Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 CrAdmitted-Finance A 183 TTC INDUSTRIAL AREA KHAIRANE MIDC THANE BELAPUR ROAD NAVI MUMBAI THANE MAHARASHTRA 400705 | THANE | MAHARASHTRA | 400705 | ₹5.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.3 Cr+₹30.7 L (6.11%)Admitted-Finance | ₹5.3 Cr+₹30.7 L (6.11%) | L2 | Admitted-Finance |
| 3 | L3₹34.6 Cr+₹29.6 Cr (589.0%)Admitted-Finance D 168 MIDC TTC INDUSTRIAL AREA ROAD NO 25 MIDC SHIRAVANE THANE MAHARASHTRA 400706 | THANE | MAHARASHTRA | 400706 | ₹34.6 Cr+₹29.6 Cr (589.0%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | YEOMAN MARINE PRIVATE LIMITED L3 | Goltens India Private Limited L1 | Industrial Engineers And Manufacturers L2 |
|---|---|---|---|---|---|---|
| 1.00First Year | ||||||
| 2.00Services | ||||||
| 3.00DETROIT ENGINE (12V71) | ||||||
| 3.00 | Top overhaul - TOH LCM boats | 1 | Nos. | 8,28,296 ₹8,28,296 | 3,24,000 ₹3,24,000 | 1,25,000 ₹1,25,000 Lowest |
| 3.00 | Major overhaul - MOH LCM boats | 1 | Nos. | 14,39,816 ₹14,39,816 | 6,60,000 ₹6,60,000 | 2,45,000 ₹2,45,000 Lowest |
| 3.00 | Cylinder Block reconditioning | 1 | Nos. | 19,10,220 ₹19,10,220 | 90,000 ₹90,000 | 41,000 ₹41,000 Lowest |
| 3.00 | Crank shaft reconditioning | 1 | Nos. | 19,10,220 ₹19,10,220 | 1,20,000 ₹1,20,000 | 26,000 ₹26,000 Lowest |
| 3.00 | Flywheel & housing checking if required replacement | 1 | Nos. | 5,20,676 ₹5,20,676 | 1,02,000 ₹1,02,000 | 4,500 ₹4,500 Lowest |
| 3.01 | Cylinder head reconditioning (Each Cyl. Head) | 1 | Nos. | 2,37,336 ₹2,37,336 | 24,000 ₹24,000 | 6,500 ₹6,500 Lowest |
| 3.01 | Checking and reconditioning of main bearing bore | 1 | Nos. | 19,10,220 ₹19,10,220 | 90,000 ₹90,000 | 4,500 ₹4,500 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
8 Jul 2020, 3:00 pmClosed
Officer-in-Charge, FMU(V)
Fleet Maintenance Unit, C/o Fleet Mail Office, Naval Dockyard, Visakhapatnam
Repair Rate Contract for Detroit Engines fitted onboard ENC Ships
2020_NAVY_353608_1
PC/301/DETROIT dated 17 Jun 2020
Open Tender
Marine Services
Buy
1095 days
Fleet Maintenance Unit, Visakhapatnam
As per RFP
5 documents required · 5 mandatory
₹0
₹1.9 L
Yes
Fleet Maintenance Unit, Visakhapatnam
3 Nov 2020
17 Jun 2020
9 Jul 2020
17 Jun 2020
8 Jul 2020
17 Jun 2020
17 Jun 2020 - 8 Jul 2020
24 Jun 2020
Amount
First Year
Services
DETROIT ENGINE (12V71)
Top overhaul - TOH LCM boats
Major overhaul - MOH LCM boats
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler-Keel cooler system flushing only
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions (list of inaccessible hoses)
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Overhauling of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft rear oil seal
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working
Crankshaft deflection reading
Renewal of piston assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Overhauling of accumulator pump
Overhauling of hand charging pump
Cleaning and inspection of steering gear pump
Renewal of steering gear pump
Repair/Renewal of Sea water pump
DETROIT EDG (12V71T)
Top overhaul - TOH EDG
Major overhaul - MOH EDG
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of turbocharger (Each Turbo)
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of air cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions each one for a particular system.
Checking and calibration of pyrometer scanner, if required replace pyrometer probe with cable
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Renewal of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Electrical system checks of pyrometer and starting solenoid
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft Rear oil seal ring
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working Each
Crankshaft deflection reading
Renewal of pisotn assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Renewal of silencer
Spares
DETROIT ENGINE AND EDG
STUD, 3/8"-16/24X1 13/16"
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER, 1.125"O.D.X.656"I.D. (1.3140)
BOLT, 5/8"-11 X 6.62" 12 PT MAIN BRG CAP (1.3140)
PIN, 5/16"X3/8" DOWEL
BOLT, 5/8"-11 X 6.01" 6 PT MAIN BRG CAP (1.3140)
PLUG, 2" CUP (1.2001)
CAP, CRANKSHAFT MAIN BEARING (UNFINISHED) (1.3110)
PLUG, 5/16" SPL CUP
PLUG, 1 5/8" CUP (STAINLESS STEEL)
GASKET, 2.75"X.063" PLUG
PLUG, 2 1/4" CUP (STAINLESS) (1.1001)
PLUG, 1 1/4" CUP (1.1001)
PIN, 1/2"X1 5/8" DOWEL
PLUG, 1/4"X5/16" PIPE
CAP, CRANKSHAFT MAIN BEARING (FINISHED) (1.3110)
BOLT, 5/16"-18X1" FLG. HEX. HD. LK CTD (12.9001)
PLUG, 3/4" PIPE (12.9550)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/2" PIPE (12.9550)
DRAINCOCK, 1/4" (12.9510)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
STUD 3/8-16-24 X 1.62 LG CTD THD
BOLT, 7/16"-14X1 1/8" LOCK
PLUG, 2 1/8" CUP
PLUG, 15/16" CUP (2.7340)
FITTING, FEMALE SWIV. 3/8" HOSE 5/8"-18 (12.6692)
HOSE, #6X75" L. (7.4699)
FITTING, MALE .38" HOSE 5/8"-18 (2.5010)
CHECK VALVE ASSY. (1 PSI)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
ELBOW
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16 X 1.25"
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
SPACER, 13/32"X3/4"X1/2" (7.1581)
SLEEVE, PILOT
INSERT, VALVE (1.8330)
NOZZLE, WATER (DOUBLE OUTLET) (1.2005)
WASHER, 1/2"X15/16"X1/16" (1.8360)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
PLUG, 1/4" PIPE
WASHER, 7/16"X3/4" (2.4030)
PLUG, PIPE 1/4-18" NPTF
GUIDE, EXHAUST VALVE
PLUG, 3/4" PIPE (12.9550)
PLUG, 3/4" DIA. CUP (1.1001)
NOZZLE, WATER (SINGLE OUTLET) (1.2005)
PLUG, FUSE 1/8" PIPE SLOTTED HD. (EARLY UNITS)
TUBE KIT, INJECTOR HOLE (INCLUDES 5104701 SEAL RIN
STUD, 7/16"-14/20X2 3/32" (6.1020)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/8"-11 X 5 3/8"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X5/8"
BOLT, 1/4"-20X1/2" (W/SEAL PATCH) (12.9001)
COVER (1/4" TAPPED HOLE) (7.4597)
COVER, GOV HOLE
WASHER, 1/4" (COPPER) (2.7175)
LOCKWASHER, 5/8"
BOLT, 5/8"-11X1 3/4"
BRACKET (ITEM 3)
BOLT, 5/8"-11X4" (12.9001)
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/8" (12.9001)
BRACKET (L. AND R. BANK)
DOWEL, 9/16"X1 5/8"
PLUG, 1/8"-27 PIPE SQ. SOC. (12.9550)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
CRANKSHAFT
SLINGER (1.3050)
BOLT, 1"-14X2 3/4" (1 1/2" HEX. HD.)
WASHER, 1 1/16"X1 3/4" (USE WITH 1 1/2" HEX.HD.BOL
CAP (USED WITH 1 1/2" HEX. HEAD BOLT)
SHELL SET (STD.) (NON-SLOTTED UPPER)
SHELL SET (.002" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.010" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.020" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.030" U.S.) (NON-SLOTTED UPPER)
SHELL SET (STD.) (SLOTTED UPPER)
SHELL SET (.002" U.S.) (SLOTTED UPPER)
SHELL SET (.010" U.S.) (SLOTTED UPPER)
SHELL SET (.020" U.S.) (SLOTTED UPPER)
SHELL SET (.030" U.S.) (SLOTTED UPPER)
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
STABILIZER (ITEM B)
STABILIZER (ITEM C)
STABILIZER (ITEM E)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (R.H. HELIX, R.H. ENGINE ROTATION) (ETCHED 89
LOCKWASHER, 1/2"
BOLT, 3/8"-16X1 5/8"
BOLT, 1/2"-13X2 3/4"
COVER (PLAIN) (ITEM 5)
SEAL OIL CR/SHF. FRONT RH. ROT. (RED)
SEAL, CRANKSHAFT FRONT OIL-RH ROTATION (FOR SUSTAI
GASKET
BOLT, 7/16"-20X1" (12.9001)
DOWEL, 7/16"X1"L.
HUB ASSY.
CONE (.531"L.)
CONE, VIBRATION DAMPER REAR
KEY, 3/8"X1" WOODRUFF (1.3280)
PULLEY (7.50" DIA., 3 GROOVES) (ITEM 10)
DECAL, BOLT TORQUE 450 FT. LBS.- YELLOW
RETAINER, 1 1/32"I.D.X2 3/8"O.D.X1/2" THK.
BOLT, 9/16"-18X2.75"
PLATE, SCUFF 12 BOLT 2.88 ID (1.4001)
FLYWHEEL ASSY. (SAE #1) (NC)
LOCKWASHER, 3/8"
BOLT, 1/2"-13X3 1/4" (12.9001)
SHIM, IDLER BOSS (.0095"-.0105" THK.)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
WASHER, .53 X 1.00 (1.5001)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT, 3/8"-16X1.135" (12.9001)
BOLT 3/8"-16 X 1.25 LG HEX
BOLT 3/8"-24 X 3.750",HEXFLGHD
SEAL, OIL (RR CR/SHFT STD RH ROT ENGINE SINGLE DUST LIP; .58" WIDE)
SEAL, CR/SHF O.S. RH SINGLE DUST LIP .58" WIDE ( USE W/23507225 SLEEVE)
BOLT, 7/16"-20X3.52"
ROD ASM, CONNECTING (CR/HD, Y-DRILL)
SHELL SET (STANDARD)
SHELL SET (.002" U.S.)
SHELL SET (.010" U.S.)
SHELL SET (.020" U.S.)
SHELL SET (.030" U.S.)
RING SEAL, SKIRT TO DOME
SKIRT CR/HD PISTON
PISTON KIT DOME CR/HD (18.7:1)
PISTON KIT CR/HD (18:1)
RING SET, PISTON STD GAP
RING (UPPER & LOWER COMPRESSION)
PIN ASSY. (NON-TURBO)
SPACER
BOLT, 7/16"-20X2.00" L. (12 POINT)
BEARING, (SLIPPER TYPE)
RETAINER
LINER, 1.05" PORT #1
LINER, 1.05" PORT #2
LINER, 1.05" PORT #3
LINER, 1.05" PORT #4
LINER, 1.05" PORT .005" O.S.
LINER, 1.05" PORT .010" O.S.
LINER, 1.05" PORT .020" O.S.
LINER, 1.05" PORT .030" O.S.
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) #2 STD GAP
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #3
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #4
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) .010 O/S
CYLINDER KIT CR/HD (18.7:1) (1.05 PORT) .020 O/S
INSERT, .1810" THRU .1815" THK. FOR STD. THRU .005
INSERT, .1780 THRU .1785" THK. FOR STD. THRU .005"
INSERT, .1795" THRU .1800" THK. FOR STD. THRU .005
INSERT, .1795" THRU .1800" THK. FOR .010, .020, .0
INSERT, .1760" THRU .1755" THK. FOR STD. THRU .005
INSERT, .1715" THRU .1720" THK. FOR STD. THRU .005
INSERT, .1755" THRU .1760" THK. FOR .010", .020",
INSERT, .1715" THRU .1720" THK. FOR .010", .020",
INSERT, .1810" THRU .1815" THK. FOR .010, .020, .0
INSERT, .1780" THRU .1785" THK. FOR .010", .020",
CAMSHAFT ASSY. (RIGHT BANK, R.H. ENG.) (STAMPED 51
CAMSHAFT ASSY. (LEFT BANK, R.H. ENG.) (STAMPED 511
END BEARING
END BEARING
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1.25"
BEARING, REAR (STD.)
BUSHING (STD.)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
BEARING SET (STD.)
BOLT, 3/8"-24X.62"
SEAL OIL LIP TYPE CAMSHF FRT
PULLEY
LOCKWASHER, 1 1/8"
KEY, 1/4"X3/4" WOODRUFF (12.9350)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (L.H. HELIX) (LEFT BANK) (REAR)
GEAR (R.H. HELIX) (RIGHT BANK)(REAR)
GEAR (RIGHT BANK) (FRONT) (66 TEETH)
SPACER, CAMSHAFT PULLEY FRONT
BOLT, 3/8"-24X1"
RETAINER
GEAR ASSY. (L.H. HELIX)
GEAR (L.H. HELIX)
BEARING
BOLT, 5/16"-24X1/2" (VIBRA-TITE COATED)
RETAINER
BOLT, 1/2"-13X2"
BOLT, 1/2"-13X2 1/2"
HUB & DOWEL ASM IDLER GEAR
DOWEL (1.7250)
WASHER, 17/32"X7/8"X3/32"
COVER ASSY. (INCL. DOWEL PINS)
COVER (4.1290)
SCREW, 5/16"-18X3/4" SE LF TAP., HEX. HD. (12.9066
ARM ASSY. (LEFT)
ARM ASSY. (RIGHT)
ARM ASSY.INJECTOR (UNBUSHED CLEVIS)
BUSHING VLV RKR ARM LRG
BUSHING INJ RKR ARM LRG
BUSHING, .0015" U.S. I.D.
BUSHING VLV RKR ARM SMALL
BUSHING, .0015" U.S.I.D.
CLEVIS
BUSHING, .44"I.D.X.56"O.D.
PIN (PUSH ROD END)
PLUG, 11/32" SPECIAL (1.8160)
SHAFT ASSY. (INCLUDES PLUG)
BRACKET
BOLT, 1/2"-13X4 1/4"
NUT, 5/16"-24 LOCK
SPRING (2 5/8" FREE LENGTH, .177" WIRE DIA.11 COIL
SEAT (VALVE)
RETAINER (SNAP RING)
CAM FOLLOWER ASSY. (INCLUDES ROLLER SET)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4" (12.9001)
GUIDE, CAM ROLLER
VALVE KIT (FOUR VALVE) (IDENTIFICATION "U")
GUIDE, EXHAUST VALVE
SEAL ASSY.
INSERT (.010" O.S.) (4 VALVE CYLINDER HEAD)
SPRING (1.97" FREE L. 8.8 COILS, R.H. HELIX, .148"
BRIDGE, EXHAUST VALVE (1.8343)
SCREW, 5/16"-24X1" (ADJUSTING)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
WASHER, 1/2"X15/16"X1/16" (1.8360)
LOCK (HALVES)
COVER, CAST 12V
KIT, 12V, ONE BANK
INJECTOR MUI N60, NC SERIES
INJECTOR MUI N80, NC SERIES
INJECTOR MUI N90, NC SERIES
INJECTOR ASSY.(7N65)
INJECTOR MUI N70, NC SERIES
INJECTOR MUI N55, NC SERIES
SERVICE KIT (WIRE MESH FILTER) (MUI)
BOLT, 3/8"-16X1/2"
CLAMP
WASHER, INJECTOR CLAMP
CAGE, INJ VALVE SPRING
SPRING
VALVE KIT
TIP ASSY. (5D45)
CAGE, INJ CHECK VALVE
VALVE, INJ CHECK
RETAINER, INJ GEAR
RACK ASM
PIN, BUSHING GUIDE
PLUNGER AND BUSHING ASSY. (5N65)
GASKET, INJ FILTER CAP
ELEMENT, INJ FILTER
PIN, STOP
SPRING, INJ PLUNGER
FOLLOWER
DEFLECTOR, SPILL
SEAL, INJ (VALVE NUT TO BODY)
VALVE NUT
DOWEL
TAG, NUMBER (BLANK)
BODY ASM
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
PUMP KIT (L.H., 3/8" INLET, HIGH CAP)
KIT, FUEL PUMP OVERHAUL 3/8 IN GEAR
KIT, FUEL PUMP OVERHAUL 1/4 IN GEAR
STRAINER ASSY. (T-80)
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BRACKET
PIPE ASSY. (LONG) (2.4020)
PIPE ASSY. (SHORT) (2.4020)
TUBE ASM FUEL CYL HEAD TO INJECTION (SHORT)
TUBE ASM FUEL CYL HEAD TO INJECTOR (LONG)
CONNECTOR
WASHER, 7/16"X3/4" (2.4030)
HOSE, BULK #8X25 FT. (12.8550)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.)(STRAIGHT)
CONNECTOR, 1/2" INV. FL. TUBE; 3/8" PIPE (12.9460)
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.) (45 DEG.)
ELBOW, 1/2"-45 DEG. INV. FL. TUBE; 3/8" PIPE
HOSE, BULK #6X25 FT. (12.8550)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.)(STRAIGHT)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.) (90 DEG.)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
TUBING, SPIRAL WRAP 15 IN
LOCKWASHER, 1/4"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X7/8"
CLIP, 3/8" BOLT (12.8554)
BOLT, 1/4"-28X.62" (12.9001)
TEE, 1/4"X1/4"X5/8" (7.4694)
BUSHING PIPE RED 3/8 PTF 1/4 ZINC
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
STRAP, NYLON (2.5255)
GOVERNOR ASSY. (VARIABLE SPEED) MECHANICAL(LCM)
SCREW, #4X3/16" RD. HD. DRIVE
PLATE
SCREW ASSY., 1/4"-20X1" (W/LW) (12.9025)
SCREW (INCL. SPRING RETAINING GROOVE)
COVER ASSY.
PIN, 1/4"X3/4" ROLL (12.9275)
COVER ASSY. (2.7045)
PIN, 5/32"X7/8" SPRING (12.9270)
SHAFT ASSY.
GASKET
PLUG, 1 1/16" EXPANSION
TUBE, CONTROL LINK COVER (2.7230)
HOUSING ASSY. (INCLUDES TUBES) (2.7235)
PIN, 3/16"X7/16" DOWEL (2.7230)
SHAFT ASSY.
SHAFT
WASHER, #10
SPACER, .562"O.D.X1.770"L.
BEARING (UPPER)
BEARING (LOWER)
LEVER
SCREW, (GAP ADJUSTING)
PIN, 5/16" DIA.X29/32"L.
LEVER ASSY. (INCLUDES PIN IN 2.7315)
BEARING (2.7440)
LEVER ASSY.
PIN, .309"X3.12" L.
CLIP, GOVERNOR CONTROL SHAFT LOCK
PIN, .375"X2" L.
WASHER (2.7430)
CARRIER AND WEIGHT ASSY.
SHAFT AND CARRIER ASSY.
SHAFT
WEIGHT ASSY.
WASHER, .384"I.D.X11/16"O.D.X.033" THK. (2.7430)
RING, RETAINER .347"I.D.X.048"X.048" THK. (2.7430)
PIN (RING GROOVE)
RISER
BEARING, .551" W.
SCREW 5/16"-24X3/8"L.
LOCKWASHER, 21/64"
WASHER, 21/64" (2.7310)
BEARING
LOCKWASHER, 5/16"
BOLT, 5/16"-18X3 1/2"
BOLT ASSY., 1/4"-20X3/4" (W/LW) (12.9001)
PLUG, .696" EXPANSION (12.9330)
LEVER BRG & RLR ASM VAR SPD SPR (OBSOLETE)
SHAFT
SEAL RING, .477"I.D.X.113" THK. (YELLOW PAINT)
KEY, 3/32"X1/2" WOODRUFF (12.9350)
SCREW, 5/16"-24X1/4" SET
SCREW, 1/4"-20X1 1/2" (IDLE SPEED ADJUSTING SCREW)
NUT, 1/4"-20 LOCK (12.9120)
GASKET
SPRING (TWO RED STRIPES)
PLUNGER, 1.54"L.
GUIDE
RETAINER
STOP (WITH STEP)
SCREW ASSY. (WITH SPRING)
SPRING (2.7810)
NUT, 3/8"-24 LOCK (12.9140)
NUT, 1/4"-28 JAM
TUBE ASSY. (LEFT BANK) (12V-71)
TUBE ASSY. (RIGHT BANK) (12V-71)
LW 1/4" CAD
BOLT, 1/4"-20X5/8"
BRACKET
PIN, 1/8"X7/8" GROOVE (12.9270)
SHAFT (1.88" L.)
SHAFT (1.06" L.)
PIN, 1/8"X3/4" GROOVE (12.9270)
LEVER
SPACER
SPRING (L.H. HELIX) (GREEN)
SPRING (R.H. HELIX) (ORANGE)
SPRING, RETURN (GREEN)
NUT, 1/4"-28 JAM
SCREW, 1/4"-28X.90"
LEVER
PIN, 1/16"X1/2" COTTER
LINK (SHORT) (LEFT BANK)
LINK (LONG) (RIGHT BANK)
LOCKWASHER, 3/8"
BOLT, 3/8"-16X1 1/4"
SPACER (2.3530)
BRACKET
SPRING, 3,4,6,8V53
SPRING (8.59" L.)
ROD END EYE, 3/8"-16X4.23" L.
EYE (1/4"X5 3/4" L.)
BOLT, 5/16"-24X5/8" (2.9345)
NUT, 7/16" (SPRING HANGER)
NUT, 5/8" (SPRING HANGER)
BRACKET (2.9405)
SPRING (2.9405)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8" (12.9001)
LEVER
HOUSING ASSY. (REAR) (12V)
HOUSING ASSY. (FRONT) (12V)
WASHER, 1/4" (COPPER) (2.7175)
BOLT, 1/4"-20X9/16"
LOCKWASHER, 3/8"
WASHER, 3/8"
BOLT, 3/8"-16X3"
BOLT, 3/8"-16X1.135" (12.9001)
BOLT, 3/8"-16X1 1/8"
HOUSING
PLUG, 3/8" CUP (12.9320)
GASKET (3.3030)
PLATE
PIN, 1/8"X11/16" ROLL (12.9275)
VALVE ASSY. (INCLUDES 5128841 VALVE)
SPRING, HINGE (3.3070)
VALVE
HINGE, VALVE
PIN, SPRING (3.3070)
SHAFT (14"L.)
WASHER, 7/16" (3.4001)
RING, SEAL (2.4225)
SPRING (VALVE)
SPRING (LATCH)
LW 1/4" CAD
PW, 1/4" STL ZINC
BOLT, 1/4"-20X1 1/2"
LATCH
SPACER, 17/64"X7/8"
PLATE, WARNING
BUSHING, ECCENTRIC
LOCKWASHER, 5/16"
PIN, 1/8"X1 1/2" COTTER
BOLT, 5/16"-18 X 1 1/4"
PIN, 1/8"X1" ROLL (12.9275)
COUPLING
LEVER
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8"
HOUSING
ROTOR ASSY. (RH HELIX)
ROTOR ASSY. (LH HELIX)
PLUG, 15/16" CUP (2.7340)
PIN, 1/4"X1 3/4" GROOVE (12.9270)
SHAFT, 4.22" L. (REAR)
SHAFT ASSY.(INCLUDES PLUG)
PLUG, 7/8" CUP (4.8001)
BOLT, 1/4"-20X3/4" (12.9001)
BEARING, BALL DBL. ROW (REAR)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4"
RETAINER
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
GEAR SET
SCREW, 5/16"-18X1 1/2" FIL. HD. SL.
STRAINER, OIL
SLEEVE
PIN, .308"X2" DOWEL
PIN, 5/16"X7/8" DOWEL (12.9290)
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
SEAL KIT
BLOWER KIT (12V) (TURBO AND NON-TURBO)
BLOWER KIT (SMALL BEARING)
SPROCKET
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
SPROCKET
PLUG, 1/4" PIPE
BOLT, 3/8"-24 X 1" (3.4105)
CHAIN, 1/4" W., 10.28" L. ENDLESS
BOLT, 1/2"-20X1 1/4"
LOCKWASHER, 1/2" EXT. TOOTH (3.4080)
SPACER
HUB (48 TEETH) (3.4130)
PLATE, SPRING (3.4135)
BOLT, 3/8-24 X .925 LG SHDR LOCK
SPACER, .385" I.D.X1" O.D.X.013" THK. (3.4137)
LOCKWASHER, 5/16"
COVER
SEAL RING, 1/4" TUBE (12.9435)
COVER KIT
SEAL, 4.32"X4.88"X.77"
TUBE ASSY.,OIL (BLOWER DRIVE SUPPORT)
CLAMP ASSY. (T-BOLT)
GEAR ASSY. (L.H. HELIX; 38 TEETH) (3.4300)
BEARING, THRUST BLOWER DRIVE GEAR
WASHER, THRUST
BOLT, 3/8"-24X7/8"
PIN, 1/8"X1/4" SPRING (12.9270)
WASHER, 3/8"X9/16" (COPPER)
BOLT 3/8-24 X 1.1875 LG
BALL CHROME
SUPPORT ASSY. (3.4350)
BUSHING, DRIVE GEAR BLOWER OR ACSRY
GASKET, BLOWER DRIVE SUPPORT
LOCKWASHER, 5/16"
BOLT, 5/16"-24X1 5/8"
COUPLING ASSY.
SUPPORT
CAM, 1.41" THK.
RETAINER
SHAFT, .790" DIA. X 5" L. NITRIDED (12V)
RING, RETAINING
BODY ASSY. (PRESSURE)
SHAFT
SHAFT
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
COVER ASSY.
BUSHING
GASKET (2.44" B.C.)
GASKET
FLANGE
COVER (4.1290)
COVER
BOLT 3/8"-16X1.015" (12.9001)
GASKET
KEY, 3/16"X3/4" WOODRUFF
GEAR (1.2 TO 1, 79 TEETH)
GEAR (1.5 TO 1 RATIO, 86 TEETH)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
GEAR (1.5 TO 1 RATIO, 57 TEETH)
BOLT, 3/8"-16 X 1"
PIPE (12V)
GASKET (2.88" B.C.) (4.1520)
GASKET (2 21/32" B.C.)
WASHER, 3/8"
SCREEN
SPACER, 13/32"X7/8"X1" (8.3826)
BOLT, 3/8"-16X2 1/2" LOCK (12.9001)
NUT, 3/8"-24 LOCK (12.9140)
BRACKET, CLIP (4.1510)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT 3/8-24 X 1.1875 LG
COVER
BOLT, 3/8"-16X1 5/8"
JUNCTION BLOCK (PUMP TO CYLINDER BLOCK) (4.1580)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE ASSY., #4X11.12" L. (5.1003)
HOSE ASSY. (19" L.) (2.5050)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR 1/8 NPTF BRASS .025 RESTR
REGULATOR ASSY. (12V, 16V) (4.1671)
RELIEF VALVE ASSY.
LOCKWASHER, 7/16"
BOLT, 3/8"-16X1 3/8"
INSERT, FILTER ADAPTOR (4.2240)
ADAPTOR ASSY.
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
FILTER ASSY., LUB OIL SPIN
ADAPTOR
BOLT, 7/16"-14X1 1/4"
PLUG, 1/4" PIPE
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
VALVE (DISC)
SPRING
CORE ASSY. (24 PLATE)
HOUSING
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
DRAINCOCK, 1/4" (12.9510)
COVER (REAR)
WASHER, 21/64" SPECIAL COPPER (4.7120)
VALVE
SPRING (4.1260)
HOSE, BULK 2 7/8"X4 1/2" L.
CLAMP, 2 9/16"-3 1/2" CLAMPING RANGE (12.9660)
CLAMP, 2 1/16"-3" CLAMPING RANGE (12.9660)
PLUG, 3/4" PIPE SQ. SOC. SCOTCHGRIP
ELBOW
SEAL, 3.60" O.D.X.62" W.
CLAMP, 3 1/2" DIA. HOSE (T-BOLT)
ELBOW, 90 DEG. 1' FLD TUBE 3/4" NPTF
HOSE, #16X20' L. (12.8550)
FITTING, #16 HOSE (1 5/16"12 STRAIGHT SWIVEL)
ELBOW, 1"-45 DEG. ST.
CONNECTOR, 5/8" FL. TUBE, 3/4" PT. (8.3800)
CLIP, 1 1/8" TUBE, 7/16" BOLT (5.5390)
CAP, OIL FILLER
STRAINER
HOOK, CHAIN ("S" TYPE) (4.5020)
GUIDE (1.50" L.)
ADAPTOR (21.70" DEV. L.)
BOLT, 3/8"-24X3/4"
BRACKET, SUPPORT
CLIP, 1/2" TUBE, 3/8 BOLT
WASHER, 7/16"
BOLT, 3/8"-16X4 1/4" (12.9001)
BOLT, 3/8"-16X6"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X1 1/4"
BOLT, 3/8"-16X5 1/2"
PLUG, 1/2"-14 PIPE (12.9550)
BOLT, 3/8"-16X1.38" (12.9001)
PAN (STAMPED) (12V)
WASHER, 3/8"X9/16" (COPPER)
FLANGE
TUBE (DEV. L. 15.17")
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X4 3/4" (12.9001)
SHELL
ELEMENT, BREATHER
GASKET
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/2"
BOLT, 7/16"-14 X 5.25"
BOLT, 7/16"-14X5" (12.9001)
RING, SEAL (.139"X5.109" I.D.)
PLUG, 1/2"-14 PIPE (12.9550)
PUMP ASSY.
COVER
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
SHAFT (MARKED "TU" ON END)
BEARING
BEARING
LOCKRING (5.4235)
WASHER, 7/16" (12.9200)
IMPELLER (MILLED-FACE)
NUT, 7/16"-20 LOCK (5.1120)
GEAR, WATER PUMP 42 TEETH LH HELIX
KIT, RECONDITIONING (W/UNITIZED SEAL, MILLED-FACE
REPLACEMENT KIT, IMPELLER INSERT
LOCKWASHER, 3/8"
MANIFOLD (FRONT & REAR) (8V)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
GASKET, WATER OUTLET PORTS (5.2010)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
PLATE, WATER OUTLET PORTS
THERMOSTAT 170 DEGREE 12V71/16V92TA
WASHER, 3/8"
BOLT, 3/8"-16X1 1/2"
BOLT, 7/16"-14X1 1/8" (12.9001)
HOUSING (LEFT BANK)
RETAINER, VENT SEAL (IN CYL. HD.)
WASHER, 7/16"X3/4" (2.4030)
WASHER, 3/8"X9/16" (COPPER)
RING, SEAL (2.4225)
DRAINCOCK, 1/4" (12.9510)
HOUSING (RIGHT BANK)
PIN, JIGGLE
COVER (RIGHT BANK)
COVER (LEFT BANK)
BOLT, 3/8"-16X3.50"
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE, 2 3/4"X24" L. (TO HSG.) (5.3330)
MANIFOLD (HEAT EXCHANGER COOLING UNITS)
TUBE (16.64" L.)
CLAMP, 1.75"-2.62" DIA. HOSE
HOSE, 2"I.D.X2.50" L. (5.2165)
BOLT, 3/8"-16X1 1/8"
ELBOW
CLAMP HOSE 3.5 - 4.0 ID LINER
BUSHING, RED 1X3/4" (12.9570)
ELBOW, 3/4" PIPE TO 1" HOSE (W/1/4" DRAIN) (5.3430
CONNECTOR, 3/4" PIPE TO 1" HOSE (5.1235)
DRAINCOCK, 3/8" (12.9510)
ELBOW, 1" PIPE (5.3430)
HOSE, 1" I.D.X30" L. (4.1642)
HOSE, 1"I.D.X2.50"L. (5118149)
CLAMP, 1 1/2" I.D. (12.9660)
TANK ASSY.
COVER (OUTLET) (5.5020)
COVER ASSY.
COVER
GASKET
GASKET
BRACKET (UPPER)
BRACKET (LOWER)
NECK (1.69" DIA.) (WITH 2 1/16" I.D. CAP)
TUBE (DEV. L. 4 1/4") (2.2300)
ELBOW, 5/16"-90 DEG. INV. FL. TUBE (12.9480)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
MANIFOLD ASSY.
GASKET (INTERMEDIATE)
GASKET
WASHER, (DISHED) 7/16" (6.1001)
STUD, 7/16"-14/20X2 3/32" (6.1020)
LOCKWASHER, 3/8"
PLUG, 1/8" PIPE (12.9550)
BOLT, 3/8"-16X2 1/4"
FLANGE, 4"
GASKET (FLANGE)
WASHER, .53"X.94"X.12" (1.3140)
GEN CHRG AC 24V70A NG 22SI DELCO CW/CCW
PULLEY (2.76" DIA., 2 GROOVE)
PULLEY (6.29" DIA., 3/8 GROOVE)
BELT SET, .380"W.X47"L. (2 BELTS)
BRACKET
BRACKET (LOWER)
BRACKET
SWITCH (PUSH-BUTTON)
SHAFT ASSY. (60" L.)
HOSE ASSY., 1/2"I.D.X15 21/32"L. (12.4065)
CONN 1/4 FLD TUB 1/8 NPTF BRS CTD
CONNECTOR 1/8 NPTF BRASS .025 RESTR
CONNECTOR
BUSHING, 1/4"X1/8" RED. (12.9570)
LOCKWASHER, 1/2"
SUPPORT
PAD, BREATHER
RETAINER, BREATHER PAD (1" DIA.)
RETAINER, BREATHER PAD (1.36" DIA.)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BUSHING, 3/4"X3/8" RED. (12.9570)
BLOCK ASSY. (W.B.P.) (12V)
GASKET KIT (MARINE SUPPLEMENTARY)) (12V71)
GASKET KIT (ENGINE OVERHAUL)(12V71)
CLAMP, 1"-1 1/2" CLAMPING RANGE (12.9660)
OIL PUMP, 12V71 LH, NON-SCAVENGING
GASKET BREATHER
HOSE, 3.50"X4.50" L.
PUMP ASSY. (JABSCO)
SECONDARY FILTER
SHAFT ASSY. (180"L.)
TACHOMETER DRIVE SHAFT
GASKET
CORE (DOUBLE OUTLET)
ELECTRODE (2 1/8"L.)
SEAL RING
COVER (INLET
GLAND
CAP,(7# PRESSURE)
COVER (OUTLET) (5.5550)
VALVE ASSY. (24V.) (NORMALLY OPEN) Governor
BLOWER 12V71 TURBO
AFTER COOLER CHARGE AIR
RETAINER, 13/64" SPRING (12.9460)
GASKET
WASHER, 11/16"X1/8" (2.7290)
BOLT, 5/16"-18X2 1/16"
WASHER, 11/16"X1/8" (2.7290)
ELBOW
BOLT, 1/2"-13 X 1.50"
PLUG, FUSE (1/4"-18 RECESSED SOC. HD.) (OBSOLETE)
PLATE, SCUFF
DAMPER
KEY, 1/4"X1" WOODRUFF (OBSOLETE)
GASKET
BRACKET
FITTING 2PCS
HOUSING
GASKET
WASHER (PACKING RETAINER)
BEARING (ROLLER)
SILENCER-I
CONNECTOR
CHAIN 20INCH
SEAL THERMOSTAT DETROIT
GENERATOR, 24V., 65 AMP (C.W./C.C.W.)
HI-TACK GASKET SEALANT (16OZ BRUSH TOP CAN)
SEALANT, ULTRA BLUE RTV 3 OZ.
GAGE OIL CHR
GAGE, WATER TEMP 265F, 372" CAPILLARY
DRIVE
GAGE, TACH 3000RPM W/O HOUR METER BLACK
Primary filter (Racor make 2020 1000FH (water saparator)
STARTAR MOTAR HYDRAULIC (LCM)
STEERING GEAR PUMP (LCM)
CLUTCH CABLE (LCM)
THROTLE CONTROL CABLE/SHAFT (LCM)
ACCUMULATOR PUMP (LCM)
ACCUMULATOR HAND CHARGING PUMP (LCM)
SWITCH WATER TEMPREATURE WITH CAPILARY(EDG)
SWITCH ASSY LUBE OIL PRESSURE DEFFERENTIAL( EDG)
TURBO CHARGER ASSY,(AFT EDG)
50MT 24 V/STARTING MOTAR ELCT 24V(EDG)
GOVERNOR HYDRAULIC WOODWORD(EDG)
TURBO CHARGER ASSY,(FWD EDG).
COVER
GAGE ASM
GAGE, OIL PRESSURE 150 PSI MECHANICAL CHROME
STUD 3/8-16-24 X 1.625 LG CTD THD
CYLINDER HEAD ASSY.
SEAL, CRANKSHAFT FRONT OIL-LH ROTATION (FOR SUSTAI
HOUSING (SAE #1)
RING SEAL (FORMER STYLE)
RING, FIRE NO GROOVE KEYSTONE
REMANUFACTURED 05197613
HUB ASSY.
ROLLER SET
INSTALLER, EXHAUST VALVE SEAL (2 VALVE)
COVER, CAST 12V
DECAL FUEL FILTER
FILTER ELEMENT oil filter
ELBOW, 1/2"-90 DEG. INV. FL. TUBE (OBSOLETE)
ELBOW, 5/16" (.065" RESTRICTION) (2.5210)
GEAR (1.2 TO 1 RATIO, 64 TEETH)
GEAR (64 TEETH) (OBSOLETE)
DIPSTICK (X-28.00", Y-1.75", Z-25.44")(23513087)
PAN ASSY. (CAST IRON) (12V)
HOSE (2 1/2"I.D.X2 1/4"L.)
SEALANT, RTV 305 ML. (10.3 FL. OZ.)
SEAL, OIL (SGL. LIP) (.525" WIDE)
ENGINE OVER SPEED SENSOR/SWITCH(EDG) GOVERNOR ASSY. (ELECTRIC)
PYROMETER
SCANNER
Second Year
Services
DETROIT ENGINE (12V71)
Top overhaul - TOH LCM boats
Major overhaul - MOH LCM boats
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler-Keel cooler system flushing only
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions (list of inaccessible hoses)
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Overhauling of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft rear oil seal
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working
Crankshaft deflection reading
Renewal of piston assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Overhauling of accumulator pump
Overhauling of hand charging pump
Cleaning and inspection of steering gear pump
Renewal of steering gear pump
Repair/Renewal of Sea water pump
DETROIT EDG (12V71T)
Top overhaul - TOH EDG
Major overhaul - MOH EDG
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of turbocharger (Each Turbo)
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of air cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions each one for a particular system.
Checking and calibration of pyrometer scanner, if required replace pyrometer probe with cable
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Renewal of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Electrical system checks of pyrometer and starting solenoid
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft Rear oil seal ring
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working Each
Crankshaft deflection reading
Renewal of pisotn assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Renewal of silencer
Spares
DETROIT ENGINE AND EDG
STUD, 3/8"-16/24X1 13/16"
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER, 1.125"O.D.X.656"I.D. (1.3140)
BOLT, 5/8"-11 X 6.62" 12 PT MAIN BRG CAP (1.3140)
PIN, 5/16"X3/8" DOWEL
BOLT, 5/8"-11 X 6.01" 6 PT MAIN BRG CAP (1.3140)
PLUG, 2" CUP (1.2001)
CAP, CRANKSHAFT MAIN BEARING (UNFINISHED) (1.3110)
PLUG, 5/16" SPL CUP
PLUG, 1 5/8" CUP (STAINLESS STEEL)
GASKET, 2.75"X.063" PLUG
PLUG, 2 1/4" CUP (STAINLESS) (1.1001)
PLUG, 1 1/4" CUP (1.1001)
PIN, 1/2"X1 5/8" DOWEL
PLUG, 1/4"X5/16" PIPE
CAP, CRANKSHAFT MAIN BEARING (FINISHED) (1.3110)
BOLT, 5/16"-18X1" FLG. HEX. HD. LK CTD (12.9001)
PLUG, 3/4" PIPE (12.9550)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/2" PIPE (12.9550)
DRAINCOCK, 1/4" (12.9510)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
STUD 3/8-16-24 X 1.62 LG CTD THD
BOLT, 7/16"-14X1 1/8" LOCK
PLUG, 2 1/8" CUP
PLUG, 15/16" CUP (2.7340)
FITTING, FEMALE SWIV. 3/8" HOSE 5/8"-18 (12.6692)
HOSE, #6X75" L. (7.4699)
FITTING, MALE .38" HOSE 5/8"-18 (2.5010)
CHECK VALVE ASSY. (1 PSI)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
ELBOW
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16 X 1.25"
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
SPACER, 13/32"X3/4"X1/2" (7.1581)
SLEEVE, PILOT
INSERT, VALVE (1.8330)
NOZZLE, WATER (DOUBLE OUTLET) (1.2005)
WASHER, 1/2"X15/16"X1/16" (1.8360)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
PLUG, 1/4" PIPE
WASHER, 7/16"X3/4" (2.4030)
PLUG, PIPE 1/4-18" NPTF
GUIDE, EXHAUST VALVE
PLUG, 3/4" PIPE (12.9550)
PLUG, 3/4" DIA. CUP (1.1001)
NOZZLE, WATER (SINGLE OUTLET) (1.2005)
PLUG, FUSE 1/8" PIPE SLOTTED HD. (EARLY UNITS)
TUBE KIT, INJECTOR HOLE (INCLUDES 5104701 SEAL RIN
STUD, 7/16"-14/20X2 3/32" (6.1020)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/8"-11 X 5 3/8"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X5/8"
BOLT, 1/4"-20X1/2" (W/SEAL PATCH) (12.9001)
COVER (1/4" TAPPED HOLE) (7.4597)
COVER, GOV HOLE
WASHER, 1/4" (COPPER) (2.7175)
LOCKWASHER, 5/8"
BOLT, 5/8"-11X1 3/4"
BRACKET (ITEM 3)
BOLT, 5/8"-11X4" (12.9001)
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/8" (12.9001)
BRACKET (L. AND R. BANK)
DOWEL, 9/16"X1 5/8"
PLUG, 1/8"-27 PIPE SQ. SOC. (12.9550)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
CRANKSHAFT
SLINGER (1.3050)
BOLT, 1"-14X2 3/4" (1 1/2" HEX. HD.)
WASHER, 1 1/16"X1 3/4" (USE WITH 1 1/2" HEX.HD.BOL
CAP (USED WITH 1 1/2" HEX. HEAD BOLT)
SHELL SET (STD.) (NON-SLOTTED UPPER)
SHELL SET (.002" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.010" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.020" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.030" U.S.) (NON-SLOTTED UPPER)
SHELL SET (STD.) (SLOTTED UPPER)
SHELL SET (.002" U.S.) (SLOTTED UPPER)
SHELL SET (.010" U.S.) (SLOTTED UPPER)
SHELL SET (.020" U.S.) (SLOTTED UPPER)
SHELL SET (.030" U.S.) (SLOTTED UPPER)
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
STABILIZER (ITEM B)
STABILIZER (ITEM C)
STABILIZER (ITEM E)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (R.H. HELIX, R.H. ENGINE ROTATION) (ETCHED 89
LOCKWASHER, 1/2"
BOLT, 3/8"-16X1 5/8"
BOLT, 1/2"-13X2 3/4"
COVER (PLAIN) (ITEM 5)
SEAL OIL CR/SHF. FRONT RH. ROT. (RED)
SEAL, CRANKSHAFT FRONT OIL-RH ROTATION (FOR SUSTAI
GASKET
BOLT, 7/16"-20X1" (12.9001)
DOWEL, 7/16"X1"L.
HUB ASSY.
CONE (.531"L.)
CONE, VIBRATION DAMPER REAR
KEY, 3/8"X1" WOODRUFF (1.3280)
PULLEY (7.50" DIA., 3 GROOVES) (ITEM 10)
DECAL, BOLT TORQUE 450 FT. LBS.- YELLOW
RETAINER, 1 1/32"I.D.X2 3/8"O.D.X1/2" THK.
BOLT, 9/16"-18X2.75"
PLATE, SCUFF 12 BOLT 2.88 ID (1.4001)
FLYWHEEL ASSY. (SAE #1) (NC)
LOCKWASHER, 3/8"
BOLT, 1/2"-13X3 1/4" (12.9001)
SHIM, IDLER BOSS (.0095"-.0105" THK.)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
WASHER, .53 X 1.00 (1.5001)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT, 3/8"-16X1.135" (12.9001)
BOLT 3/8"-16 X 1.25 LG HEX
BOLT 3/8"-24 X 3.750",HEXFLGHD
SEAL, OIL (RR CR/SHFT STD RH ROT ENGINE SINGLE DUST LIP; .58" WIDE)
SEAL, CR/SHF O.S. RH SINGLE DUST LIP .58" WIDE ( USE W/23507225 SLEEVE)
BOLT, 7/16"-20X3.52"
ROD ASM, CONNECTING (CR/HD, Y-DRILL)
SHELL SET (STANDARD)
SHELL SET (.002" U.S.)
SHELL SET (.010" U.S.)
SHELL SET (.020" U.S.)
SHELL SET (.030" U.S.)
RING SEAL, SKIRT TO DOME
SKIRT CR/HD PISTON
PISTON KIT DOME CR/HD (18.7:1)
PISTON KIT CR/HD (18:1)
RING SET, PISTON STD GAP
RING (UPPER & LOWER COMPRESSION)
PIN ASSY. (NON-TURBO)
SPACER
BOLT, 7/16"-20X2.00" L. (12 POINT)
BEARING, (SLIPPER TYPE)
RETAINER
LINER, 1.05" PORT #1
LINER, 1.05" PORT #2
LINER, 1.05" PORT #3
LINER, 1.05" PORT #4
LINER, 1.05" PORT .005" O.S.
LINER, 1.05" PORT .010" O.S.
LINER, 1.05" PORT .020" O.S.
LINER, 1.05" PORT .030" O.S.
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) #2 STD GAP
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #3
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #4
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) .010 O/S
CYLINDER KIT CR/HD (18.7:1) (1.05 PORT) .020 O/S
INSERT, .1810" THRU .1815" THK. FOR STD. THRU .005
INSERT, .1780 THRU .1785" THK. FOR STD. THRU .005"
INSERT, .1795" THRU .1800" THK. FOR STD. THRU .005
INSERT, .1795" THRU .1800" THK. FOR .010, .020, .0
INSERT, .1760" THRU .1755" THK. FOR STD. THRU .005
INSERT, .1715" THRU .1720" THK. FOR STD. THRU .005
INSERT, .1755" THRU .1760" THK. FOR .010", .020",
INSERT, .1715" THRU .1720" THK. FOR .010", .020",
INSERT, .1810" THRU .1815" THK. FOR .010, .020, .0
INSERT, .1780" THRU .1785" THK. FOR .010", .020",
CAMSHAFT ASSY. (RIGHT BANK, R.H. ENG.) (STAMPED 51
CAMSHAFT ASSY. (LEFT BANK, R.H. ENG.) (STAMPED 511
END BEARING
END BEARING
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1.25"
BEARING, REAR (STD.)
BUSHING (STD.)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
BEARING SET (STD.)
BOLT, 3/8"-24X.62"
SEAL OIL LIP TYPE CAMSHF FRT
PULLEY
LOCKWASHER, 1 1/8"
KEY, 1/4"X3/4" WOODRUFF (12.9350)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (L.H. HELIX) (LEFT BANK) (REAR)
GEAR (R.H. HELIX) (RIGHT BANK)(REAR)
GEAR (RIGHT BANK) (FRONT) (66 TEETH)
SPACER, CAMSHAFT PULLEY FRONT
BOLT, 3/8"-24X1"
RETAINER
GEAR ASSY. (L.H. HELIX)
GEAR (L.H. HELIX)
BEARING
BOLT, 5/16"-24X1/2" (VIBRA-TITE COATED)
RETAINER
BOLT, 1/2"-13X2"
BOLT, 1/2"-13X2 1/2"
HUB & DOWEL ASM IDLER GEAR
DOWEL (1.7250)
WASHER, 17/32"X7/8"X3/32"
COVER ASSY. (INCL. DOWEL PINS)
COVER (4.1290)
SCREW, 5/16"-18X3/4" SE LF TAP., HEX. HD. (12.9066
ARM ASSY. (LEFT)
ARM ASSY. (RIGHT)
ARM ASSY.INJECTOR (UNBUSHED CLEVIS)
BUSHING VLV RKR ARM LRG
BUSHING INJ RKR ARM LRG
BUSHING, .0015" U.S. I.D.
BUSHING VLV RKR ARM SMALL
BUSHING, .0015" U.S.I.D.
CLEVIS
BUSHING, .44"I.D.X.56"O.D.
PIN (PUSH ROD END)
PLUG, 11/32" SPECIAL (1.8160)
SHAFT ASSY. (INCLUDES PLUG)
BRACKET
BOLT, 1/2"-13X4 1/4"
NUT, 5/16"-24 LOCK
SPRING (2 5/8" FREE LENGTH, .177" WIRE DIA.11 COIL
SEAT (VALVE)
RETAINER (SNAP RING)
CAM FOLLOWER ASSY. (INCLUDES ROLLER SET)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4" (12.9001)
GUIDE, CAM ROLLER
VALVE KIT (FOUR VALVE) (IDENTIFICATION "U")
GUIDE, EXHAUST VALVE
SEAL ASSY.
INSERT (.010" O.S.) (4 VALVE CYLINDER HEAD)
SPRING (1.97" FREE L. 8.8 COILS, R.H. HELIX, .148"
BRIDGE, EXHAUST VALVE (1.8343)
SCREW, 5/16"-24X1" (ADJUSTING)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
WASHER, 1/2"X15/16"X1/16" (1.8360)
LOCK (HALVES)
COVER, CAST 12V
KIT, 12V, ONE BANK
INJECTOR MUI N60, NC SERIES
INJECTOR MUI N80, NC SERIES
INJECTOR MUI N90, NC SERIES
INJECTOR ASSY.(7N65)
INJECTOR MUI N70, NC SERIES
INJECTOR MUI N55, NC SERIES
SERVICE KIT (WIRE MESH FILTER) (MUI)
BOLT, 3/8"-16X1/2"
CLAMP
WASHER, INJECTOR CLAMP
CAGE, INJ VALVE SPRING
SPRING
VALVE KIT
TIP ASSY. (5D45)
CAGE, INJ CHECK VALVE
VALVE, INJ CHECK
RETAINER, INJ GEAR
RACK ASM
PIN, BUSHING GUIDE
PLUNGER AND BUSHING ASSY. (5N65)
GASKET, INJ FILTER CAP
ELEMENT, INJ FILTER
PIN, STOP
SPRING, INJ PLUNGER
FOLLOWER
DEFLECTOR, SPILL
SEAL, INJ (VALVE NUT TO BODY)
VALVE NUT
DOWEL
TAG, NUMBER (BLANK)
BODY ASM
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
PUMP KIT (L.H., 3/8" INLET, HIGH CAP)
KIT, FUEL PUMP OVERHAUL 3/8 IN GEAR
KIT, FUEL PUMP OVERHAUL 1/4 IN GEAR
STRAINER ASSY. (T-80)
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BRACKET
PIPE ASSY. (LONG) (2.4020)
PIPE ASSY. (SHORT) (2.4020)
TUBE ASM FUEL CYL HEAD TO INJECTION (SHORT)
TUBE ASM FUEL CYL HEAD TO INJECTOR (LONG)
CONNECTOR
WASHER, 7/16"X3/4" (2.4030)
HOSE, BULK #8X25 FT. (12.8550)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.)(STRAIGHT)
CONNECTOR, 1/2" INV. FL. TUBE; 3/8" PIPE (12.9460)
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.) (45 DEG.)
ELBOW, 1/2"-45 DEG. INV. FL. TUBE; 3/8" PIPE
HOSE, BULK #6X25 FT. (12.8550)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.)(STRAIGHT)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.) (90 DEG.)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
TUBING, SPIRAL WRAP 15 IN
LOCKWASHER, 1/4"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X7/8"
CLIP, 3/8" BOLT (12.8554)
BOLT, 1/4"-28X.62" (12.9001)
TEE, 1/4"X1/4"X5/8" (7.4694)
BUSHING PIPE RED 3/8 PTF 1/4 ZINC
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
STRAP, NYLON (2.5255)
GOVERNOR ASSY. (VARIABLE SPEED) MECHANICAL(LCM)
SCREW, #4X3/16" RD. HD. DRIVE
PLATE
SCREW ASSY., 1/4"-20X1" (W/LW) (12.9025)
SCREW (INCL. SPRING RETAINING GROOVE)
COVER ASSY.
PIN, 1/4"X3/4" ROLL (12.9275)
COVER ASSY. (2.7045)
PIN, 5/32"X7/8" SPRING (12.9270)
SHAFT ASSY.
GASKET
PLUG, 1 1/16" EXPANSION
TUBE, CONTROL LINK COVER (2.7230)
HOUSING ASSY. (INCLUDES TUBES) (2.7235)
PIN, 3/16"X7/16" DOWEL (2.7230)
SHAFT ASSY.
SHAFT
WASHER, #10
SPACER, .562"O.D.X1.770"L.
BEARING (UPPER)
BEARING (LOWER)
LEVER
SCREW, (GAP ADJUSTING)
PIN, 5/16" DIA.X29/32"L.
LEVER ASSY. (INCLUDES PIN IN 2.7315)
BEARING (2.7440)
LEVER ASSY.
PIN, .309"X3.12" L.
CLIP, GOVERNOR CONTROL SHAFT LOCK
PIN, .375"X2" L.
WASHER (2.7430)
CARRIER AND WEIGHT ASSY.
SHAFT AND CARRIER ASSY.
SHAFT
WEIGHT ASSY.
WASHER, .384"I.D.X11/16"O.D.X.033" THK. (2.7430)
RING, RETAINER .347"I.D.X.048"X.048" THK. (2.7430)
PIN (RING GROOVE)
RISER
BEARING, .551" W.
SCREW 5/16"-24X3/8"L.
LOCKWASHER, 21/64"
WASHER, 21/64" (2.7310)
BEARING
LOCKWASHER, 5/16"
BOLT, 5/16"-18X3 1/2"
BOLT ASSY., 1/4"-20X3/4" (W/LW) (12.9001)
PLUG, .696" EXPANSION (12.9330)
LEVER BRG & RLR ASM VAR SPD SPR (OBSOLETE)
SHAFT
SEAL RING, .477"I.D.X.113" THK. (YELLOW PAINT)
KEY, 3/32"X1/2" WOODRUFF (12.9350)
SCREW, 5/16"-24X1/4" SET
SCREW, 1/4"-20X1 1/2" (IDLE SPEED ADJUSTING SCREW)
NUT, 1/4"-20 LOCK (12.9120)
GASKET
SPRING (TWO RED STRIPES)
PLUNGER, 1.54"L.
GUIDE
RETAINER
STOP (WITH STEP)
SCREW ASSY. (WITH SPRING)
SPRING (2.7810)
NUT, 3/8"-24 LOCK (12.9140)
NUT, 1/4"-28 JAM
TUBE ASSY. (LEFT BANK) (12V-71)
TUBE ASSY. (RIGHT BANK) (12V-71)
LW 1/4" CAD
BOLT, 1/4"-20X5/8"
BRACKET
PIN, 1/8"X7/8" GROOVE (12.9270)
SHAFT (1.88" L.)
SHAFT (1.06" L.)
PIN, 1/8"X3/4" GROOVE (12.9270)
LEVER
SPACER
SPRING (L.H. HELIX) (GREEN)
SPRING (R.H. HELIX) (ORANGE)
SPRING, RETURN (GREEN)
NUT, 1/4"-28 JAM
SCREW, 1/4"-28X.90"
LEVER
PIN, 1/16"X1/2" COTTER
LINK (SHORT) (LEFT BANK)
LINK (LONG) (RIGHT BANK)
LOCKWASHER, 3/8"
BOLT, 3/8"-16X1 1/4"
SPACER (2.3530)
BRACKET
SPRING, 3,4,6,8V53
SPRING (8.59" L.)
ROD END EYE, 3/8"-16X4.23" L.
EYE (1/4"X5 3/4" L.)
BOLT, 5/16"-24X5/8" (2.9345)
NUT, 7/16" (SPRING HANGER)
NUT, 5/8" (SPRING HANGER)
BRACKET (2.9405)
SPRING (2.9405)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8" (12.9001)
LEVER
HOUSING ASSY. (REAR) (12V)
HOUSING ASSY. (FRONT) (12V)
WASHER, 1/4" (COPPER) (2.7175)
BOLT, 1/4"-20X9/16"
LOCKWASHER, 3/8"
WASHER, 3/8"
BOLT, 3/8"-16X3"
BOLT, 3/8"-16X1.135" (12.9001)
BOLT, 3/8"-16X1 1/8"
HOUSING
PLUG, 3/8" CUP (12.9320)
GASKET (3.3030)
PLATE
PIN, 1/8"X11/16" ROLL (12.9275)
VALVE ASSY. (INCLUDES 5128841 VALVE)
SPRING, HINGE (3.3070)
VALVE
HINGE, VALVE
PIN, SPRING (3.3070)
SHAFT (14"L.)
WASHER, 7/16" (3.4001)
RING, SEAL (2.4225)
SPRING (VALVE)
SPRING (LATCH)
LW 1/4" CAD
PW, 1/4" STL ZINC
BOLT, 1/4"-20X1 1/2"
LATCH
SPACER, 17/64"X7/8"
PLATE, WARNING
BUSHING, ECCENTRIC
LOCKWASHER, 5/16"
PIN, 1/8"X1 1/2" COTTER
BOLT, 5/16"-18 X 1 1/4"
PIN, 1/8"X1" ROLL (12.9275)
COUPLING
LEVER
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8"
HOUSING
ROTOR ASSY. (RH HELIX)
ROTOR ASSY. (LH HELIX)
PLUG, 15/16" CUP (2.7340)
PIN, 1/4"X1 3/4" GROOVE (12.9270)
SHAFT, 4.22" L. (REAR)
SHAFT ASSY.(INCLUDES PLUG)
PLUG, 7/8" CUP (4.8001)
BOLT, 1/4"-20X3/4" (12.9001)
BEARING, BALL DBL. ROW (REAR)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4"
RETAINER
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
GEAR SET
SCREW, 5/16"-18X1 1/2" FIL. HD. SL.
STRAINER, OIL
SLEEVE
PIN, .308"X2" DOWEL
PIN, 5/16"X7/8" DOWEL (12.9290)
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
SEAL KIT
BLOWER KIT (12V) (TURBO AND NON-TURBO)
BLOWER KIT (SMALL BEARING)
SPROCKET
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
SPROCKET
PLUG, 1/4" PIPE
BOLT, 3/8"-24 X 1" (3.4105)
CHAIN, 1/4" W., 10.28" L. ENDLESS
BOLT, 1/2"-20X1 1/4"
LOCKWASHER, 1/2" EXT. TOOTH (3.4080)
SPACER
HUB (48 TEETH) (3.4130)
PLATE, SPRING (3.4135)
BOLT, 3/8-24 X .925 LG SHDR LOCK
SPACER, .385" I.D.X1" O.D.X.013" THK. (3.4137)
LOCKWASHER, 5/16"
COVER
SEAL RING, 1/4" TUBE (12.9435)
COVER KIT
SEAL, 4.32"X4.88"X.77"
TUBE ASSY.,OIL (BLOWER DRIVE SUPPORT)
CLAMP ASSY. (T-BOLT)
GEAR ASSY. (L.H. HELIX; 38 TEETH) (3.4300)
BEARING, THRUST BLOWER DRIVE GEAR
WASHER, THRUST
BOLT, 3/8"-24X7/8"
PIN, 1/8"X1/4" SPRING (12.9270)
WASHER, 3/8"X9/16" (COPPER)
BOLT 3/8-24 X 1.1875 LG
BALL CHROME
SUPPORT ASSY. (3.4350)
BUSHING, DRIVE GEAR BLOWER OR ACSRY
GASKET, BLOWER DRIVE SUPPORT
LOCKWASHER, 5/16"
BOLT, 5/16"-24X1 5/8"
COUPLING ASSY.
SUPPORT
CAM, 1.41" THK.
RETAINER
SHAFT, .790" DIA. X 5" L. NITRIDED (12V)
RING, RETAINING
BODY ASSY. (PRESSURE)
SHAFT
SHAFT
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
COVER ASSY.
BUSHING
GASKET (2.44" B.C.)
GASKET
FLANGE
COVER (4.1290)
COVER
BOLT 3/8"-16X1.015" (12.9001)
GASKET
KEY, 3/16"X3/4" WOODRUFF
GEAR (1.2 TO 1, 79 TEETH)
GEAR (1.5 TO 1 RATIO, 86 TEETH)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
GEAR (1.5 TO 1 RATIO, 57 TEETH)
BOLT, 3/8"-16 X 1"
PIPE (12V)
GASKET (2.88" B.C.) (4.1520)
GASKET (2 21/32" B.C.)
WASHER, 3/8"
SCREEN
SPACER, 13/32"X7/8"X1" (8.3826)
BOLT, 3/8"-16X2 1/2" LOCK (12.9001)
NUT, 3/8"-24 LOCK (12.9140)
BRACKET, CLIP (4.1510)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT 3/8-24 X 1.1875 LG
COVER
BOLT, 3/8"-16X1 5/8"
JUNCTION BLOCK (PUMP TO CYLINDER BLOCK) (4.1580)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE ASSY., #4X11.12" L. (5.1003)
HOSE ASSY. (19" L.) (2.5050)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR 1/8 NPTF BRASS .025 RESTR
REGULATOR ASSY. (12V, 16V) (4.1671)
RELIEF VALVE ASSY.
LOCKWASHER, 7/16"
BOLT, 3/8"-16X1 3/8"
INSERT, FILTER ADAPTOR (4.2240)
ADAPTOR ASSY.
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
FILTER ASSY., LUB OIL SPIN
ADAPTOR
BOLT, 7/16"-14X1 1/4"
PLUG, 1/4" PIPE
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
VALVE (DISC)
SPRING
CORE ASSY. (24 PLATE)
HOUSING
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
DRAINCOCK, 1/4" (12.9510)
COVER (REAR)
WASHER, 21/64" SPECIAL COPPER (4.7120)
VALVE
SPRING (4.1260)
HOSE, BULK 2 7/8"X4 1/2" L.
CLAMP, 2 9/16"-3 1/2" CLAMPING RANGE (12.9660)
CLAMP, 2 1/16"-3" CLAMPING RANGE (12.9660)
PLUG, 3/4" PIPE SQ. SOC. SCOTCHGRIP
ELBOW
SEAL, 3.60" O.D.X.62" W.
CLAMP, 3 1/2" DIA. HOSE (T-BOLT)
ELBOW, 90 DEG. 1' FLD TUBE 3/4" NPTF
HOSE, #16X20' L. (12.8550)
FITTING, #16 HOSE (1 5/16"12 STRAIGHT SWIVEL)
ELBOW, 1"-45 DEG. ST.
CONNECTOR, 5/8" FL. TUBE, 3/4" PT. (8.3800)
CLIP, 1 1/8" TUBE, 7/16" BOLT (5.5390)
CAP, OIL FILLER
STRAINER
HOOK, CHAIN ("S" TYPE) (4.5020)
GUIDE (1.50" L.)
ADAPTOR (21.70" DEV. L.)
BOLT, 3/8"-24X3/4"
BRACKET, SUPPORT
CLIP, 1/2" TUBE, 3/8 BOLT
WASHER, 7/16"
BOLT, 3/8"-16X4 1/4" (12.9001)
BOLT, 3/8"-16X6"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X1 1/4"
BOLT, 3/8"-16X5 1/2"
PLUG, 1/2"-14 PIPE (12.9550)
BOLT, 3/8"-16X1.38" (12.9001)
PAN (STAMPED) (12V)
WASHER, 3/8"X9/16" (COPPER)
FLANGE
TUBE (DEV. L. 15.17")
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X4 3/4" (12.9001)
SHELL
ELEMENT, BREATHER
GASKET
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/2"
BOLT, 7/16"-14 X 5.25"
BOLT, 7/16"-14X5" (12.9001)
RING, SEAL (.139"X5.109" I.D.)
PLUG, 1/2"-14 PIPE (12.9550)
PUMP ASSY.
COVER
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
SHAFT (MARKED "TU" ON END)
BEARING
BEARING
LOCKRING (5.4235)
WASHER, 7/16" (12.9200)
IMPELLER (MILLED-FACE)
NUT, 7/16"-20 LOCK (5.1120)
GEAR, WATER PUMP 42 TEETH LH HELIX
KIT, RECONDITIONING (W/UNITIZED SEAL, MILLED-FACE
REPLACEMENT KIT, IMPELLER INSERT
LOCKWASHER, 3/8"
MANIFOLD (FRONT & REAR) (8V)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
GASKET, WATER OUTLET PORTS (5.2010)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
PLATE, WATER OUTLET PORTS
THERMOSTAT 170 DEGREE 12V71/16V92TA
WASHER, 3/8"
BOLT, 3/8"-16X1 1/2"
BOLT, 7/16"-14X1 1/8" (12.9001)
HOUSING (LEFT BANK)
RETAINER, VENT SEAL (IN CYL. HD.)
WASHER, 7/16"X3/4" (2.4030)
WASHER, 3/8"X9/16" (COPPER)
RING, SEAL (2.4225)
DRAINCOCK, 1/4" (12.9510)
HOUSING (RIGHT BANK)
PIN, JIGGLE
COVER (RIGHT BANK)
COVER (LEFT BANK)
BOLT, 3/8"-16X3.50"
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE, 2 3/4"X24" L. (TO HSG.) (5.3330)
MANIFOLD (HEAT EXCHANGER COOLING UNITS)
TUBE (16.64" L.)
CLAMP, 1.75"-2.62" DIA. HOSE
HOSE, 2"I.D.X2.50" L. (5.2165)
BOLT, 3/8"-16X1 1/8"
ELBOW
CLAMP HOSE 3.5 - 4.0 ID LINER
BUSHING, RED 1X3/4" (12.9570)
ELBOW, 3/4" PIPE TO 1" HOSE (W/1/4" DRAIN) (5.3430
CONNECTOR, 3/4" PIPE TO 1" HOSE (5.1235)
DRAINCOCK, 3/8" (12.9510)
ELBOW, 1" PIPE (5.3430)
HOSE, 1" I.D.X30" L. (4.1642)
HOSE, 1"I.D.X2.50"L. (5118149)
CLAMP, 1 1/2" I.D. (12.9660)
TANK ASSY.
COVER (OUTLET) (5.5020)
COVER ASSY.
COVER
GASKET
GASKET
BRACKET (UPPER)
BRACKET (LOWER)
NECK (1.69" DIA.) (WITH 2 1/16" I.D. CAP)
TUBE (DEV. L. 4 1/4") (2.2300)
ELBOW, 5/16"-90 DEG. INV. FL. TUBE (12.9480)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
MANIFOLD ASSY.
GASKET (INTERMEDIATE)
GASKET
WASHER, (DISHED) 7/16" (6.1001)
STUD, 7/16"-14/20X2 3/32" (6.1020)
LOCKWASHER, 3/8"
PLUG, 1/8" PIPE (12.9550)
BOLT, 3/8"-16X2 1/4"
FLANGE, 4"
GASKET (FLANGE)
WASHER, .53"X.94"X.12" (1.3140)
GEN CHRG AC 24V70A NG 22SI DELCO CW/CCW
PULLEY (2.76" DIA., 2 GROOVE)
PULLEY (6.29" DIA., 3/8 GROOVE)
BELT SET, .380"W.X47"L. (2 BELTS)
BRACKET
BRACKET (LOWER)
BRACKET
SWITCH (PUSH-BUTTON)
SHAFT ASSY. (60" L.)
HOSE ASSY., 1/2"I.D.X15 21/32"L. (12.4065)
CONN 1/4 FLD TUB 1/8 NPTF BRS CTD
CONNECTOR 1/8 NPTF BRASS .025 RESTR
CONNECTOR
BUSHING, 1/4"X1/8" RED. (12.9570)
LOCKWASHER, 1/2"
SUPPORT
PAD, BREATHER
RETAINER, BREATHER PAD (1" DIA.)
RETAINER, BREATHER PAD (1.36" DIA.)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BUSHING, 3/4"X3/8" RED. (12.9570)
BLOCK ASSY. (W.B.P.) (12V)
GASKET KIT (MARINE SUPPLEMENTARY)) (12V71)
GASKET KIT (ENGINE OVERHAUL)(12V71)
CLAMP, 1"-1 1/2" CLAMPING RANGE (12.9660)
OIL PUMP, 12V71 LH, NON-SCAVENGING
GASKET BREATHER
HOSE, 3.50"X4.50" L.
PUMP ASSY. (JABSCO)
SECONDARY FILTER
SHAFT ASSY. (180"L.)
TACHOMETER DRIVE SHAFT
GASKET
CORE (DOUBLE OUTLET)
ELECTRODE (2 1/8"L.)
SEAL RING
COVER (INLET
GLAND
CAP,(7# PRESSURE)
COVER (OUTLET) (5.5550)
VALVE ASSY. (24V.) (NORMALLY OPEN) Governor
BLOWER 12V71 TURBO
AFTER COOLER CHARGE AIR
RETAINER, 13/64" SPRING (12.9460)
GASKET
WASHER, 11/16"X1/8" (2.7290)
BOLT, 5/16"-18X2 1/16"
WASHER, 11/16"X1/8" (2.7290)
ELBOW
BOLT, 1/2"-13 X 1.50"
PLUG, FUSE (1/4"-18 RECESSED SOC. HD.) (OBSOLETE)
PLATE, SCUFF
DAMPER
KEY, 1/4"X1" WOODRUFF (OBSOLETE)
GASKET
BRACKET
FITTING 2PCS
HOUSING
GASKET
WASHER (PACKING RETAINER)
BEARING (ROLLER)
SILENCER-I
CONNECTOR
CHAIN 20INCH
SEAL THERMOSTAT DETROIT
GENERATOR, 24V., 65 AMP (C.W./C.C.W.)
HI-TACK GASKET SEALANT (16OZ BRUSH TOP CAN)
SEALANT, ULTRA BLUE RTV 3 OZ.
GAGE OIL CHR
GAGE, WATER TEMP 265F, 372" CAPILLARY
DRIVE
GAGE, TACH 3000RPM W/O HOUR METER BLACK
Primary filter (Racor make 2020 1000FH (water saparator)
STARTAR MOTAR HYDRAULIC (LCM)
STEERING GEAR PUMP (LCM)
CLUTCH CABLE (LCM)
THROTLE CONTROL CABLE/SHAFT (LCM)
ACCUMULATOR PUMP (LCM)
ACCUMULATOR HAND CHARGING PUMP (LCM)
SWITCH WATER TEMPREATURE WITH CAPILARY(EDG)
SWITCH ASSY LUBE OIL PRESSURE DEFFERENTIAL( EDG)
TURBO CHARGER ASSY,(AFT EDG)
50MT 24 V/STARTING MOTAR ELCT 24V(EDG)
GOVERNOR HYDRAULIC WOODWORD(EDG)
TURBO CHARGER ASSY,(FWD EDG).
COVER
GAGE ASM
GAGE, OIL PRESSURE 150 PSI MECHANICAL CHROME
STUD 3/8-16-24 X 1.625 LG CTD THD
CYLINDER HEAD ASSY.
SEAL, CRANKSHAFT FRONT OIL-LH ROTATION (FOR SUSTAI
HOUSING (SAE #1)
RING SEAL (FORMER STYLE)
RING, FIRE NO GROOVE KEYSTONE
REMANUFACTURED 05197613
HUB ASSY.
ROLLER SET
INSTALLER, EXHAUST VALVE SEAL (2 VALVE)
COVER, CAST 12V
DECAL FUEL FILTER
FILTER ELEMENT oil filter
ELBOW, 1/2"-90 DEG. INV. FL. TUBE (OBSOLETE)
ELBOW, 5/16" (.065" RESTRICTION) (2.5210)
GEAR (1.2 TO 1 RATIO, 64 TEETH)
GEAR (64 TEETH) (OBSOLETE)
DIPSTICK (X-28.00", Y-1.75", Z-25.44")(23513087)
PAN ASSY. (CAST IRON) (12V)
HOSE (2 1/2"I.D.X2 1/4"L.)
SEALANT, RTV 305 ML. (10.3 FL. OZ.)
SEAL, OIL (SGL. LIP) (.525" WIDE)
ENGINE OVER SPEED SENSOR/SWITCH(EDG) GOVERNOR ASSY. (ELECTRIC)
PYROMETER
SCANNER
Third Year
Services
DETROIT ENGINE (12V71)
Top overhaul - TOH LCM boats
Major overhaul - MOH LCM boats
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler-Keel cooler system flushing only
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions (list of inaccessible hoses)
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Overhauling of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft rear oil seal
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working
Crankshaft deflection reading
Renewal of piston assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Overhauling of accumulator pump
Overhauling of hand charging pump
Cleaning and inspection of steering gear pump
Renewal of steering gear pump
Repair/Renewal of Sea water pump
DETROIT EDG (12V71T)
Top overhaul - TOH EDG
Major overhaul - MOH EDG
Cylinder Block reconditioning
Crank shaft reconditioning
Flywheel & housing checking if required replacement
Cylinder head reconditioning (Each Cyl. Head)
Checking and reconditioning of main bearing bore
Overhauling of turbocharger (Each Turbo)
Overhauling of fresh water pump
Overhauling of lub oil pump
Overhauling of fuel pump
Chemical cleaning and pressure testing of fresh water cooler
Chemical cleaning and pressure testing of lub oil cooler
Chemical cleaning and pressure testing of return fuel oil cooler
Chemical cleaning and pressure testing of air cooler
Chemical cleaning and pressure testing of exhaust manifold
Air inlet filter cleaning
Changing of lub oil & fuel filter (01 Set)
Changing of control cables engine (Throttle, Acc. , Air Shut off, Fuel shut off) EACH
Renewal of hoses with unions each one for a particular system.
Checking and calibration of pyrometer scanner, if required replace pyrometer probe with cable
Renewal of gauges (Each Guage)
Renewal of piston rings (Each Piston)
Renewal of connecting rod (Each C/Rod)
Renewal of crankshaft bearing (Each Brg Pair)
Renewal of cylinder liner (Each Cyl. Liner)
Renewal of gasket (cylinder head, CAC, TC, Coolers) Each
Renewal of governor
Overhauling of Vane blower (Each Blower)
Renewal of connecting rod brgs (Each Pair)
Overhauling of starter
Electrical system checks of pyrometer and starting solenoid
Check/Replacement of rocker arm and push rod
Renewal of crankshaft oil seal ring
Renewal of crankshaft Rear oil seal ring
Overhauling of gear train and timing marks
Changing of solenoid shut off valve
Changing of thermostat element (Each Th.)
Calibration of pressure temp switch
Assembling the cylinder head and changing of gasket (Each Cyl. Head)
All exhaust valve replacement, setting and renewal of seal
Calibration/Changing of fuel injector (Each Inj.)
Changing of injector tube (Each Tube)
Decarbonization of cylinder head (Each Head)
Chemical cleaning and pressure testing of cylinder head (Each Head)
Fuel rack adjustment
Governor setting
Tappet setting
Check all instrumentation for working Each
Crankshaft deflection reading
Renewal of pisotn assy with piston installation kit
Gauging/Reconditioning of camshaft assy
Renewal of camshaft bearings
Renewal of camfollowers, Valve bridges, shafts, springs, washers of cylinder head assy
Renewal of vibration damper
Renewal of silencer
Spares
DETROIT ENGINE AND EDG
STUD, 3/8"-16/24X1 13/16"
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER, 1.125"O.D.X.656"I.D. (1.3140)
BOLT, 5/8"-11 X 6.62" 12 PT MAIN BRG CAP (1.3140)
PIN, 5/16"X3/8" DOWEL
BOLT, 5/8"-11 X 6.01" 6 PT MAIN BRG CAP (1.3140)
PLUG, 2" CUP (1.2001)
CAP, CRANKSHAFT MAIN BEARING (UNFINISHED) (1.3110)
PLUG, 5/16" SPL CUP
PLUG, 1 5/8" CUP (STAINLESS STEEL)
GASKET, 2.75"X.063" PLUG
PLUG, 2 1/4" CUP (STAINLESS) (1.1001)
PLUG, 1 1/4" CUP (1.1001)
PIN, 1/2"X1 5/8" DOWEL
PLUG, 1/4"X5/16" PIPE
CAP, CRANKSHAFT MAIN BEARING (FINISHED) (1.3110)
BOLT, 5/16"-18X1" FLG. HEX. HD. LK CTD (12.9001)
PLUG, 3/4" PIPE (12.9550)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/2" PIPE (12.9550)
DRAINCOCK, 1/4" (12.9510)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
STUD 3/8-16-24 X 1.62 LG CTD THD
BOLT, 7/16"-14X1 1/8" LOCK
PLUG, 2 1/8" CUP
PLUG, 15/16" CUP (2.7340)
FITTING, FEMALE SWIV. 3/8" HOSE 5/8"-18 (12.6692)
HOSE, #6X75" L. (7.4699)
FITTING, MALE .38" HOSE 5/8"-18 (2.5010)
CHECK VALVE ASSY. (1 PSI)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
ELBOW
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16 X 1.25"
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
SPACER, 13/32"X3/4"X1/2" (7.1581)
SLEEVE, PILOT
INSERT, VALVE (1.8330)
NOZZLE, WATER (DOUBLE OUTLET) (1.2005)
WASHER, 1/2"X15/16"X1/16" (1.8360)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
PLUG, 1/4" PIPE
WASHER, 7/16"X3/4" (2.4030)
PLUG, PIPE 1/4-18" NPTF
GUIDE, EXHAUST VALVE
PLUG, 3/4" PIPE (12.9550)
PLUG, 3/4" DIA. CUP (1.1001)
NOZZLE, WATER (SINGLE OUTLET) (1.2005)
PLUG, FUSE 1/8" PIPE SLOTTED HD. (EARLY UNITS)
TUBE KIT, INJECTOR HOLE (INCLUDES 5104701 SEAL RIN
STUD, 7/16"-14/20X2 3/32" (6.1020)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/8"-11 X 5 3/8"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X5/8"
BOLT, 1/4"-20X1/2" (W/SEAL PATCH) (12.9001)
COVER (1/4" TAPPED HOLE) (7.4597)
COVER, GOV HOLE
WASHER, 1/4" (COPPER) (2.7175)
LOCKWASHER, 5/8"
BOLT, 5/8"-11X1 3/4"
BRACKET (ITEM 3)
BOLT, 5/8"-11X4" (12.9001)
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/8" (12.9001)
BRACKET (L. AND R. BANK)
DOWEL, 9/16"X1 5/8"
PLUG, 1/8"-27 PIPE SQ. SOC. (12.9550)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
CRANKSHAFT
SLINGER (1.3050)
BOLT, 1"-14X2 3/4" (1 1/2" HEX. HD.)
WASHER, 1 1/16"X1 3/4" (USE WITH 1 1/2" HEX.HD.BOL
CAP (USED WITH 1 1/2" HEX. HEAD BOLT)
SHELL SET (STD.) (NON-SLOTTED UPPER)
SHELL SET (.002" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.010" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.020" U.S.) (NON-SLOTTED UPPER)
SHELL SET (.030" U.S.) (NON-SLOTTED UPPER)
SHELL SET (STD.) (SLOTTED UPPER)
SHELL SET (.002" U.S.) (SLOTTED UPPER)
SHELL SET (.010" U.S.) (SLOTTED UPPER)
SHELL SET (.020" U.S.) (SLOTTED UPPER)
SHELL SET (.030" U.S.) (SLOTTED UPPER)
PIN, 3/16"X1/2" DOWEL (12.9290)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
STABILIZER (ITEM B)
STABILIZER (ITEM C)
STABILIZER (ITEM E)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (R.H. HELIX, R.H. ENGINE ROTATION) (ETCHED 89
LOCKWASHER, 1/2"
BOLT, 3/8"-16X1 5/8"
BOLT, 1/2"-13X2 3/4"
COVER (PLAIN) (ITEM 5)
SEAL OIL CR/SHF. FRONT RH. ROT. (RED)
SEAL, CRANKSHAFT FRONT OIL-RH ROTATION (FOR SUSTAI
GASKET
BOLT, 7/16"-20X1" (12.9001)
DOWEL, 7/16"X1"L.
HUB ASSY.
CONE (.531"L.)
CONE, VIBRATION DAMPER REAR
KEY, 3/8"X1" WOODRUFF (1.3280)
PULLEY (7.50" DIA., 3 GROOVES) (ITEM 10)
DECAL, BOLT TORQUE 450 FT. LBS.- YELLOW
RETAINER, 1 1/32"I.D.X2 3/8"O.D.X1/2" THK.
BOLT, 9/16"-18X2.75"
PLATE, SCUFF 12 BOLT 2.88 ID (1.4001)
FLYWHEEL ASSY. (SAE #1) (NC)
LOCKWASHER, 3/8"
BOLT, 1/2"-13X3 1/4" (12.9001)
SHIM, IDLER BOSS (.0095"-.0105" THK.)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
WASHER, .53 X 1.00 (1.5001)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT, 3/8"-16X1.135" (12.9001)
BOLT 3/8"-16 X 1.25 LG HEX
BOLT 3/8"-24 X 3.750",HEXFLGHD
SEAL, OIL (RR CR/SHFT STD RH ROT ENGINE SINGLE DUST LIP; .58" WIDE)
SEAL, CR/SHF O.S. RH SINGLE DUST LIP .58" WIDE ( USE W/23507225 SLEEVE)
BOLT, 7/16"-20X3.52"
ROD ASM, CONNECTING (CR/HD, Y-DRILL)
SHELL SET (STANDARD)
SHELL SET (.002" U.S.)
SHELL SET (.010" U.S.)
SHELL SET (.020" U.S.)
SHELL SET (.030" U.S.)
RING SEAL, SKIRT TO DOME
SKIRT CR/HD PISTON
PISTON KIT DOME CR/HD (18.7:1)
PISTON KIT CR/HD (18:1)
RING SET, PISTON STD GAP
RING (UPPER & LOWER COMPRESSION)
PIN ASSY. (NON-TURBO)
SPACER
BOLT, 7/16"-20X2.00" L. (12 POINT)
BEARING, (SLIPPER TYPE)
RETAINER
LINER, 1.05" PORT #1
LINER, 1.05" PORT #2
LINER, 1.05" PORT #3
LINER, 1.05" PORT #4
LINER, 1.05" PORT .005" O.S.
LINER, 1.05" PORT .010" O.S.
LINER, 1.05" PORT .020" O.S.
LINER, 1.05" PORT .030" O.S.
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) #2 STD GAP
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #3
CYLINDER KIT CR/HD (18.7:1) 1.05 PORT #4
CYLINDER KIT CR/HD(18.7:1)(1.05 PORT) .010 O/S
CYLINDER KIT CR/HD (18.7:1) (1.05 PORT) .020 O/S
INSERT, .1810" THRU .1815" THK. FOR STD. THRU .005
INSERT, .1780 THRU .1785" THK. FOR STD. THRU .005"
INSERT, .1795" THRU .1800" THK. FOR STD. THRU .005
INSERT, .1795" THRU .1800" THK. FOR .010, .020, .0
INSERT, .1760" THRU .1755" THK. FOR STD. THRU .005
INSERT, .1715" THRU .1720" THK. FOR STD. THRU .005
INSERT, .1755" THRU .1760" THK. FOR .010", .020",
INSERT, .1715" THRU .1720" THK. FOR .010", .020",
INSERT, .1810" THRU .1815" THK. FOR .010, .020, .0
INSERT, .1780" THRU .1785" THK. FOR .010", .020",
CAMSHAFT ASSY. (RIGHT BANK, R.H. ENG.) (STAMPED 51
CAMSHAFT ASSY. (LEFT BANK, R.H. ENG.) (STAMPED 511
END BEARING
END BEARING
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1.25"
BEARING, REAR (STD.)
BUSHING (STD.)
WASHER (STD.)
WASHER (.005" O.S.)
WASHER (.010" O.S.)
BEARING SET (STD.)
BOLT, 3/8"-24X.62"
SEAL OIL LIP TYPE CAMSHF FRT
PULLEY
LOCKWASHER, 1 1/8"
KEY, 1/4"X3/4" WOODRUFF (12.9350)
BOLT, 3/8"-24 X 1.125" (12.9001)
GEAR (L.H. HELIX) (LEFT BANK) (REAR)
GEAR (R.H. HELIX) (RIGHT BANK)(REAR)
GEAR (RIGHT BANK) (FRONT) (66 TEETH)
SPACER, CAMSHAFT PULLEY FRONT
BOLT, 3/8"-24X1"
RETAINER
GEAR ASSY. (L.H. HELIX)
GEAR (L.H. HELIX)
BEARING
BOLT, 5/16"-24X1/2" (VIBRA-TITE COATED)
RETAINER
BOLT, 1/2"-13X2"
BOLT, 1/2"-13X2 1/2"
HUB & DOWEL ASM IDLER GEAR
DOWEL (1.7250)
WASHER, 17/32"X7/8"X3/32"
COVER ASSY. (INCL. DOWEL PINS)
COVER (4.1290)
SCREW, 5/16"-18X3/4" SE LF TAP., HEX. HD. (12.9066
ARM ASSY. (LEFT)
ARM ASSY. (RIGHT)
ARM ASSY.INJECTOR (UNBUSHED CLEVIS)
BUSHING VLV RKR ARM LRG
BUSHING INJ RKR ARM LRG
BUSHING, .0015" U.S. I.D.
BUSHING VLV RKR ARM SMALL
BUSHING, .0015" U.S.I.D.
CLEVIS
BUSHING, .44"I.D.X.56"O.D.
PIN (PUSH ROD END)
PLUG, 11/32" SPECIAL (1.8160)
SHAFT ASSY. (INCLUDES PLUG)
BRACKET
BOLT, 1/2"-13X4 1/4"
NUT, 5/16"-24 LOCK
SPRING (2 5/8" FREE LENGTH, .177" WIRE DIA.11 COIL
SEAT (VALVE)
RETAINER (SNAP RING)
CAM FOLLOWER ASSY. (INCLUDES ROLLER SET)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4" (12.9001)
GUIDE, CAM ROLLER
VALVE KIT (FOUR VALVE) (IDENTIFICATION "U")
GUIDE, EXHAUST VALVE
SEAL ASSY.
INSERT (.010" O.S.) (4 VALVE CYLINDER HEAD)
SPRING (1.97" FREE L. 8.8 COILS, R.H. HELIX, .148"
BRIDGE, EXHAUST VALVE (1.8343)
SCREW, 5/16"-24X1" (ADJUSTING)
GUIDE, EXHAUST VALVE BRIDGE (1.8345)
WASHER, 1/2"X15/16"X1/16" (1.8360)
LOCK (HALVES)
COVER, CAST 12V
KIT, 12V, ONE BANK
INJECTOR MUI N60, NC SERIES
INJECTOR MUI N80, NC SERIES
INJECTOR MUI N90, NC SERIES
INJECTOR ASSY.(7N65)
INJECTOR MUI N70, NC SERIES
INJECTOR MUI N55, NC SERIES
SERVICE KIT (WIRE MESH FILTER) (MUI)
BOLT, 3/8"-16X1/2"
CLAMP
WASHER, INJECTOR CLAMP
CAGE, INJ VALVE SPRING
SPRING
VALVE KIT
TIP ASSY. (5D45)
CAGE, INJ CHECK VALVE
VALVE, INJ CHECK
RETAINER, INJ GEAR
RACK ASM
PIN, BUSHING GUIDE
PLUNGER AND BUSHING ASSY. (5N65)
GASKET, INJ FILTER CAP
ELEMENT, INJ FILTER
PIN, STOP
SPRING, INJ PLUNGER
FOLLOWER
DEFLECTOR, SPILL
SEAL, INJ (VALVE NUT TO BODY)
VALVE NUT
DOWEL
TAG, NUMBER (BLANK)
BODY ASM
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
PUMP KIT (L.H., 3/8" INLET, HIGH CAP)
KIT, FUEL PUMP OVERHAUL 3/8 IN GEAR
KIT, FUEL PUMP OVERHAUL 1/4 IN GEAR
STRAINER ASSY. (T-80)
LOCKWASHER, 3/8"
BOLT, 3/8"-16 X 1"
BRACKET
PIPE ASSY. (LONG) (2.4020)
PIPE ASSY. (SHORT) (2.4020)
TUBE ASM FUEL CYL HEAD TO INJECTION (SHORT)
TUBE ASM FUEL CYL HEAD TO INJECTOR (LONG)
CONNECTOR
WASHER, 7/16"X3/4" (2.4030)
HOSE, BULK #8X25 FT. (12.8550)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.)(STRAIGHT)
CONNECTOR, 1/2" INV. FL. TUBE; 3/8" PIPE (12.9460)
CLIP .688" DIA 3/8" BOLT CTD (12.8554)
FITTING, #8 HOSE (3/4"-18 MALE INV. FL.) (45 DEG.)
ELBOW, 1/2"-45 DEG. INV. FL. TUBE; 3/8" PIPE
HOSE, BULK #6X25 FT. (12.8550)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.)(STRAIGHT)
FITTING, #6 HOSE (5/8"-18 MALE INV. FL.) (90 DEG.)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
TUBING, SPIRAL WRAP 15 IN
LOCKWASHER, 1/4"
PW, 1/4" STL ZINC
BOLT, 1/4"-20X7/8"
CLIP, 3/8" BOLT (12.8554)
BOLT, 1/4"-28X.62" (12.9001)
TEE, 1/4"X1/4"X5/8" (7.4694)
BUSHING PIPE RED 3/8 PTF 1/4 ZINC
CONNECTOR, 3/8" INV. FL. TUBE (12.9460)
STRAP, NYLON (2.5255)
GOVERNOR ASSY. (VARIABLE SPEED) MECHANICAL(LCM)
SCREW, #4X3/16" RD. HD. DRIVE
PLATE
SCREW ASSY., 1/4"-20X1" (W/LW) (12.9025)
SCREW (INCL. SPRING RETAINING GROOVE)
COVER ASSY.
PIN, 1/4"X3/4" ROLL (12.9275)
COVER ASSY. (2.7045)
PIN, 5/32"X7/8" SPRING (12.9270)
SHAFT ASSY.
GASKET
PLUG, 1 1/16" EXPANSION
TUBE, CONTROL LINK COVER (2.7230)
HOUSING ASSY. (INCLUDES TUBES) (2.7235)
PIN, 3/16"X7/16" DOWEL (2.7230)
SHAFT ASSY.
SHAFT
WASHER, #10
SPACER, .562"O.D.X1.770"L.
BEARING (UPPER)
BEARING (LOWER)
LEVER
SCREW, (GAP ADJUSTING)
PIN, 5/16" DIA.X29/32"L.
LEVER ASSY. (INCLUDES PIN IN 2.7315)
BEARING (2.7440)
LEVER ASSY.
PIN, .309"X3.12" L.
CLIP, GOVERNOR CONTROL SHAFT LOCK
PIN, .375"X2" L.
WASHER (2.7430)
CARRIER AND WEIGHT ASSY.
SHAFT AND CARRIER ASSY.
SHAFT
WEIGHT ASSY.
WASHER, .384"I.D.X11/16"O.D.X.033" THK. (2.7430)
RING, RETAINER .347"I.D.X.048"X.048" THK. (2.7430)
PIN (RING GROOVE)
RISER
BEARING, .551" W.
SCREW 5/16"-24X3/8"L.
LOCKWASHER, 21/64"
WASHER, 21/64" (2.7310)
BEARING
LOCKWASHER, 5/16"
BOLT, 5/16"-18X3 1/2"
BOLT ASSY., 1/4"-20X3/4" (W/LW) (12.9001)
PLUG, .696" EXPANSION (12.9330)
LEVER BRG & RLR ASM VAR SPD SPR (OBSOLETE)
SHAFT
SEAL RING, .477"I.D.X.113" THK. (YELLOW PAINT)
KEY, 3/32"X1/2" WOODRUFF (12.9350)
SCREW, 5/16"-24X1/4" SET
SCREW, 1/4"-20X1 1/2" (IDLE SPEED ADJUSTING SCREW)
NUT, 1/4"-20 LOCK (12.9120)
GASKET
SPRING (TWO RED STRIPES)
PLUNGER, 1.54"L.
GUIDE
RETAINER
STOP (WITH STEP)
SCREW ASSY. (WITH SPRING)
SPRING (2.7810)
NUT, 3/8"-24 LOCK (12.9140)
NUT, 1/4"-28 JAM
TUBE ASSY. (LEFT BANK) (12V-71)
TUBE ASSY. (RIGHT BANK) (12V-71)
LW 1/4" CAD
BOLT, 1/4"-20X5/8"
BRACKET
PIN, 1/8"X7/8" GROOVE (12.9270)
SHAFT (1.88" L.)
SHAFT (1.06" L.)
PIN, 1/8"X3/4" GROOVE (12.9270)
LEVER
SPACER
SPRING (L.H. HELIX) (GREEN)
SPRING (R.H. HELIX) (ORANGE)
SPRING, RETURN (GREEN)
NUT, 1/4"-28 JAM
SCREW, 1/4"-28X.90"
LEVER
PIN, 1/16"X1/2" COTTER
LINK (SHORT) (LEFT BANK)
LINK (LONG) (RIGHT BANK)
LOCKWASHER, 3/8"
BOLT, 3/8"-16X1 1/4"
SPACER (2.3530)
BRACKET
SPRING, 3,4,6,8V53
SPRING (8.59" L.)
ROD END EYE, 3/8"-16X4.23" L.
EYE (1/4"X5 3/4" L.)
BOLT, 5/16"-24X5/8" (2.9345)
NUT, 7/16" (SPRING HANGER)
NUT, 5/8" (SPRING HANGER)
BRACKET (2.9405)
SPRING (2.9405)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8" (12.9001)
LEVER
HOUSING ASSY. (REAR) (12V)
HOUSING ASSY. (FRONT) (12V)
WASHER, 1/4" (COPPER) (2.7175)
BOLT, 1/4"-20X9/16"
LOCKWASHER, 3/8"
WASHER, 3/8"
BOLT, 3/8"-16X3"
BOLT, 3/8"-16X1.135" (12.9001)
BOLT, 3/8"-16X1 1/8"
HOUSING
PLUG, 3/8" CUP (12.9320)
GASKET (3.3030)
PLATE
PIN, 1/8"X11/16" ROLL (12.9275)
VALVE ASSY. (INCLUDES 5128841 VALVE)
SPRING, HINGE (3.3070)
VALVE
HINGE, VALVE
PIN, SPRING (3.3070)
SHAFT (14"L.)
WASHER, 7/16" (3.4001)
RING, SEAL (2.4225)
SPRING (VALVE)
SPRING (LATCH)
LW 1/4" CAD
PW, 1/4" STL ZINC
BOLT, 1/4"-20X1 1/2"
LATCH
SPACER, 17/64"X7/8"
PLATE, WARNING
BUSHING, ECCENTRIC
LOCKWASHER, 5/16"
PIN, 1/8"X1 1/2" COTTER
BOLT, 5/16"-18 X 1 1/4"
PIN, 1/8"X1" ROLL (12.9275)
COUPLING
LEVER
LOCKWASHER, 1/4"
BOLT, 1/4"-20X7/8"
HOUSING
ROTOR ASSY. (RH HELIX)
ROTOR ASSY. (LH HELIX)
PLUG, 15/16" CUP (2.7340)
PIN, 1/4"X1 3/4" GROOVE (12.9270)
SHAFT, 4.22" L. (REAR)
SHAFT ASSY.(INCLUDES PLUG)
PLUG, 7/8" CUP (4.8001)
BOLT, 1/4"-20X3/4" (12.9001)
BEARING, BALL DBL. ROW (REAR)
LOCKWASHER, 1/4"
BOLT, 1/4"-20X3/4"
RETAINER
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
GEAR SET
SCREW, 5/16"-18X1 1/2" FIL. HD. SL.
STRAINER, OIL
SLEEVE
PIN, .308"X2" DOWEL
PIN, 5/16"X7/8" DOWEL (12.9290)
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
SEAL KIT
BLOWER KIT (12V) (TURBO AND NON-TURBO)
BLOWER KIT (SMALL BEARING)
SPROCKET
BOLT, 1/2"-20X1.10" 12 PT.WA. HD.
SPROCKET
PLUG, 1/4" PIPE
BOLT, 3/8"-24 X 1" (3.4105)
CHAIN, 1/4" W., 10.28" L. ENDLESS
BOLT, 1/2"-20X1 1/4"
LOCKWASHER, 1/2" EXT. TOOTH (3.4080)
SPACER
HUB (48 TEETH) (3.4130)
PLATE, SPRING (3.4135)
BOLT, 3/8-24 X .925 LG SHDR LOCK
SPACER, .385" I.D.X1" O.D.X.013" THK. (3.4137)
LOCKWASHER, 5/16"
COVER
SEAL RING, 1/4" TUBE (12.9435)
COVER KIT
SEAL, 4.32"X4.88"X.77"
TUBE ASSY.,OIL (BLOWER DRIVE SUPPORT)
CLAMP ASSY. (T-BOLT)
GEAR ASSY. (L.H. HELIX; 38 TEETH) (3.4300)
BEARING, THRUST BLOWER DRIVE GEAR
WASHER, THRUST
BOLT, 3/8"-24X7/8"
PIN, 1/8"X1/4" SPRING (12.9270)
WASHER, 3/8"X9/16" (COPPER)
BOLT 3/8-24 X 1.1875 LG
BALL CHROME
SUPPORT ASSY. (3.4350)
BUSHING, DRIVE GEAR BLOWER OR ACSRY
GASKET, BLOWER DRIVE SUPPORT
LOCKWASHER, 5/16"
BOLT, 5/16"-24X1 5/8"
COUPLING ASSY.
SUPPORT
CAM, 1.41" THK.
RETAINER
SHAFT, .790" DIA. X 5" L. NITRIDED (12V)
RING, RETAINING
BODY ASSY. (PRESSURE)
SHAFT
SHAFT
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
COVER ASSY.
BUSHING
GASKET (2.44" B.C.)
GASKET
FLANGE
COVER (4.1290)
COVER
BOLT 3/8"-16X1.015" (12.9001)
GASKET
KEY, 3/16"X3/4" WOODRUFF
GEAR (1.2 TO 1, 79 TEETH)
GEAR (1.5 TO 1 RATIO, 86 TEETH)
KEY, 3/16"X7/8" WOODRUFF (12.9350)
GEAR (1.5 TO 1 RATIO, 57 TEETH)
BOLT, 3/8"-16 X 1"
PIPE (12V)
GASKET (2.88" B.C.) (4.1520)
GASKET (2 21/32" B.C.)
WASHER, 3/8"
SCREEN
SPACER, 13/32"X7/8"X1" (8.3826)
BOLT, 3/8"-16X2 1/2" LOCK (12.9001)
NUT, 3/8"-24 LOCK (12.9140)
BRACKET, CLIP (4.1510)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
BOLT 3/8-24 X 1.1875 LG
COVER
BOLT, 3/8"-16X1 5/8"
JUNCTION BLOCK (PUMP TO CYLINDER BLOCK) (4.1580)
PLUG, PIPE 1/4-18" NPTF
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE ASSY., #4X11.12" L. (5.1003)
HOSE ASSY. (19" L.) (2.5050)
ELBOW, 90 DEG. 3/8" INV. FL. TUBE 1/4 NPTF BRS
CONNECTOR 1/8 NPTF BRASS .025 RESTR
REGULATOR ASSY. (12V, 16V) (4.1671)
RELIEF VALVE ASSY.
LOCKWASHER, 7/16"
BOLT, 3/8"-16X1 3/8"
INSERT, FILTER ADAPTOR (4.2240)
ADAPTOR ASSY.
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
FILTER ASSY., LUB OIL SPIN
ADAPTOR
BOLT, 7/16"-14X1 1/4"
PLUG, 1/4" PIPE
PLUG, 3/8"-18 SQ. SOC. VIBRA SEAL (12.9550)
VALVE (DISC)
SPRING
CORE ASSY. (24 PLATE)
HOUSING
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
DRAINCOCK, 1/4" (12.9510)
COVER (REAR)
WASHER, 21/64" SPECIAL COPPER (4.7120)
VALVE
SPRING (4.1260)
HOSE, BULK 2 7/8"X4 1/2" L.
CLAMP, 2 9/16"-3 1/2" CLAMPING RANGE (12.9660)
CLAMP, 2 1/16"-3" CLAMPING RANGE (12.9660)
PLUG, 3/4" PIPE SQ. SOC. SCOTCHGRIP
ELBOW
SEAL, 3.60" O.D.X.62" W.
CLAMP, 3 1/2" DIA. HOSE (T-BOLT)
ELBOW, 90 DEG. 1' FLD TUBE 3/4" NPTF
HOSE, #16X20' L. (12.8550)
FITTING, #16 HOSE (1 5/16"12 STRAIGHT SWIVEL)
ELBOW, 1"-45 DEG. ST.
CONNECTOR, 5/8" FL. TUBE, 3/4" PT. (8.3800)
CLIP, 1 1/8" TUBE, 7/16" BOLT (5.5390)
CAP, OIL FILLER
STRAINER
HOOK, CHAIN ("S" TYPE) (4.5020)
GUIDE (1.50" L.)
ADAPTOR (21.70" DEV. L.)
BOLT, 3/8"-24X3/4"
BRACKET, SUPPORT
CLIP, 1/2" TUBE, 3/8 BOLT
WASHER, 7/16"
BOLT, 3/8"-16X4 1/4" (12.9001)
BOLT, 3/8"-16X6"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X1 1/4"
BOLT, 3/8"-16X5 1/2"
PLUG, 1/2"-14 PIPE (12.9550)
BOLT, 3/8"-16X1.38" (12.9001)
PAN (STAMPED) (12V)
WASHER, 3/8"X9/16" (COPPER)
FLANGE
TUBE (DEV. L. 15.17")
LOCKWASHER, 3/8"
BOLT, 3/8"-16X2 1/4"
BOLT, 3/8"-16X1 1/8"
BOLT, 3/8"-16X4 3/4" (12.9001)
SHELL
ELEMENT, BREATHER
GASKET
LOCKWASHER, 7/16"
WASHER, 7/16"
BOLT, 7/16"-14X1 1/2"
BOLT, 7/16"-14 X 5.25"
BOLT, 7/16"-14X5" (12.9001)
RING, SEAL (.139"X5.109" I.D.)
PLUG, 1/2"-14 PIPE (12.9550)
PUMP ASSY.
COVER
BOLT, 5/16"-18X3/4" (W/SEAL) (12.9001).
SHAFT (MARKED "TU" ON END)
BEARING
BEARING
LOCKRING (5.4235)
WASHER, 7/16" (12.9200)
IMPELLER (MILLED-FACE)
NUT, 7/16"-20 LOCK (5.1120)
GEAR, WATER PUMP 42 TEETH LH HELIX
KIT, RECONDITIONING (W/UNITIZED SEAL, MILLED-FACE
REPLACEMENT KIT, IMPELLER INSERT
LOCKWASHER, 3/8"
MANIFOLD (FRONT & REAR) (8V)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
GASKET, WATER OUTLET PORTS (5.2010)
BOLT, 3/8"-16X.88" (W/SEAL PATCH) (12.9001)
PLATE, WATER OUTLET PORTS
THERMOSTAT 170 DEGREE 12V71/16V92TA
WASHER, 3/8"
BOLT, 3/8"-16X1 1/2"
BOLT, 7/16"-14X1 1/8" (12.9001)
HOUSING (LEFT BANK)
RETAINER, VENT SEAL (IN CYL. HD.)
WASHER, 7/16"X3/4" (2.4030)
WASHER, 3/8"X9/16" (COPPER)
RING, SEAL (2.4225)
DRAINCOCK, 1/4" (12.9510)
HOUSING (RIGHT BANK)
PIN, JIGGLE
COVER (RIGHT BANK)
COVER (LEFT BANK)
BOLT, 3/8"-16X3.50"
PLUG, 1/8"-27 PIPE W/SEAL (12.9550)
HOSE, 2 3/4"X24" L. (TO HSG.) (5.3330)
MANIFOLD (HEAT EXCHANGER COOLING UNITS)
TUBE (16.64" L.)
CLAMP, 1.75"-2.62" DIA. HOSE
HOSE, 2"I.D.X2.50" L. (5.2165)
BOLT, 3/8"-16X1 1/8"
ELBOW
CLAMP HOSE 3.5 - 4.0 ID LINER
BUSHING, RED 1X3/4" (12.9570)
ELBOW, 3/4" PIPE TO 1" HOSE (W/1/4" DRAIN) (5.3430
CONNECTOR, 3/4" PIPE TO 1" HOSE (5.1235)
DRAINCOCK, 3/8" (12.9510)
ELBOW, 1" PIPE (5.3430)
HOSE, 1" I.D.X30" L. (4.1642)
HOSE, 1"I.D.X2.50"L. (5118149)
CLAMP, 1 1/2" I.D. (12.9660)
TANK ASSY.
COVER (OUTLET) (5.5020)
COVER ASSY.
COVER
GASKET
GASKET
BRACKET (UPPER)
BRACKET (LOWER)
NECK (1.69" DIA.) (WITH 2 1/16" I.D. CAP)
TUBE (DEV. L. 4 1/4") (2.2300)
ELBOW, 5/16"-90 DEG. INV. FL. TUBE (12.9480)
PLUG, 1" PIPE SQ. SOC. SCOTCHGRIP
MANIFOLD ASSY.
GASKET (INTERMEDIATE)
GASKET
WASHER, (DISHED) 7/16" (6.1001)
STUD, 7/16"-14/20X2 3/32" (6.1020)
LOCKWASHER, 3/8"
PLUG, 1/8" PIPE (12.9550)
BOLT, 3/8"-16X2 1/4"
FLANGE, 4"
GASKET (FLANGE)
WASHER, .53"X.94"X.12" (1.3140)
GEN CHRG AC 24V70A NG 22SI DELCO CW/CCW
PULLEY (2.76" DIA., 2 GROOVE)
PULLEY (6.29" DIA., 3/8 GROOVE)
BELT SET, .380"W.X47"L. (2 BELTS)
BRACKET
BRACKET (LOWER)
BRACKET
SWITCH (PUSH-BUTTON)
SHAFT ASSY. (60" L.)
HOSE ASSY., 1/2"I.D.X15 21/32"L. (12.4065)
CONN 1/4 FLD TUB 1/8 NPTF BRS CTD
CONNECTOR 1/8 NPTF BRASS .025 RESTR
CONNECTOR
BUSHING, 1/4"X1/8" RED. (12.9570)
LOCKWASHER, 1/2"
SUPPORT
PAD, BREATHER
RETAINER, BREATHER PAD (1" DIA.)
RETAINER, BREATHER PAD (1.36" DIA.)
PLUG, 3/4" PIPE SQ. SOC. (12.9550)
BUSHING, 3/4"X3/8" RED. (12.9570)
BLOCK ASSY. (W.B.P.) (12V)
GASKET KIT (MARINE SUPPLEMENTARY)) (12V71)
GASKET KIT (ENGINE OVERHAUL)(12V71)
CLAMP, 1"-1 1/2" CLAMPING RANGE (12.9660)
OIL PUMP, 12V71 LH, NON-SCAVENGING
GASKET BREATHER
HOSE, 3.50"X4.50" L.
PUMP ASSY. (JABSCO)
SECONDARY FILTER
SHAFT ASSY. (180"L.)
TACHOMETER DRIVE SHAFT
GASKET
CORE (DOUBLE OUTLET)
ELECTRODE (2 1/8"L.)
SEAL RING
COVER (INLET
GLAND
CAP,(7# PRESSURE)
COVER (OUTLET) (5.5550)
VALVE ASSY. (24V.) (NORMALLY OPEN) Governor
BLOWER 12V71 TURBO
AFTER COOLER CHARGE AIR
RETAINER, 13/64" SPRING (12.9460)
GASKET
WASHER, 11/16"X1/8" (2.7290)
BOLT, 5/16"-18X2 1/16"
WASHER, 11/16"X1/8" (2.7290)
ELBOW
BOLT, 1/2"-13 X 1.50"
PLUG, FUSE (1/4"-18 RECESSED SOC. HD.) (OBSOLETE)
PLATE, SCUFF
DAMPER
KEY, 1/4"X1" WOODRUFF (OBSOLETE)
GASKET
BRACKET
FITTING 2PCS
HOUSING
GASKET
WASHER (PACKING RETAINER)
BEARING (ROLLER)
SILENCER-I
CONNECTOR
CHAIN 20INCH
SEAL THERMOSTAT DETROIT
GENERATOR, 24V., 65 AMP (C.W./C.C.W.)
HI-TACK GASKET SEALANT (16OZ BRUSH TOP CAN)
SEALANT, ULTRA BLUE RTV 3 OZ.
GAGE OIL CHR
GAGE, WATER TEMP 265F, 372" CAPILLARY
DRIVE
GAGE, TACH 3000RPM W/O HOUR METER BLACK
Primary filter (Racor make 2020 1000FH (water saparator)
STARTAR MOTAR HYDRAULIC (LCM)
STEERING GEAR PUMP (LCM)
CLUTCH CABLE (LCM)
THROTLE CONTROL CABLE/SHAFT (LCM)
ACCUMULATOR PUMP (LCM)
ACCUMULATOR HAND CHARGING PUMP (LCM)
SWITCH WATER TEMPREATURE WITH CAPILARY(EDG)
SWITCH ASSY LUBE OIL PRESSURE DEFFERENTIAL( EDG)
TURBO CHARGER ASSY,(AFT EDG)
50MT 24 V/STARTING MOTAR ELCT 24V(EDG)
GOVERNOR HYDRAULIC WOODWORD(EDG)
TURBO CHARGER ASSY,(FWD EDG).
COVER
GAGE ASM
GAGE, OIL PRESSURE 150 PSI MECHANICAL CHROME
STUD 3/8-16-24 X 1.625 LG CTD THD
CYLINDER HEAD ASSY.
SEAL, CRANKSHAFT FRONT OIL-LH ROTATION (FOR SUSTAI
HOUSING (SAE #1)
RING SEAL (FORMER STYLE)
RING, FIRE NO GROOVE KEYSTONE
REMANUFACTURED 05197613
HUB ASSY.
ROLLER SET
INSTALLER, EXHAUST VALVE SEAL (2 VALVE)
COVER, CAST 12V
DECAL FUEL FILTER
FILTER ELEMENT oil filter
ELBOW, 1/2"-90 DEG. INV. FL. TUBE (OBSOLETE)
ELBOW, 5/16" (.065" RESTRICTION) (2.5210)
GEAR (1.2 TO 1 RATIO, 64 TEETH)
GEAR (64 TEETH) (OBSOLETE)
DIPSTICK (X-28.00", Y-1.75", Z-25.44")(23513087)
PAN ASSY. (CAST IRON) (12V)
HOSE (2 1/2"I.D.X2 1/4"L.)
SEALANT, RTV 305 ML. (10.3 FL. OZ.)
SEAL, OIL (SGL. LIP) (.525" WIDE)
ENGINE OVER SPEED SENSOR/SWITCH(EDG) GOVERNOR ASSY. (ELECTRIC)
PYROMETER
SCANNER
Industrial Engineers And Manufacturers
YEOMAN MARINE PRIVATE LIMITED
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .