50 Ton Capacity with permanent Specifications in RCC M-30 with brick masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Design and construction of RCC M-30 Single Storey Sub station building with permanent specifications in RCC M-30 with brick masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
GENERAL SUMMARY (Note : Schedule 'A' Part II to IX are prepriced by MES under Ser No. 2 to 8.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)
Total of Schedule ‘A’ Part II “SITE CLEARANCE ”
Total of Schedule ‘A’ Part III “ INTERNAL ELECTRIFICATION”
Total of Schedule ‘A’ Part IV “ROAD/PATH/CULVERT”
Total of Schedule ‘A’ Part V “ AREA DRAINAGE”
Total of Schedule ‘A’ Part VI “ SEWAGE DISPOSAL”
Total of Schedule ‘A’ Part VII “INTERNAL WATER SUPPLY”
Total of Schedule ‘A’ Part VIII “ AIR CONDITIONING"
Total of Schedule ‘A’ Part IX “LIGHTENING PROTECTION”
Total of Schedule ‘A’ Part X “EXTERNAL WATER SUPPLY”
Total of Schedule ‘A’ Part XI “EXTERNAL ELECTRIC SUPPLY”
Sch 'A' Part- XII - Misc Items (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)
M&L for DWCPE pipe 150mm nominal dia of class SN8 complete laid in trenches including tested complete all as specified in IS 16098:2013 complete all as specified and directed.
S&F Voltage stabilizer copper wound 4.0 kVA Capacity for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and as directed.
S&F Voltage stabilizer copper wound 5.0 kVA Capacity for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and as directed.
Supply and fix Voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA complete all as specified and as directed.
M&L for Earthing complete with GI Earth Plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with GI earth lead GI earth strip of size 32x6 mm by means of nuts/bolts/ check nuts/ wahers , GI pipe light grade of 40 mm bore as protection pipe, GI Strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia light grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed.
M&L for Maintenance Free chemical earthing pit Pipe-In-Pipe Technology, using M.S Pipes of Outer Dia is 76 mm with a wall thickness of 1.6 mm, Inner Dia is 42 mm with a wall thickness of 2.6 mm, Over all Length not less than 3000 mm, External Corrosion Protection, Galvanisation (80-100 microns), Internal Corrosion Protection, A ground breaking corrosion resistant Crystalline Conductive Compound filled and compacted in the cavity within the pipes to enhance the electrodes performance, ELECTRODITE Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity : < 5 ohmmetre, (In ideal moist conditions),> 5 ohm-metre (Dry Conditions), High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant, contact between the electrode surface & soil of not less than 50 kg. Conforms to IS : 3043 - 1987 i.e., Code Of Practice For Earthing along with Poly Plastic Earthpit Chamber Cover Heavy Duty (5 ton Capacity ) testing, complete all as specifeid and as directed. Note: If Earth Pit value is more than 1 ohm with in 01 year, contractor is liable to bring the value down under his own arrangements.
M&L for earth plate marking made up of angle iron 25x25x3 of length not less than 1.0 mtr, (0.5 mtr above GL) fixed with MS plate of 2 mm thick, 250 x 100 mm by welding, with two coats of red oxide paint with one coat of anti corrisive paint of specifed colour and writen "Maint Free Chem EP, ER Value :____" and fixed complete all as specified and as directed.
Masonry valve chamber 1500 x 1500 x 750 including excavation and earth work in any type of soil and 100 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type C1 coping 50 x50x6 mm angle iron 6 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome prim
Supply, installation, testing and commissioning of 11KV, 3 phase 20 KA/3 sec, 50 Hz, totally gas insulated outdoor Compact Ring Unit with both side (Type:+C+) consisting of Safety mechanism is numerical relay with motorized tripping system (rating as per transformer rating), complete not less than 2.0 mm robotically welded stainless steel tank of IP 67/more class of protection, with 350 MVA rupturing capacity with panel front terminated type, HT busing shall be onsite replaceable, with and including right angle boots, PCC foundation, excavation and earth work, etc and connecting kit to extend from eixiting panel complete all as specified and as directed. Note : This unit is extension to the existing ABB Unit of as per compatible with existing model on ground
Supply, installation, testing and commissioning of 11KV, 3 phase 20 KA/3 sec, 50 Hz, totally gas insulated outdoor Compact Ring Unit with right side extensible (Type:CC+) consisting of 1 nos manual operated fixed type (non drawout type) 630 A load break switches and Safety mechanism is numerical relay with motorized tripping system (rating as per transformer rating), complete not less than 2.0 mm robotically welded stainless steel tank of IP 67/more class of protection, with 350 MVA rupturing capacity with panel front terminated type, HT busing shall be onsite replaceable, with and including right angle boots, PCC foundation, excavation and earth work, etc complete all as specified and as directed.
M & L for masonry platform for transformer, of size 1.5m x 1.5m x 1.5m height above ground level and 0.60 m below ground level PCC Blocks in cm 1:6 including excavation and earth work in any type of soil foundation in PCC 1:2:4 type B1 with 20mm graded aggregate 10cm thick at top of the platform over 75mm thick PCC(1:4:8) sub base over approved earth filling and, plastering 20mm thick in cm 1:4 on PCC Blocks walls and applying three coats of white wash etc complete all as specified and as directed.
Supply, install, testing and commissioning of Sound Proof DG set 50 KVA, 3 phase 4 wire, 415 volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design thereby facilitating /easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board (CPCB-II) latest norms/regulation with fuel tank, battery and standard accessories and PCC foundation for (acoustic enclosure also 45 CM above ground level) as recommended by manufacturer, vibration pad, sand cushioning around PCC foundation of height not less than 45cm from GL, tools and spares, as provided by manufacturer all as specified and as directed with the following specifications:-
(A) ENGINE :- Water cooled diesel engine of suitable capacity to match the 50 KVA alternator under NTP conditions with provision of 10% over load for 1 hour in every 12 hours running confirming to BS-5514 / ISO 3046 Standards. Make: Greaves or as per Appendix B The engine shall consist of following :- (i) Fly wheel (ii) Radiator, Air-to-Air After cooler, pusher fan & fan drive arrangement (iii) Dry type Air cleaner with restriction indicator (iv) Fuel injection system of make Bosch (v) Radiator fan (blower type) with guard (vi) Precision governor (mechanical type) Class A1 (vii) Gear Driven Water Pump (viii) Fuel Filter (ix) Spin-on Lubricating oil filters (x) 12 V DC electrical starting system consisting of starter motor, charging alternator. (xi) Exhaust silencer heavy duty residential type (xii) First Fill of Lubricating oil (API CF4 grade, Make Greaves Maxtherm Lube or its equivalent stranded) (xiii) Sensors for Oil pressure, Coolant Temperature & level. (xiv) Exhaust piping as per manufacturer design
(C) BRUSHLESS ALTERNATOR:- (i) Alternator coupled to engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation. Self Excited, self regulated Brush less Single bearing alternator shall be confirming to BS- 5000 or relevant of IS-4722 Make: Crompton/ Stamford (ii) Type: self excited self regulated with automatic voltage regulator (iii) Rating: 50 KVA at 0.8 PF lagging (iv) Speed- 1500 RPM (v) System -415 V +/- 2.5% AC 3 phase 4 wire 50 Hz. (vi) Connection - 4 wire star connected (vii) Enclosure -Screen projected drip proof (viii) Ventilation - self ventilated (ix) Insulation: class H , IP-23 (D) Sub base Fuel tank 14 SWG MS sheet and capacity to hold diesel sufficient for running 08 hours at full load including (i) Level indicator on fuel tank. (ii) Drain plug (iii) Piping for fuel tank as per manufecturer design (iv) Fuel strainer. (vi) Battery : 01 Nos 12 V not less than 88 AH with mounting frame.
(E) AMF PANEL OUTDOOR TYPE: The AMF Panel Outdoor type suitable for 50 KVA DG Set factory made out of CRCA Steel 3 mm thick Sheet floor mounted type and front operated type, totally enclosed dust, damp and vermin proof, all doors and joints will be suitable gasketed to form dust and vermin proof. The panel would be powder coated minium thickness of 50 microns, stove enameled paint finished after elaborate pretreatment to form a long lasting characteristic. The control panel will be complete in all respect with fuses, wiring and labels etc, the following will be incorporated in the AMF Panel :- (a) HRC Fuse with fuse base,Din type 35A-06 No (b) Current transfrmer,CL-1,5 VA,200 /5A-04 No. (c) Four pole Contactor, 240 V AC, 2 NO +2 NC, of Suitable Current, AC3-02 Nos for (DG Set & Commercial). (d) Indicating Lights R ,Y,LED type, 240V AC -04 No. (e) Indicating Lights B,LED type, 240V AC -02 No. (f) Illu Push Button with elements, LED type -NO/NC-01 No. (g) Mushroom head push button,Press to lock,Turn to release-01 No. (h) KW/PF/KWH meter 96 x 96 sqmm ,3 Phase Digital type 415 V AC-01 No. (j) DC Ammeter 96 x 96 Sqmm,Digital type 0-20 A -01 No. (k) 12 V, 10 A DC Automatic Battery Charger with inbuilt trickle / boost facality-01 No
(l) 4 Point Alarm Annuciator with inbuilt Hooter,Test,Accept & Reset Push button. (m) Solid state single element earth fault relay with 2 c/o contact, CTR-250/5A ,Aux supply 230V AC - 1 No. (n) AMF Controller,12 V DC - 01 No. (o) Aux relay,Coil voltage,24V DC,4C/O,14 PIN-24V DC-06 Nos (p) Thermal O/L Relay,with inbuilt SPP Feature.
Supply and fixing LED street light fitting with and including individual high power 48 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast alu with secondary optics, suitable for outdoor use IP 66, connected with connecting cable complete all as specified and as directed
S&F street light brackets made of 25 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. flat iron clamps, 2 Nos, M.S nut & bolt with cup washers, painting to MS material with anti corrisive paint complete all as specified and as directed.
S&F loop in-out junction box with non metalic FRP junction box suitable of size 350mm x 250mm with connector 4 way and including one MCB 6 A, 230V alongwith 2 Nos 'C' Clamps and back clamp made up of 20x3 flat iron and fixing on pole with necessary nuts bolts, washers, 2 Nos cable glands of size not exc 4 core 25 sqmm, Cable lugs as required complete all as specified and as directed.
Supply and fix PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 3 core 1.5 sqmm 1100 Volt, conforming to IS 694, multistranded with Rigid Heavy duty PVC Conduit of 20 mm dia with bends from Junction box to connector of Street light fitting complete all as specified and as directed. Make Polycab/ Finolex/ Havells/ Gloster/ Nicco
Supply and fix LED Flood light 70 W, IP 65, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light, suitable for highlighting architectural facade and general purpose lighting complete all as specified and as directed. (08 Nos on RCC Ramp 04 on each side)
Supply, installation, commissioning and testing of LT Feeder Pillar Box Indoor, double door type made out of CRCA Sheet of 2.0 mm thick with powder coated painting frame made out of angle iron 45 x 45 x 6 mm and four numbers of 600 Amps aluminum bus bar strips / bars duly insulated on insulators / suitable size Bakelite sheet, free space between MCCB / busbar and other connection items should be provided, the space between ground to panel should not be less than 45 cm, LT panel depth should not be less than 45 cm and should be provided with necessary locking arrangement, danger notice sticker, cable glands, internal wiring with FRLS copper wires, PCC foundation for erection of LT panel not less than 0.2 Mtr above ground level and comprising and including the following:
(i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 400 Amps, 415 volts, 50 Hz, rupturing capacity 36 KA with adjustable thermal and adjustable magnetic setting - 01 No. (ii) LED Multifucntional Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (iii) LED indicating lamps with colour Red, Yellow, Blue (03 Lights) - 01 Set (B) Main Outgoing (i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 200 Amps, 415 volts, 50 Hz, rupturing capacity 36 KA with adjustable thermal and adjustable magnetic setting - 02 No. (Radar Load, Spare) (ii) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 125 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and adjustable magnetic setting - 01 No. (APFC Panel) (iii) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 63 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic setting - 03 No. (Bldg, DG AMF, Spare) (iv) MCB FP 6-32 Amps, 10 kA, C Curve - 04 Nos (Radar Section at Ramp, Substation Bldg, Spare-2) (v) MCB DP 6-32 Amps, 10 kA, C Curve - 09 Nos (Type A, Type B, Type C (04Nos) Garrages, Storage Accn and Spare-2)
Supply, installation, commissioning and testing of LT Feeder Pillar Box outdoor, double door type made out of CRCA Sheet of 3.15 mm thick with powder coated painting frame made out of angle iron 45 x 45 x 6 mm and four numbers of 120 Amps aluminum bus bar strips / bars duly insulated on insulators / suitable size Bakelite sheet, free space between MCCB / busbar and other connection items should be provided, the space between ground to panel should not be less than 45 cm, LT panel depth should not be less than 45 cm and should be provided with necessary locking arrangement, danger notice sticker, cable glands, internal wiring with FRLS copper wires, PCC foundation for erection of LT panel not less than 0.2 Mtr above ground level and comprising and including the following:
(A) Main Incoming (i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 63 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic setting - 01 No. (ii) Onload Change over 4 pole, 63 Amps, - 01 No. (iii) LED Multifucntional Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (iv) LED indicating lamps with colour Red, Yellow, Blue, Mains On, Standby On (05 Lights) - 01 Set (B) Main Outgoing (i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 63 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic setting - 02 No. (LLTR Bldg, Spare) (ii) MCB FP 6-32 Amps, 10 kA, C Curve - 03 Nos (For Street Lights, Ramp lights and Spare) (iii) Analog programmable timer switch 24 hours with necessary contactors 3 phase for operation of street light timer (SST - 15 min) with battery backup - 01 No.
S&F All-in-One solar street light with inbuilt SCC, Stand alone street light with Solar PV module High efficiency Mono crystalline, with lithium ferro phosphate battery with in built BM’s technology MPPT charge controller with 5 Mtr heavy duty GI tube pole of dia not less than 80 mm with end cap, Low battery indication on light, excavation, removing, PCC in foundation as recommended by OEM and coping, complete all as specified and as directed.
Supply, install, commissioning and testing of three phase four wire ,indoor type oil cooled Ultra Isolation Transformer of capacity 100 KVA , 50 Hz microprocessor based technology , naturally oil cooled, copper wound & designed for following specifications: (i) Ratio 1:1, (ii) Regulation Better than 3.5%, (iii) Efficiency 98 %, (iv) Power Factor 0.8 Lead to .8 Lag, (v) Di-Electric strength 3kv for 60 Sec, (vi) Insulation Resistance Better than 500 Mega Ohms, (vii) Coupling Capacitance 0.01pF for 100 dB, (viii) Leakage Current < 20 Micro Amps, (ix) Common Mode Attenuation 100 db./ 120 db., (x) Operating temperature 0˚ C - 40˚ C Ambient Protections circuit includes Electronic over voltage trip, Electronic under voltage trip, Overload and short circuit protection. Single phasing prevention & cut off Phase reversal protection & cut off Metering LCD type Input voltage P-N Output voltage p-p Load current in all phase’s frequency complete all as specified and as directed by Engineer in charge.
Supply and fix Off LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps
Supply, installation, commissioning and testing of LT Panel (for Radar eqpt) outdoor, double door type made out of CRCA Sheet of 3.15 mm thick with powder coated painting frame made out of angle iron 45 x 45 x 6 mm and four numbers of 300 Amps aluminum bus bar strips / bars duly insulated on insulators / suitable size Bakelite sheet, free space between MCCB / busbar and other connection items should be provided, the space between ground to panel should not be less than 45 cm, LT panel depth should not be less than 45 cm and should be provided with necessary locking arrangement, danger notice sticker, cable glands, internal wiring with FRLS copper wires and comprising and including the following:
(A) Main Incoming (i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 200 Amps, 415 volts, 50 Hz, rupturing capacity 36 KA with adjustable thermal and adjustable magnetic setting - 01 No. (ii) LED Multifucntional Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs (iii) LED indicating lamps with colour Red, Yellow, Blue, (03 Lights) - 01 Set (B) Main Outgoing (i) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 100 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic setting - 02 No. (Radar, Spare) (ii) MCCB conforming to IS:13947 (Part-II), IEC-947, 4 pole, 63 Amps, 415 volts, 50 Hz, rupturing capacity 25 KA with adjustable thermal and fixed magnetic setting - 01 No. (Operations) (iii) MCB FP 32 Amps, 10 kA, C Curve - 01 Nos (For Communication)
M&L for Earthing complete with earth galvanized steel plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with galvanized earth lead GI wire 4 mm dia by means of bolts, check nut and washers of GI or steel, GI pipe light grade of 15 mm bore as protection pipe, GI wire of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia light grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed.
S&F Heavy duty LED batten lights fitting 1x40W, 4 Feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
S&F of street light brackets made of 25 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to wall with suitable size of M.S. flat iron clamps, M.S nut & bolt with cup washers, painting to MS material with anti corrisive paint complete all as specified and as directed.
Supply and install testing hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 2 TR 5 star inverter complete all as specified and directed.
SVS PROJECTS
CH.VEERARAGHAVULU CONSTRUCTION PVT LTD
K KUMAR RAJA PROJECTS P LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid