Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.5 L
EMD Value
₹4,916
Closing Date
17 Dec 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR
RNB ELECTRIC DIVISION KASHMIR ENGINEERING COMPLEX
Construction of sub center at Theeru Ganderbal B.W.O Electric Work
2025_PWDJK_297436_1
NIT No.213/2025-26 Dt/05/12/2025
Open Tender
Electrical Works
Percentage
10 days
Theeru Ganderbal
Please refer Tender documents.
4 documents required · 4 mandatory
₹200
EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR
₹4,916
5 Dec 2025
5 Dec 2025
18 Dec 2025
5 Dec 2025
17 Dec 2025
5 Dec 2025
Wiring for light point / exhaust fan point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable in surface/recessed Conduits.The job including cost of Circuit Wire (6/8 points per circuit) in 2.5 sq.mm (with 1x2.5 sq.mm) for earth Multi strand Copper wire from Switch board to D.B complete (Havells/Polycab/Anchor/ eq. Make to be approved by EIC),with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front,Modular blanking plate where required & suitable GI box etc ISO/IEC Certified Havells/ Legrand/Panasonic/ Anchor Rooma Plus/Schneider/ eq. Make & shall be approved before execution of work.
Wiring for Ceiling fan point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable in surface/recessed Conduits(Havells/Polycab/ Anchor / eq. Make to be approved by EIC) with 01 No. of 6 Amp Modular Switch,Two Module Stepped Type Electronic Fan Regulator, Modular Plate,Cover in front and suitable GI box etc ISO/IEC Certified Havells/ Legrand/Panasonic/Anchor Rooma Plus/Schneider/ eq. Make & shall be approved before execution of work.
Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor / eq. Make to be approved by EIC) including cost of Conduits with other accessories like bends,etc complete to be laid in wall and finishing the surface to its original shape by cement mortar plastering, with 01 No. of 16Amp,Modular switch, Modular 01 No. of 3-PIN 16Amp Socket, Modular plate, cover in front,Modular blanking plate where required and suitable GI box etc ISO/IEC Certified Havells/Legrand/ Panasonic/Anchor Rooma Plus/Schneider/ eq. Make & shall be approved before execution of work.
Wiring for 6Amp Plug (Computer) with (P+N+E) 3 x 2.5 sq.mm FRLS PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab /Anchor / eq. Make to be approved by EIC),including cost of Conduits other accessories like bends etc complete to be laid in wall and finishing the surface to its original shape by cement mortar plastering,with 02 No. of 6 Amp Modular Switch, 02 No.of Modular 6 Amp.of 5-PIN Socket,Modular Plate,Cover, Modular blanking plate where required and suitable GI box etc ISO/IEC Certified Havells/Legrand/ Panasonic/Anchor Rooma Plus/Schneider/eq. Make & shall be approved before execution of work.
Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Havells/Polycab/Anchor / eq. Make to be approved by EIC) including cost of Conduits with other accessories like bends etc complete to be laid in wall/ceiling(Slab) & shall be approved before execution of work.
2x6 Sq.mm + 1 X 4 Sq mm EARTH WIRE [Lighting Sub Main in one run]
2x10 Sq mm + 1 X 6 Sq mm EARTH WIRE [Heating Sub Main in one run]
Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating ,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(Havells/L&T/Siemens/Legrand/ABB /Schneider / eq. Make to be approved by EIC)
Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (Havells/L&T/Siemens/Legrand/ABB/Schneider / eq. Make to be approved by EIC)
Supplying and Fixing of MCB 6-Way (4+18) horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required.(Havells/L&T/Siemens/Legrand/ABB /Schneider / eq. Make to be approved by EIC)
ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance value Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 02 No. bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly Ethylene Pipe (HDPE) having Corrugation complete job.
Supply/Installation/Testing and Commissioning of 18 W LED Surface/Concealed light (TRIM CLIP ON LED PANEL 3000K Mounted Panel light luminary fitting round shape with minimum system lumen efficency of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In- built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/Crompton/H.G / eq. Make to be approved by EIC should be Commercial.
Supply/Installation/Testing and Commissioning of 1200mm sweep, ceiling fan with 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase A Supply, etc. complete as required. Havells/USHA/Orient/Crompton / eq. Make to be approved by EIC.
Supply/Installation/Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of Sizes including connection etc. Compt upto 450mm size.USHA/Havells/Polycab/LUKER USA / eq. Make to be approved by EIC.
Supply/Installation/Testing and Commissioning of Wall Mounted cubical ,front operated, compartmentalized "MAIN control panel"system fabricated of 16 gauge sheet steel, standing dust& vermin proof with gasket lockable doors, interconnections, crimpling legs bounding to earth suitable to use at 240 volt, 1phase system .The panel is painted with powder coated colour, with following equipments:- 100Amp DP MCCB of Havells/Legrand/Schneider or L&T / eq. Make to be approved by EIC with adequate kA Breaking Capacity = 01 No. Incoming Main 200 Amp D.P Al. bus bar Set= 01 Set. Panel should Also having CUT OUT for DP MCBs(Havells/Legrand/Schneider or L&T / eq. Make to be approved by EIC with adequate kA) of Including cost of : Normal Outgoing for Heating/Lighting etc Load (a) 63 Amps DP MCB = 01No. (b) 40 Amps DP MCB = 01 No. Outgoing for Load 32 Amps DP MCB = 01 No. for Inverter 40Amp = 01 No. for lighting 63Amp MCB= 01No. for Heating etc (complete job)
Supply/Laying/Testing and Commissioning of 50 sq mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havel’s /with required size of thimbles dully crimped with hydraulic crimping tool including P/Fixing of saddles/clips with making of connection and Partially OVER HEAD if required & partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench.(Havells/Polycab/RR Kabel / eq. Make to be approved by EIC)
Supply/Installation/Testing and Commissioning of 10-12 Watt Bulk Head LED Light of HGPhilips/Anchor/Havels/Orient / eq. Make to be approved by EIC.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.92 MB
BOQ_964016.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .